WTB Fatman Stage III kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PTS Kustoms · 10-15-2004, 11:57 AM

Hello!

Looking for a good deal on a Fatman Fab Stage III front crossmember kit with stainless arms, chrome coil over shocks, and sway bar. Needs to be for a 71 Chevy 1/2 ton frame.

Thanks,

Perry

john@thepier · 10-15-2004, 12:04 PM

I don't know where you can find a deal.fatman will sell you one for about $2445.00.I have never seen anyone but fatman selling fatman stuff. their phone # is 1-704-545-0369 ,also they prefer to talk to you no order sheets at this co.

*FormerMember* · 10-15-2004, 12:05 PM

What's the Fatman site?

NPilot1975 · 10-15-2004, 12:52 PM

http://www.fatmanfab.com/

*FormerMember* · 10-15-2004, 12:53 PM

Quote:

Originally Posted by NPilot1975

http://www.fatmanfab.com/

Thanks!

68LSS1 · 10-15-2004, 01:04 PM

Like I keep saying, give Ed @ Mothertruckers a call. I went through Fatman directly before I knew Ed was a authorized dealer and he could of saved me some money then. Link in sig.

How's the HTH kit installation coming?

PTS Kustoms · 10-15-2004, 03:58 PM

Thanks! I did e-mail Ed but have not got a reply. The rear 2x3 crossmember is in and right now I am mocking up the rear stainless fuel cell from ECE. I will install the panhard bracket this weekend. Thanks for asking...

Thanks,

Perry
PTS

10-15-2004, 11:57 AM	#1
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	WTB Fatman Stage III kit Hello! Looking for a good deal on a Fatman Fab Stage III front crossmember kit with stainless arms, chrome coil over shocks, and sway bar. Needs to be for a 71 Chevy 1/2 ton frame. Thanks, Perry

10-15-2004, 12:04 PM	#2
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	I don't know where you can find a deal.fatman will sell you one for about $2445.00.I have never seen anyone but fatman selling fatman stuff. their phone # is 1-704-545-0369 ,also they prefer to talk to you no order sheets at this co. Last edited by john@thepier; 10-15-2004 at 12:07 PM.

10-15-2004, 12:52 PM	#4
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	http://www.fatmanfab.com/ __________________ 1972 Blazer body...need to get a thread started for the rest of the story

10-15-2004, 01:04 PM	#6
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Like I keep saying, give Ed @ Mothertruckers a call. I went through Fatman directly before I knew Ed was a authorized dealer and he could of saved me some money then. Link in sig. How's the HTH kit installation coming? __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc Last edited by 68LSS1; 10-15-2004 at 01:08 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-15-2004, 12:05 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	What's the Fatman site?

10-15-2004, 03:58 PM	#7
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Thanks! I did e-mail Ed but have not got a reply. The rear 2x3 crossmember is in and right now I am mocking up the rear stainless fuel cell from ECE. I will install the panhard bracket this weekend. Thanks for asking... Thanks, Perry PTS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.