|
10-12-2004, 09:04 AM
|
#1 |
|
Senior Member
 
Join Date: Apr 2001
Location: Alexandria, MN
Posts: 1,462
|
4bbl intake needed
does anybody have an old eiher cast or aluminum 4bbl intake for a chevy small block WITH the oil filler tube and cap??? I would like to add the script chevrolet valve covers w/o breather or filler holes to a 305 to swap in place of my 250??? thanks...
--Mike
__________________
63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's |
|
|
|
10-12-2004, 09:31 AM
|
#2 |
|
Account Suspended
Join Date: Dec 2003
Location: Texas
Posts: 2,686
|
Ive got some old cast iron ones with oil fill.
|
|
|
|
|
10-12-2004, 10:16 AM
|
#3 |
|
Truck Farmer
Join Date: Nov 2001
Location: Lake Havasu City, Arizona
Posts: 1,192
|
I have both, but you wouldn't want to run the valve covers without a PCV valve though. Things could get messy with a frount fill.
__________________
Arizona rust free sheetmetal |
|
|
|
|
10-12-2004, 10:21 AM
|
#4 |
|
Registered User
Join Date: Oct 2004
Location: central missouri
Posts: 215
|
if you run no pvc you better at least run a vented cap,if you dont run one or the other you'll blow intake gaskets and oil will go everywhere.i have 4bbl intake but none with fillers
|
|
|
|
|
10-12-2004, 08:46 PM
|
#5 |
|
Senior Member
Join Date: Apr 2001
Location: Alexandria, MN
Posts: 1,462
|
Well ive seen some witht e PCV valve run right into the oil fill tube....cant remember what it was off of though... any sugggestions??? and i may have a line on a manifold here in MN but i need the filler tube with PCV... thanks for the help..
--Mike
__________________
63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's |
|
|
|
|
10-12-2004, 08:58 PM
|
#6 |
|
Registered User
Join Date: Oct 2004
Location: central missouri
Posts: 215
|
you do not have to have it right in the tube,you just gotta have a means of venting the top end.either through a vented oil fill cap on the valve cover(mr.gasket makes em),or a pcv in the valve cover....
|
|
|
|
|
10-12-2004, 09:16 PM
|
#7 |
|
Registered User
Join Date: Aug 2004
Location: Abilene Tx
Posts: 39
|
I Have A Cast One In Good Shape. Take $25 + The Ride From Abilene Tx 79601. Was Going To Put On E-bay But This Is Just As Easy. Can E-mail Pic If You Need. Part # Is 3905393. I Think It Came From A Old Malibu With 327
|
|
|
|
|
10-12-2004, 10:44 PM
|
#8 |
|
Senior Member
Join Date: Jan 2004
Location: SE Ohio
Posts: 1,121
|
filler tube vent
Had one from factory in my 66 vette with L79 I would assume all of thees engines both vette and nova would have them Mike
__________________
hav'n fun be'n me 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
