72 Not sure what to call it yet resto! - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TXPinstriper · 07-23-2012, 11:29 PM

Any updates Chris ?
Posted via Mobile Device

LakeAnna · 07-24-2012, 06:14 AM

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

mcbassin · 07-24-2012, 08:18 AM

Quote:

Originally Posted by LakeAnna

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

Chris
Glad to hear you are still doing good. I think you can go with the new sure fit model. It should work with your compressor. (check with them before you order). There is at least one vender on here that sells the Vintage Air systems. They should be able to save you some bucks.

I'm with you on a crazy work schedule. I haven't touched my project in over a month. It's kinda nice getting away for a while. It works out good because I don't have AC in my shop and it's 100+ everyday here.

Bennett68C10 · 07-26-2012, 05:46 PM

Quote:

Originally Posted by LakeAnna

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

I ordered my vintage air kit from scottshotrods without the compressor. They are a forum member on here. If you look under the Vendor forum they have a thread on vintage air specials. Give them a call they should be able to help you out.
Posted via Mobile Device

mcbassin · 07-26-2012, 09:10 PM

Quote:

Originally Posted by LakeAnna

I must have been on the phone with Justin when you posted here...

Everything is ordered and should be on the way in a week. It's nice to pick up the phone and have great service and all the correct items in one call.

Here is a pic from the other evening.

Very cool looking boat! Looks slow.... Kidding
Haven't had mine out in over a month

Posted via Mobile Device

LakeAnna · 02-05-2013, 07:25 PM

Quote:

Originally Posted by mcbassin

Hey Chris, where you at???
Posted via Mobile Device

,,,, ummm guess.

original-71 · 02-06-2013, 06:40 PM

looking good.

LakeAnna · 02-06-2013, 07:43 PM

Hey Hector, Thanks! How's your truck these days? I just got back to work on mine a week ago. Been trying to finish the fatmat in the cab and doing a little detail stuff until my help comes Saturday.

Here is a cool shot I took yesterday.... can't believe its getting close.

mcbassin · 02-07-2013, 12:56 AM

Quote:

Originally Posted by LakeAnna

,,,, ummm guess.

That looks fast just sitting there

I know you said, but I forgot, what wheels do you have? What size? thanks

BTW, your truck looks great!

LakeAnna · 02-07-2013, 06:14 AM

Quote:

Originally Posted by mcbassin

That looks fast just sitting there

I know you said, but I forgot, what wheels do you have? What size? thanks

BTW, your truck looks great!

20x8.5 and 20x10 Streeters... I will have to give you a buzz on the phone soon.

Quote:

Originally Posted by VA72C10

Truck looks great! Hope to see it in person soon! Now that my job has me traveling and it looks like I'll be adding Orange and Fredericksburg to my territory I'll get to come through your way sometimes for work...

Come on by anytime I live at the lake but the truck is in Louisa at my fathers shop. When are you in the area again?

Quote:

Originally Posted by Maximuz

Beautiful truck!

Thanks! It's a work in progress... this board has been a blessing throughout my build.

Tinkermc · 07-24-2012, 03:14 PM

nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

killer71 · 07-24-2012, 06:54 PM

Almost missed this one...love the build and love the two tone!
Posted via Mobile Device

LakeAnna · 07-27-2012, 03:36 AM

Quote:

Originally Posted by Tinkermc

nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

Help? Yeah I need it for sure... Thanks! I'm not looking forward to the A/C install and wiring.

Quote:

Originally Posted by killer71

Almost missed this one...love the build and love the two tone!
Posted via Mobile Device

Thanks... it's been a couple months since I was able to work on it. Looking forward to getting it done this fall.

**67cheby** · 12-10-2012, 03:42 PM

looking forward to the progress !

mcbassin · 12-10-2012, 05:11 PM

Anything new here?

67ctener · 12-16-2012, 10:10 PM

Your truck looks great
Posted via Mobile Device

LakeAnna · 02-05-2013, 06:59 AM

Okay finally I will have some updated pics on here this evening maybe. Got the fastburn fired and she moves under power.. and stops! Milestone for me to say the least after all of this.

Man! Lots of killer projects going here on the board, could take all month just to catch up.

Bishops Trucks · 02-05-2013, 07:53 AM

Awesome work. Everything looks great! "Shorty" seems fitting for the truck.

LakeAnna · 02-05-2013, 07:59 AM

Quote:

Originally Posted by Bishops Trucks

Awesome work. Everything looks great! "Shorty" seems fitting for the truck.

Broke Shorty... yeah.

Bennett68C10 · 02-05-2013, 09:05 AM

Nice can't wait to see some pics of your progress

502ms · 02-05-2013, 09:06 AM

looking forward to updates

LakeAnna · 02-05-2013, 07:16 PM

Okay here we go with a few pics... everything is still in progress at this point. The Vintage Air is in, American Wire and all the other goodys... Lord is it fun! It's been several months since I had any time or intrest in fooling with it.

Decided last week to get after it again.

Bishops Trucks · 02-06-2013, 07:38 PM

I think we all would like to see a few pics of the ochre and white truck in the background......Please

LakeAnna · 02-06-2013, 07:49 PM

Quote:

Originally Posted by Bishops Trucks

I think we all would like to see a few pics of the ochre and white truck in the background......Please

Yeah that is our Masonry hauler... I have to dig around and see about some pics. I posted a while back in a thread on dump trucks or haulers not sure how to find it again.

Bishops Trucks · 02-06-2013, 07:52 PM

Quote:

Originally Posted by LakeAnna

Yeah that is our Masonry hauler... I have to dig around and see about some pics. I posted a while back in a thread on dump trucks or haulers not sure how to find it again.

Thanks, no big deal. I wanted to see the bed. I have a swb K10 with a rotten bed. I was thinking about building a flatbed with some nice oak rails on it.

07-23-2012, 11:29 PM	#1
TXPinstriper Registered User Join Date: Jan 2012 Location: Santa Fe, Texas Posts: 352	Re: 72 Not sure what to call it yet resto! Any updates Chris ? Posted via Mobile Device __________________ Stocker to Rocker http://67-72chevytrucks.com/vboard/s...=1#post5148380 "THE GRADUATE" http://67-72chevytrucks.com/vboard/s...08#post5763408 JohnnyC http://instagram.com/texpinstriper/

07-24-2012, 06:14 AM	#2
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least. Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine. Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have? Being summer and all I got side tracked on the Lake a few times too. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

02-06-2013, 06:40 PM	#7
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 72 Not sure what to call it yet resto! looking good. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

02-06-2013, 07:43 PM	#8
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Hey Hector, Thanks! How's your truck these days? I just got back to work on mine a week ago. Been trying to finish the fatmat in the cab and doing a little detail stuff until my help comes Saturday. Here is a cool shot I took yesterday.... can't believe its getting close. Attached Images __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

07-24-2012, 03:14 PM	#11
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: 72 Not sure what to call it yet resto! nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

07-24-2012, 06:54 PM	#12
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 72 Not sure what to call it yet resto! Almost missed this one...love the build and love the two tone! Posted via Mobile Device __________________ R.I.P. Killer 71 10/26/07

12-10-2012, 03:42 PM	#14
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 72 Not sure what to call it yet resto! looking forward to the progress ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-10-2012, 05:11 PM	#15
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 72 Not sure what to call it yet resto! Anything new here? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-16-2012, 10:10 PM	#16
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: 72 Not sure what to call it yet resto! Your truck looks great Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

02-05-2013, 06:59 AM	#17
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Okay finally I will have some updated pics on here this evening maybe. Got the fastburn fired and she moves under power.. and stops! Milestone for me to say the least after all of this. Man! Lots of killer projects going here on the board, could take all month just to catch up. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

02-05-2013, 07:53 AM	#18
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: 72 Not sure what to call it yet resto! Awesome work. Everything looks great! "Shorty" seems fitting for the truck. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-05-2013, 09:05 AM	#20
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 72 Not sure what to call it yet resto! Nice can't wait to see some pics of your progress __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-05-2013, 09:06 AM	#21
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 72 Not sure what to call it yet resto! looking forward to updates __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-05-2013, 07:16 PM	#22
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Okay here we go with a few pics... everything is still in progress at this point. The Vintage Air is in, American Wire and all the other goodys... Lord is it fun! It's been several months since I had any time or intrest in fooling with it. Decided last week to get after it again. Attached Images __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

02-06-2013, 07:38 PM	#23
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: 72 Not sure what to call it yet resto! I think we all would like to see a few pics of the ochre and white truck in the background......Please __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.