Jimbo's 67 Long bed step side build - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldman3** · 06-08-2011, 04:58 PM

Pic 1 Painting the inside of cab with encapsulator paint.

Pic 2 Front part of inside of cab.

**oldman3** · 06-08-2011, 05:01 PM

Pic 1 Making new trans cover to fit 700R4

Pic 2 It was made in a couple pieces, in case we need to get to shifter parts.

Pic 3 Another view.

**oldman3** · 06-08-2011, 05:04 PM

Pic 1 Making mount for Lokar emergency brake handle.

Pic 2 Close up view.

Pic 3 Handle in place.

Pic 4 Another view.

**oldman3** · 06-08-2011, 05:06 PM

Pic 1 Doing more finish work on lower part of firewall.

Pic 2 Still working on back of cab.

**oldman3** · 06-08-2011, 05:11 PM

Pic 1 Started making up the exhaust system, drivers side. Used 2-1/2" pipe.

Pic 2 More of exhaust system.

Pic 3 Routing over the axle, etc.

Pic 4 Not to clear, but you can see some of it.

Pic 5 Pass. side has been tacked in place.

**oldman3** · 06-08-2011, 05:15 PM

Pic 1 Bracket made to support pipe.

Pic 2 This is my home made isolators, work very well.

Pic 3 Showing both sides in place.

Pic 4 Bothe sides done.

Pic 5 Mount and flanged, so it can be taken apart for coating.

**oldman3** · 06-08-2011, 05:18 PM

Pic 1 Flange, bracket combo at muffler.

Pic 2 Bracket for back part of exhaust.

Pic 3 Doing final welding.

**oldman3** · 06-08-2011, 05:21 PM

Pic 1 Exhaust all disassembled.

Pic 2 Box for shipping to HPC in Oklahoma City, Okla.

Pic 3 All parts in box ready to go.

**oldman3** · 06-08-2011, 05:22 PM

Hope you enjoyed todays post, see you tomorrow.......Jim

bollybib · 06-08-2011, 09:59 PM

Pretty neat. Nice to see some shiny stuff peeking at us now.

I'm fitting up a dual exhaust kit right now (without welding capability), so it's refreshing to watch you cut and fit as you like.

It looks like you have experience working with many types of materials, too. That always comes in handy.

Did you work in a GM St. Louis plant by any chance ?

Your fan,

Jim

**oldman3** · 06-09-2011, 09:54 AM

Quote:

Originally Posted by bollybib

Pretty neat. Nice to see some shiny stuff peeking at us now.

I'm fitting up a dual exhaust kit right now (without welding capability), so it's refreshing to watch you cut and fit as you like.

It looks like you have experience working with many types of materials, too. That always comes in handy.

Did you work in a GM St. Louis plant by any chance ?

Your fan,

Jim

Hey Jim, thanks for the comments. No on the St. Louis plant, worked in the Detroit area plants. Detroit Forge and Gear & Axle, I was an Environmental Engineer, so don't know a lot about the other stuff.......Jim

spike38 · 06-09-2011, 04:12 PM

Great build!!!

Look forward to your future updates.

Spike

**oldman3** · 06-09-2011, 07:01 PM

Quote:

Originally Posted by spike38

Great build!!!

Look forward to your future updates.

Spike

Thanks for the compliment Spike, next update starting now.....Jim

**oldman3** · 06-09-2011, 07:05 PM

Pic 1 Mocking up AC, alt, and power steering brackets before removing engine for clean up.

Pic 2 This is the 327 engine, getting ready to tear apart for checking and clean up, etc.

**oldman3** · 06-09-2011, 07:08 PM

Pic 1 Bottom of cab in epoxy primer.

Pic 2 The next day bottom of cab being sprayed in regular primer.

Pic 3 Another view, all in regular primer.

**oldman3** · 06-09-2011, 07:11 PM

Pic 1 Taped up and ready to spray cab with epoxy primer.

Pic 2 From view.

Pic 3 All in epoxy primer

Pic 4 Front view in epoxy primer.

**oldman3** · 06-09-2011, 07:14 PM

Pic 1 The next day it was sprayed with regular primer.

Pic 2 Front view.

Pic 3 The next day started blocking regular primer.

**oldman3** · 06-09-2011, 07:19 PM

Pic 1 My son Mark modifing old engie mounts to clear headers.

Pic 2 Drivers side was already cut.

Pic 3 Both sides done, added angle iron to original mount and then bolted on at bottom of frame lip, needed it this way for header clearance.

Pic 4 Close up view. A little grinding and filler, should look good.

**oldman3** · 06-09-2011, 07:22 PM

Pic 1 Cab sprayed with regular primer again, with guide coat.

Pic 2 Cab ready for final sanding.

**oldman3** · 06-09-2011, 07:25 PM

Pic 1 Disassembly of frame for sand blasting.

Pic 2 Removing some of the old greasy crap from front crossmember.

**oldman3** · 06-09-2011, 07:26 PM

Well that should keep you picture junkies happy till tomorrow..............Jim

Cameron 1137 · 06-09-2011, 07:51 PM

NO! we want more! haha, JK, looks great so far!

**oldman3** · 06-09-2011, 11:27 PM

Quote:

Originally Posted by Cameron 1137

NO! we want more! haha, JK, looks great so far!

Thanks for following the build......Jim

bollybib · 06-10-2011, 02:33 PM

wow i never thought of myself as a picture junkie until now...

i'm a little relieved that you didn't work in St. Louis plant so i won't be tempted to pump you for assembly info haha

movin' right along lookin' fine.

jim

**oldman3** · 06-10-2011, 09:03 PM

Quote:

Originally Posted by bollybib

wow i never thought of myself as a picture junkie until now...

i'm a little relieved that you didn't work in St. Louis plant so i won't be tempted to pump you for assembly info haha

movin' right along lookin' fine.

jim

Looks to me like your doing pretty good with the info......Jim

06-08-2011, 04:58 PM	#251
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Painting the inside of cab with encapsulator paint. Pic 2 Front part of inside of cab. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:01 PM	#252
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Making new trans cover to fit 700R4 Pic 2 It was made in a couple pieces, in case we need to get to shifter parts. Pic 3 Another view. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:04 PM	#253
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Making mount for Lokar emergency brake handle. Pic 2 Close up view. Pic 3 Handle in place. Pic 4 Another view. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:06 PM	#254
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Doing more finish work on lower part of firewall. Pic 2 Still working on back of cab. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:11 PM	#255
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Started making up the exhaust system, drivers side. Used 2-1/2" pipe. Pic 2 More of exhaust system. Pic 3 Routing over the axle, etc. Pic 4 Not to clear, but you can see some of it. Pic 5 Pass. side has been tacked in place. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:15 PM	#256
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Bracket made to support pipe. Pic 2 This is my home made isolators, work very well. Pic 3 Showing both sides in place. Pic 4 Bothe sides done. Pic 5 Mount and flanged, so it can be taken apart for coating. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:18 PM	#257
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Flange, bracket combo at muffler. Pic 2 Bracket for back part of exhaust. Pic 3 Doing final welding. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:21 PM	#258
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Exhaust all disassembled. Pic 2 Box for shipping to HPC in Oklahoma City, Okla. Pic 3 All parts in box ready to go. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 05:22 PM	#259
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Hope you enjoyed todays post, see you tomorrow.......Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-08-2011, 09:59 PM	#260
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: Jimbo's 67 Long bed step side build Pretty neat. Nice to see some shiny stuff peeking at us now. I'm fitting up a dual exhaust kit right now (without welding capability), so it's refreshing to watch you cut and fit as you like. It looks like you have experience working with many types of materials, too. That always comes in handy. Did you work in a GM St. Louis plant by any chance ? Your fan, Jim __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911 Last edited by bollybib; 06-08-2011 at 11:11 PM.

06-09-2011, 04:12 PM	#262
spike38 Registered User Join Date: Jun 2010 Location: Leesburg GA Posts: 547	Re: Jimbo's 67 Long bed step side build Great build!!! Look forward to your future updates. Spike __________________ 68 stepside http://67-72chevytrucks.com/vboard/s...0&goto=newpost

06-09-2011, 07:05 PM	#264
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Mocking up AC, alt, and power steering brackets before removing engine for clean up. Pic 2 This is the 327 engine, getting ready to tear apart for checking and clean up, etc. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:08 PM	#265
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Bottom of cab in epoxy primer. Pic 2 The next day bottom of cab being sprayed in regular primer. Pic 3 Another view, all in regular primer. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:11 PM	#266
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Taped up and ready to spray cab with epoxy primer. Pic 2 From view. Pic 3 All in epoxy primer Pic 4 Front view in epoxy primer. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:14 PM	#267
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 The next day it was sprayed with regular primer. Pic 2 Front view. Pic 3 The next day started blocking regular primer. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />



Register or Log In To remove these advertisements.

06-09-2011, 07:19 PM	#268
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 My son Mark modifing old engie mounts to clear headers. Pic 2 Drivers side was already cut. Pic 3 Both sides done, added angle iron to original mount and then bolted on at bottom of frame lip, needed it this way for header clearance. Pic 4 Close up view. A little grinding and filler, should look good. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:22 PM	#269
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Cab sprayed with regular primer again, with guide coat. Pic 2 Cab ready for final sanding. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:25 PM	#270
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Pic 1 Disassembly of frame for sand blasting. Pic 2 Removing some of the old greasy crap from front crossmember. Attached Images __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:26 PM	#271
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Jimbo's 67 Long bed step side build Well that should keep you picture junkies happy till tomorrow..............Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-09-2011, 07:51 PM	#272
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: Jimbo's 67 Long bed step side build NO! we want more! haha, JK, looks great so far! __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

06-10-2011, 02:33 PM	#274
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: Jimbo's 67 Long bed step side build wow i never thought of myself as a picture junkie until now... i'm a little relieved that you didn't work in St. Louis plant so i won't be tempted to pump you for assembly info haha movin' right along lookin' fine. jim __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.