Putting Dana 60 in my 68..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C/20inCA · 10-05-2004, 01:32 PM

I found a Dana 60 rear end with 3:54's in it out of a 72 3/4 ton. That'll be much better than the 4:56's that are in there now. Especially since i put a Muncie 4 speed in it. Since i don't need the old one, what should i do with it? The drums are good, along with everything else.

da-burb · 10-05-2004, 02:23 PM

If you have the room, keep the drums and the center section. You will find someone in need of the drums and bearings(the real expensive parts to replace). Toss/recycle the rest.

10-05-2004, 01:32 PM	#1
C/20inCA Registered User Join Date: Mar 2004 Location: San Jose, CA Posts: 12	Putting Dana 60 in my 68..... I found a Dana 60 rear end with 3:54's in it out of a 72 3/4 ton. That'll be much better than the 4:56's that are in there now. Especially since i put a Muncie 4 speed in it. Since i don't need the old one, what should i do with it? The drums are good, along with everything else.

10-05-2004, 02:23 PM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	If you have the room, keep the drums and the center section. You will find someone in need of the drums and bearings(the real expensive parts to replace). Toss/recycle the rest. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.