Roll call... 1962's! - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigdogboxers · 05-01-2012, 03:46 PM

Posted via Mobile Device
Its been a while but here is a few new pictures of mine.
Posted via Mobile Device

robber grin · 05-01-2012, 06:34 PM

My old 62 at a local cruise and my new 62 in the garage as of today...

1Bad62Pro/Street · 05-01-2012, 06:37 PM

Quote:

Originally Posted by robber grin

My old 62 at a local cruise and my new 62 in the garage as of today...

Ghost Flames!

bigdogboxers · 05-01-2012, 06:49 PM

62 in garage a gmc?
Posted via Mobile Device

robber grin · 05-01-2012, 08:10 PM

Quote:

Originally Posted by bigdogboxers

62 in garage a gmc?
Posted via Mobile Device

Nope ~ a 62 C10

robber grin · 05-01-2012, 08:14 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Ghost Flames!

Pin-flamed by Dick Bizarro at Nigro's Tuesday Night Cruise in East McKeesport PA many moons ago...

bigdogboxers · 05-01-2012, 08:18 PM

Didn't think the Chevy trucks had a boxed in front frame.
Posted via Mobile Device

robber grin · 05-01-2012, 08:21 PM

Quote:

Originally Posted by bigdogboxers

Didn't think the Chevy trucks had a boxed in front frame.
Posted via Mobile Device

60 - 62 did I've been told.

Both my 62's had this frame.

bigdogboxers · 05-01-2012, 08:38 PM

I was told only the gmc truck because of the torque the big block v6 motors had.
Posted via Mobile Device

robber grin · 05-02-2012, 08:42 AM

I'm not too sure on that but both my 62 Chevy's had this frame and I know I never made more torque than any open frame could have handled.

I actually prefer the 63-72 style - open or "channel" frame from a build-perspective - Easier to make upgrades, clean, prep, paint, plumb, etc. at home... I.M.H.O.

It is what it is.

My truck and I share "birth" years so I'm going to stay with the 62...

at least until another rusted Chevy truck becomes available ;^)

LostMy65 · 05-02-2012, 09:19 AM

My 65 is on a 62 frame:

Posted via Mobile Device

1Bad62Pro/Street · 05-02-2012, 10:05 AM

Here is all the info on the Frame Used in 1960-1966.
==========================================================
General Motors Corp. - gmheritagecenter.com
Chevrolet Trucks (All Models Not Listed Below)
http://www.gmheritagecenter.com/gm-h...tion-kits.html
==========================================================
Frame swapping is popular now.

a37lesalle · 05-04-2012, 08:32 AM

Here I am on the roll call. Still cannot get pics up but I have a 62 C-10 Fleetside, 283, 3 on the tree that I put on the floor. Still work in progress but getting there.

1Bad62Pro/Street · 05-04-2012, 08:38 AM

Quote:

Originally Posted by a37lesalle

Here I am on the roll call. Still cannot get pics up but I have a 62 C-10 Fleetside, 283, 3 on the tree that I put on the floor. Still work in progress but getting there.

Here ya go Bud!
Pictures In your Posts
http://67-72chevytrucks.com/vboard/s...d.php?t=501039
Also look here:
http://67-72chevytrucks.com/vboard/f...splay.php?f=33

jg09 · 05-08-2012, 03:17 AM

here's mine, it's a c20 with a flatbed. i use it as a work truck, but i'd like to do a bit of work on it to restore it a bit and make it a little nicer. It's not a '62 cab, but it's been registered as a '62 by the washington state patrol.

robber grin · 05-08-2012, 03:43 PM

Hay jg09... Nice looking "62" and love the color too!

1963c-10 · 05-08-2012, 04:57 PM

Yeah, looks like somebody has some work cut out for them too moving all the hay

jg09 · 05-09-2012, 03:27 AM

Quote:

Originally Posted by robber grin

Hay jg09... Nice looking "62" and love the color too!

Thanks!

Quote:

Originally Posted by 1963c-10

Yeah, looks like somebody has some work cut out for them too moving all the hay

This picture does the load no justice since it was unevenly stacked. most of it was hanging off the passenger side. when we were moving it, i was over the yellow line on one side and the hay on the other side was still smacking the reflectors on the side of the road.

Here's another picture of it, a little better quality

**62 Longbed** · 05-09-2012, 06:13 AM

You made me question my 62 frame ... Its boxed as well ... I'm sure all the Chevy and GMC frames were the same once manufactored .. But after arriving at the Chevy or GMC Assem. Plant , That is probably where things changed ... Coil Springs / Leaf Springs , Motor Mounts , ETC ..

1Bad62Pro/Street · 05-28-2012, 07:56 PM

1962 Chevrolet C10 pickup - YouTube

1Bad62Pro/Street · 05-30-2012, 09:20 PM

Faxon Auto Literature
http://www.faxonautoliterature.com/Search.aspx?c=18495

Trap62 · 05-31-2012, 03:51 AM

Here's my 1962. Bought it last August in Wenatchee, WA (pic 1) and hauled it over the Cascades to its new home in Gig Harbor. As you can see, it's a SWB, BBW side stepper that looks pretty rough but seemed to have benefitted living in the dryer climes east of the Cascades. Have found a wealth of information from this forum the last 10 months and will be posting some questions for things that I was unable to find while searching.

m455sx · 05-31-2012, 07:17 AM

Heres my Blue 62. Does anybody have a count of how many there really are?

1Bad62Pro/Street · 05-31-2012, 11:19 AM

Quote:

Originally Posted by m455sx

Heres my Blue 62. Does anybody have a count of how many there really are?

m455sx,

I like your truck.
A couple of questions.
Where did you get the fog lights?
They look old school and blend in very well.
Are those bumper guards originally for '62?
What type of hood ornament is that on your truck?

1Bad,

m455sx · 05-31-2012, 03:31 PM

Quote:

Originally Posted by 1Bad62Pro/Street

m455sx,

I like your truck.
A couple of questions.
Where did you get the fog lights?
They look old school and blend in very well.
Are those bumper guards originally for '62?
What type of hood ornament is that on your truck?

1Bad,

The fog lights are Unity brand and but were on truck for decades. The truck is from Martinsville Va and that is how the majority of the old trucks look down there. Yes those are factory Bumber Guards. The hood ornament is a repro from a 1970 or 71 Monte Carlo. I can get you more photo's if anybody needs them.

05-01-2012, 03:46 PM	#226
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: Roll call... 1962's! Posted via Mobile Device Its been a while but here is a few new pictures of mine. Posted via Mobile Device Attached Images

05-01-2012, 06:34 PM	#227
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: Roll call... 1962's! My old 62 at a local cruise and my new 62 in the garage as of today... Attached Images

05-01-2012, 06:49 PM	#229
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: Roll call... 1962's! 62 in garage a gmc? Posted via Mobile Device

05-01-2012, 08:18 PM	#232
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: Roll call... 1962's! Didn't think the Chevy trucks had a boxed in front frame. Posted via Mobile Device

05-01-2012, 08:38 PM	#234
bigdogboxers Registered User Join Date: Aug 2009 Location: Rathdrum Idaho Posts: 197	Re: Roll call... 1962's! I was told only the gmc truck because of the torque the big block v6 motors had. Posted via Mobile Device

05-02-2012, 08:42 AM	#235
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: Roll call... 1962's! I'm not too sure on that but both my 62 Chevy's had this frame and I know I never made more torque than any open frame could have handled. I actually prefer the 63-72 style - open or "channel" frame from a build-perspective - Easier to make upgrades, clean, prep, paint, plumb, etc. at home... I.M.H.O. It is what it is. My truck and I share "birth" years so I'm going to stay with the 62... at least until another rusted Chevy truck becomes available ;^)

05-02-2012, 09:19 AM	#236
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Roll call... 1962's! My 65 is on a 62 frame: Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-02-2012, 10:05 AM	#237
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Roll call... 1962's! Here is all the info on the Frame Used in 1960-1966. ========================================================== General Motors Corp. - gmheritagecenter.com Chevrolet Trucks (All Models Not Listed Below) http://www.gmheritagecenter.com/gm-h...tion-kits.html ========================================================== Frame swapping is popular now. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 05-02-2012 at 10:51 AM.

05-04-2012, 08:32 AM	#238
a37lesalle Registered User Join Date: Mar 2012 Location: Bakersfield calif Posts: 40	Re: Roll call... 1962's! Here I am on the roll call. Still cannot get pics up but I have a 62 C-10 Fleetside, 283, 3 on the tree that I put on the floor. Still work in progress but getting there.

05-08-2012, 03:17 AM	#240
jg09 Registered User Join Date: Sep 2011 Location: Nooksack, WA Posts: 8	Re: Roll call... 1962's! here's mine, it's a c20 with a flatbed. i use it as a work truck, but i'd like to do a bit of work on it to restore it a bit and make it a little nicer. It's not a '62 cab, but it's been registered as a '62 by the washington state patrol.

05-08-2012, 03:43 PM	#241
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: Roll call... 1962's! Hay jg09... Nice looking "62" and love the color too!

05-08-2012, 04:57 PM	#242
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Roll call... 1962's! Yeah, looks like somebody has some work cut out for them too moving all the hay __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-09-2012, 06:13 AM	#244
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: Roll call... 1962's! You made me question my 62 frame ... Its boxed as well ... I'm sure all the Chevy and GMC frames were the same once manufactored .. But after arriving at the Chevy or GMC Assem. Plant , That is probably where things changed ... Coil Springs / Leaf Springs , Motor Mounts , ETC .. Attached Images

05-30-2012, 09:20 PM	#246
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Roll call... 1962's! Faxon Auto Literature http://www.faxonautoliterature.com/Search.aspx?c=18495 __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

05-31-2012, 03:51 AM	#247
Trap62 Registered User Join Date: Nov 2011 Location: Gig Harbor, WA Posts: 52	Re: Roll call... 1962's! Here's my 1962. Bought it last August in Wenatchee, WA (pic 1) and hauled it over the Cascades to its new home in Gig Harbor. As you can see, it's a SWB, BBW side stepper that looks pretty rough but seemed to have benefitted living in the dryer climes east of the Cascades. Have found a wealth of information from this forum the last 10 months and will be posting some questions for things that I was unable to find while searching. Attached Images



Register or Log In To remove these advertisements.

05-31-2012, 07:17 AM	#248
m455sx Registered User Join Date: Nov 2011 Location: powhatan virginia Posts: 402	Re: Roll call... 1962's! Heres my Blue 62. Does anybody have a count of how many there really are? Attached Images __________________ 1970 442 convertible 1970 Cutlass SX 1962 Chevy Stepside 2011 GMC 3500HD Crewcab SLT DRW

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.