Not another build thread! Progress on my '67 - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 02-28-2009, 11:58 PM

The rear fenders are really nice too, they just need a couple small patches. I stripped these myself many years ago, they are very straight and have minimal bondo.

67ChevyRedneck · 03-01-2009, 12:02 AM

All tucked away...

67ChevyRedneck · 03-01-2009, 12:06 AM

I think these will be my last pic postings in this thread..........

I hope to start a new one sometime this year when I start work on all of the parts I've acquired!

oldblue1968chevy · 03-01-2009, 04:49 PM

another truck??!

67ChevyRedneck · 03-01-2009, 11:24 PM

No, start another build thread for my current truck. I'll be the first to admit that my truck was a total quickie. It was a dash to get it drivable with decent paint buying as many upgrades and parts as I could before I got married and the wife put the hammer down on my spending

The 67 is going to undergo another transformation. It's going to be a dropped fleetside (I'm thinking 3.5/5 with the same rims/tires it has now) with the correct 67-68 side trim. I basically want a 67 CST Fleetside clone. The good news is that I have this large stash of parts that I can work on, get all cleaned up, replace the rust, and get ready for paint long before I ever touch the currently "finished" truck. She'll probably "look the same" for another 2 years or so. I'm going to take my time this time, and yes, that means an eventual... frame off...

Richard8971 · 10-20-2009, 09:14 PM

Quote:

Originally Posted by 67ChevyRedneck

No, start another build thread for my current truck. I'll be the first to admit that my truck was a total quickie.

Hmmmm. Looks like you and me have something in common. When I got my truck it was an old farm truck used in Oregon. It spent it's whole life out in the rain and yuck.

They make such nice aftermarket repop parts (for our trucks) now that it doesn't make much sence to me to find factory parts. I want to replace the pieces that were the most damaged... oh wait, that's just about everything.

Keep us posted on the redo progress. If you did such nice work on a "quickie", I can't wait to see how she turns out when you take your time. It will be awesome I bet!

Don

stueber68 · 05-25-2009, 04:31 PM

Well the truck came out extremely nice. I only have two complaints... 1, it's not mine. 2, you had said earlier in the thread that you were not building a show truck. on that you have failed because this is a beautiful build.

bigguy69 · 05-25-2009, 07:30 PM

looking forward to the next verison!

67ChevyRedneck · 05-28-2009, 10:27 AM

Thanks guys, I'm looking forward to version 2.0 myself

I got the garage... but now I have to finish the house remodel (The majority of the work and changes were my idea, not my wifes, I'm really picky.)

**Palf70Step** · 05-28-2009, 12:01 PM

Quote:

Originally Posted by 67ChevyRedneck

Thanks guys, I'm looking forward to version 2.0 myself

I got the garage... but now I have to finish the house remodel (The majority of the work and changes were my idea, not my wifes, I'm really picky.)

That's the problem with you CE guys, always wanting to change a perfectly good building.

my67chevytruck · 05-28-2009, 12:59 PM

^^^ Isn't that Called Being ANAL....

67ChevyRedneck · 05-28-2009, 10:56 PM

Quote:

Originally Posted by my67chevytruck

^^^ Isn't that Called Being ANAL....

I was SOOOOOO close to actually saying that in my post... but decided against it, but I guess it's fairly obvious

BTW, the garage, NO WHERE NEAR that clean now. It's crammed full of my storage unit stuff, truck parts, a trailer full of yard equipment, and hopefully, with some rearranging, the 67 will fit in there again until I can put all of the stuff in the house

**mongocanfly** · 07-03-2019, 02:47 AM

congrats on totm Jesse...!!!!!!!!

67ChevyRedneck · 10-20-2009, 11:18 PM

Thanks Don. Every time this gets bumped there's like another thousand views... and nothing to see

Maybe some new members will see it and enjoy it.

I've just been driving it lately. I did get some fender well patches from NM from Hart_Rob so I can fix my fleet bed if I ever get it home. I'm currently remodeling my house which is taking forever

nuke1 · 02-22-2010, 02:14 PM

BUMP. BUMP. BUMP. BUMP. That should be good for a few more thousand views.

Trishoregon · 02-23-2010, 07:41 PM

Help! My dad gave me a 1967 GMC 351E. Yes 351E. It runs great. Strong motor. He used it for what it was intended. My issure is the 351E. No ne seems to have hears of it and I need a exhaust manifold for it. Any suggestions?

Tynee · 03-01-2010, 12:04 PM

Trish,
WELCOME TO THE BOARD!!! You would ordinarily have gotten a response or 12 by now, but this is sort of an old thread, so people don't respond as quickly as they did when it was newer.

I hope you've found your answer, or your part, by now. In case you haven't, the best suggestion I can make is to hit the "subscribe" button at the top of any page on the boards, and pay the $25. Then you can post a "WTB" (wanted to buy) ad in the classifieds. If anybody out there has a manifold for a 351, this board is the place to find them.

BTW, you can access the classifieds, and reply to ads without subscribing, but if you want to start a new thread in there, you'll have to pony up first.

Welcome again, and good luck!! If you need anything else, click on my name, then click on "send a private message to Tynee." I'll do my best to help you out.

*highperf4x4* · 03-17-2010, 12:39 AM

I like it!!!!!!!!!

Better late than never right?

67chevy1series · 06-16-2010, 07:06 PM

your gonna convert to fleet if so cool ilike fleet better if not then your truck is still cool

67ChevyRedneck · 06-17-2010, 07:35 PM

Woah, new replies

No, sorry, I have no idea what a 351E is, sounds like a Ford engine

Yep, someday! I have all the parts I need to do a proper rebuild, but now I have a 67 Firebird that's next in line, so she'll be a stepside for a hell of a lot longer

Thanks all

I still drive the piss out of it. Since done, it's been to Tennessee once and North Carolina a bunch of times. I think I've put around 14-15K on it since 2006.

bigguy69 · 06-17-2010, 10:49 PM

looks good. i always liked that truck.

67chevy1series · 06-19-2010, 06:08 AM

ya it looks cool

nuke1 · 06-22-2010, 05:17 AM

Now that is what I am talking about!!!! just look at those projects in that driveway, nothing better than a bird and the the truck, now get to work and lets see that hing get done!!!!!

JustCallMeDrew · 10-16-2014, 10:35 PM

I know im bringing up a old thread i just read through this entire thread for like the 3rd time and its one of my favorite trucks and i was wondering what ever happened to it?

67ChevyRedneck · 10-20-2014, 01:47 AM

Thanks!

I've owned the truck for 18 years. She still gets driven regularly. She's been parked outside 24/7 for the past 18 years, so she's not quite as pretty as she was in 2006 after the repaint but still looks pretty good.

I bought her a buddy to hang out with. If I can ever finish with this new pile o crap (te hee) the truck is getting a rebuild. The mustang has had A LOT done to it. A/C. Complete front suspension rebuild. Complete interior overhaul, and I swapped it from a auto to a 5 speed manual.

Day I brought the car home... kinda looks like an "old man car" doesn't it? Well, it was, the PO was in his mid 70s when he sold it to the dealer I bought it from (does the truck look pissed to you?):

... and recent...

The last pic of the truck was taken just a few weeks ago with me behind the wheel at a club event.

02-28-2009, 11:58 PM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 The rear fenders are really nice too, they just need a couple small patches. I stripped these myself many years ago, they are very straight and have minimal bondo. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-02-2009 at 12:44 AM.

03-01-2009, 12:02 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 All tucked away... Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-01-2009, 12:06 AM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 I think these will be my last pic postings in this thread.......... I hope to start a new one sometime this year when I start work on all of the parts I've acquired! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-01-2009, 04:49 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Not another build thread! Progress on my '67 another truck??! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-01-2009, 11:24 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 No, start another build thread for my current truck. I'll be the first to admit that my truck was a total quickie. It was a dash to get it drivable with decent paint buying as many upgrades and parts as I could before I got married and the wife put the hammer down on my spending The 67 is going to undergo another transformation. It's going to be a dropped fleetside (I'm thinking 3.5/5 with the same rims/tires it has now) with the correct 67-68 side trim. I basically want a 67 CST Fleetside clone. The good news is that I have this large stash of parts that I can work on, get all cleaned up, replace the rust, and get ready for paint long before I ever touch the currently "finished" truck. She'll probably "look the same" for another 2 years or so. I'm going to take my time this time, and yes, that means an eventual... frame off... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-01-2009 at 11:28 PM.

05-25-2009, 04:31 PM	#7
stueber68 1968 C20 Vortec Beast Join Date: Jun 2005 Location: STILLWATER,OKLAHOMA Posts: 483	Re: Not another build thread! Progress on my '67 Well the truck came out extremely nice. I only have two complaints... 1, it's not mine. 2, you had said earlier in the thread that you were not building a show truck. on that you have failed because this is a beautiful build. __________________ Ugly or not it still kicks a**!

05-25-2009, 07:30 PM	#8
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Not another build thread! Progress on my '67 looking forward to the next verison! __________________ members met: redbaron69, billsbowtie,nc67

05-28-2009, 10:27 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Thanks guys, I'm looking forward to version 2.0 myself I got the garage... but now I have to finish the house remodel (The majority of the work and changes were my idea, not my wifes, I'm really picky.) __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-28-2009 at 10:30 AM.

05-28-2009, 12:59 PM	#11
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Not another build thread! Progress on my '67 ^^^ Isn't that Called Being ANAL.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 05-28-2009 at 12:59 PM.

07-03-2019, 02:47 AM	#13
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,663	Re: Not another build thread! Progress on my '67 congrats on totm Jesse...!!!!!!!! __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

10-20-2009, 11:18 PM	#14
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Thanks Don. Every time this gets bumped there's like another thousand views... and nothing to see Maybe some new members will see it and enjoy it. I've just been driving it lately. I did get some fender well patches from NM from Hart_Rob so I can fix my fleet bed if I ever get it home. I'm currently remodeling my house which is taking forever __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-22-2010, 02:14 PM	#15
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Not another build thread! Progress on my '67 BUMP. BUMP. BUMP. BUMP. That should be good for a few more thousand views. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-23-2010, 07:41 PM	#16
Trishoregon Registered User Join Date: Feb 2010 Location: Salem Oregon Posts: 3	Re: Not another build thread! Progress on my '67 Help! My dad gave me a 1967 GMC 351E. Yes 351E. It runs great. Strong motor. He used it for what it was intended. My issure is the 351E. No ne seems to have hears of it and I need a exhaust manifold for it. Any suggestions? Last edited by Trishoregon; 02-23-2010 at 07:41 PM.

03-01-2010, 12:04 PM	#17
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Not another build thread! Progress on my '67 Trish, WELCOME TO THE BOARD!!! You would ordinarily have gotten a response or 12 by now, but this is sort of an old thread, so people don't respond as quickly as they did when it was newer. I hope you've found your answer, or your part, by now. In case you haven't, the best suggestion I can make is to hit the "subscribe" button at the top of any page on the boards, and pay the $25. Then you can post a "WTB" (wanted to buy) ad in the classifieds. If anybody out there has a manifold for a 351, this board is the place to find them. BTW, you can access the classifieds, and reply to ads without subscribing, but if you want to start a new thread in there, you'll have to pony up first. Welcome again, and good luck!! If you need anything else, click on my name, then click on "send a private message to Tynee." I'll do my best to help you out. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

03-17-2010, 12:39 AM	#18
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: Not another build thread! Progress on my '67 I like it!!!!!!!!! Better late than never right?



Register or Log In To remove these advertisements.

06-16-2010, 07:06 PM	#19
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Not another build thread! Progress on my '67 your gonna convert to fleet if so cool ilike fleet better if not then your truck is still cool

06-17-2010, 07:35 PM	#20
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Woah, new replies No, sorry, I have no idea what a 351E is, sounds like a Ford engine Yep, someday! I have all the parts I need to do a proper rebuild, but now I have a 67 Firebird that's next in line, so she'll be a stepside for a hell of a lot longer Thanks all I still drive the piss out of it. Since done, it's been to Tennessee once and North Carolina a bunch of times. I think I've put around 14-15K on it since 2006. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 06-18-2010 at 01:58 AM.

06-17-2010, 10:49 PM	#21
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Not another build thread! Progress on my '67 looks good. i always liked that truck. __________________ members met: redbaron69, billsbowtie,nc67

06-19-2010, 06:08 AM	#22
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Not another build thread! Progress on my '67 ya it looks cool

06-22-2010, 05:17 AM	#23
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Not another build thread! Progress on my '67 Now that is what I am talking about!!!! just look at those projects in that driveway, nothing better than a bird and the the truck, now get to work and lets see that hing get done!!!!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

10-16-2014, 10:35 PM	#24
JustCallMeDrew Registered User Join Date: Apr 2014 Location: Greensboro, NC Posts: 58	Re: Not another build thread! Progress on my '67 I know im bringing up a old thread i just read through this entire thread for like the 3rd time and its one of my favorite trucks and i was wondering what ever happened to it? __________________ 1968 Chevorlet C10 work in progress no build thread yet!

10-20-2014, 01:47 AM	#25
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Not another build thread! Progress on my '67 Thanks! I've owned the truck for 18 years. She still gets driven regularly. She's been parked outside 24/7 for the past 18 years, so she's not quite as pretty as she was in 2006 after the repaint but still looks pretty good. I bought her a buddy to hang out with. If I can ever finish with this new pile o crap (te hee) the truck is getting a rebuild. The mustang has had A LOT done to it. A/C. Complete front suspension rebuild. Complete interior overhaul, and I swapped it from a auto to a 5 speed manual. Day I brought the car home... kinda looks like an "old man car" doesn't it? Well, it was, the PO was in his mid 70s when he sold it to the dealer I bought it from (does the truck look pissed to you?): ... and recent... The last pic of the truck was taken just a few weeks ago with me behind the wheel at a club event. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.