** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 118 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 02-17-2012, 10:35 PM

OK - OK, I got one night of work in and hung the receiver hitch I built. Then I started to hang the rear bumper, but I still have to design and build mounting brackets.

I think someone must have watered my wiring loom.

I have another 6 liter Denali engine and a 2002 Silverado truck to part out.

......and yes I am still building a bungalow.

**Dieselwrencher** · 02-17-2012, 10:52 PM

Are your wiring connectors all corroded or something? nice job on getting the hitch installed. Man, you come up with a lot of those trucks!

pickup67man · 02-17-2012, 11:03 PM

Your truck looks so nice, too bad someone threw up all that spaghetti on your floor.

I don't know where you get your energy. I do home projects OR car projects. If I did both I wouldn't sleep. Luckily I'm almost done with one and can start on the other

jbclassix · 02-18-2012, 12:13 AM

None of his right handed hammers have come back from calibration yet so the remodel is going slow.

tomsprojects · 02-18-2012, 12:38 AM

I could use one of those heater ac units if you have a extra one kicking around sence mine is all smashed up.
Posted via Mobile Device

Gokart Mozart · 02-18-2012, 07:05 AM

Quote:

Originally Posted by Dieselwrencher

Are your wiring connectors all corroded or something?

Nah, someone watered them and they grew 6 feet and 10 branches.

drewskiren · 02-18-2012, 09:03 PM

This was at 9 am this morning, I'm just now getting down and I am whipped. We did get tar paper and shingles on most of it though!

VA72C10 · 02-18-2012, 10:08 PM

Looks like some excellent craftsmanship! Just like the truck!

pickup67man · 02-18-2012, 10:34 PM

I have very recent memories of being on the roof. Not something I want to do very often. I'm not afraid of the height, but the angle kills my legs. I spent one weekend sheathing my roof and the next installing the shingles. I have a 9-12 pitch.

notsolo · 02-19-2012, 08:38 AM

Quote:

Originally Posted by drewskiren

This was at 9 am this morning, I'm just now getting down and I am whipped. We did get tar paper and shingles on most of it though!

Hey Drew ...looking good... have you used..... ..Titanium roof paper UDL30 www.interwrap.com. is about $125-$145 a 1000 sq ft roll...but is equal to 10 rolls of felt. Very strong. I had it on the roof for a least a month before getting it covered with shingle.

classicchev · 02-19-2012, 02:00 PM

Quote:

Originally Posted by notsolo

Hey Drew ...looking good... have you used..... ..Titanium roof paper UDL30 www.interwrap.com. is about $125-$145 a 1000 sq ft roll...but is equal to 10 rolls of felt. Very strong. I had it on the roof for a least a month before getting it covered with shingle.

WOW, That would be slippery I wonder how those little "plastic" nubs keep you from slipping.. bad enough on tarpaper on the slope but go and put a product like Tyvec or Typar on that slope and that would make a quick ride down.

I see a bunch of Canadian cities in there ads, so Im assuming it must be good, or our Workmens Compensation Board would squashed it real quick.

Never used it, but I will look into it for the next job

notsolo · 02-19-2012, 02:48 PM

Quote:

Originally Posted by classicchev

WOW, That would be slippery I wonder how those little "plastic" nubs keep you from slipping.. bad enough on tarpaper on the slope but go and put a product like Tyvec or Typar on that slope and that would make a quick ride down.

I see a bunch of Canadian cities in there ads, so Im assuming it must be good, or our Workmens Compensation Board would squashed it real quick.

Never used it, but I will look into it for the next job

It has a web embedded in, any frost or ice would be slippery. IMO 10x better than tar paper.

jbclassix · 02-19-2012, 02:53 PM

Drew, I love the roof trusses! You have some great skills!

**68 Four on the Floor** · 02-20-2012, 09:12 PM

Quote:

Originally Posted by jbclassix

Drew, I love the roof trusses! You have some great skills!

I agree! Trusses look awesome. Any chance youll be wanting to get rid of the Denali engine cover? I cant find one in town for nothing

scotts72heavyhalf · 02-21-2012, 09:52 PM

Any updates?

drewskiren · 02-21-2012, 11:38 PM

Quote:

Originally Posted by scotts72heavyhalf

Any updates?

Yes, I removed 1/3 of my roof today on the house, I'll have a picture in the morning.

Oh, you meant truck - didn't you. Sorry. I showed it to someone today - does that count?

Thanks for asking. I did find an upholstery shop to do the headliner.

scotts72heavyhalf · 02-21-2012, 11:41 PM

Ya that can count for now, but tomorrow pics

drewskiren · 02-22-2012, 12:08 AM

Quote:

Originally Posted by scotts72heavyhalf

Ya that can count for now, but tomorrow pics

Yes Sir!

scotts72heavyhalf · 02-22-2012, 12:21 AM

philliesmvp · 02-22-2012, 12:28 AM

Are you selling the 6.0 engine?

scotts72heavyhalf · 02-22-2012, 01:04 AM

He Drew this is scotts72heavyhalfs son Wyatt, I have been following this build just about from the beginning and I am AMAZED

. I am just blown away at the work you do. I check this build at 6:30 am every weekday before school to see what is going on, and every weekend. Let me just say WOW, I think you have a true skill. KEEP UP THE AMAZING WORK.
Wyatt

drewskiren · 02-22-2012, 09:28 PM

Quote:

Originally Posted by philliesmvp

Are you selling the 6.0 engine?

Yes, it is on ebay right now. Selling everything else on the truck too.

drewskiren · 02-22-2012, 09:42 PM

Quote:

Originally Posted by scotts72heavyhalf

He Drew this is scotts72heavyhalfs son Wyatt, I have been following this build just about from the beginning and I am AMAZED

. I am just blown away at the work you do. I check this build at 6:30 am every weekday before school to see what is going on, and every weekend. Let me just say WOW, I think you have a true skill. KEEP UP THE AMAZING WORK.
Wyatt

Wyatt-

Thanks for your heartfelt encouragement, If you treat everyone in life with this attitude you will go far!

scotts72heavyhalf · 02-22-2012, 11:31 PM

Thanks Drew

drewskiren · 02-24-2012, 01:20 AM

Our new dogtrot plan.

Or

The bulldozer got away from me.

I can hardly type tonight, I ran a jackhammer all day on the old foyer brick floor.

02-17-2012, 10:35 PM	#2926
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. OK - OK, I got one night of work in and hung the receiver hitch I built. Then I started to hang the rear bumper, but I still have to design and build mounting brackets. I think someone must have watered my wiring loom. I have another 6 liter Denali engine and a 2002 Silverado truck to part out. ......and yes I am still building a bungalow. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

02-17-2012, 10:52 PM	#2927
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Are your wiring connectors all corroded or something? nice job on getting the hitch installed. Man, you come up with a lot of those trucks! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-17-2012, 11:03 PM	#2928
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Your truck looks so nice, too bad someone threw up all that spaghetti on your floor. I don't know where you get your energy. I do home projects OR car projects. If I did both I wouldn't sleep. Luckily I'm almost done with one and can start on the other __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

02-18-2012, 12:13 AM	#2929
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. None of his right handed hammers have come back from calibration yet so the remodel is going slow. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

02-18-2012, 12:38 AM	#2930
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I could use one of those heater ac units if you have a extra one kicking around sence mine is all smashed up. Posted via Mobile Device

02-18-2012, 09:03 PM	#2932
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. This was at 9 am this morning, I'm just now getting down and I am whipped. We did get tar paper and shingles on most of it though! Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

02-18-2012, 10:08 PM	#2933
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks like some excellent craftsmanship! Just like the truck! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-18-2012, 10:34 PM	#2934
pickup67man Registered User Join Date: Jun 2009 Location: Puyallup, WA Posts: 337	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I have very recent memories of being on the roof. Not something I want to do very often. I'm not afraid of the height, but the angle kills my legs. I spent one weekend sheathing my roof and the next installing the shingles. I have a 9-12 pitch. __________________ Travis 2005 K2500 Duramax (hauls the junk home) 1967 Chev C10 (hauls a$$) 1970 Suburban (Yukon XL 4 door) 1968 GMC 3/4 ton (sheetmetal only, chassis gone) 2005 Malibu (wife's car, still a Chevy) Project Family Hauler New Home for Chevys (Moved in and working)

02-19-2012, 02:53 PM	#2938
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, I love the roof trusses! You have some great skills! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

02-21-2012, 09:52 PM	#2940
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Any updates? __________________ Scotts72C10

02-21-2012, 11:41 PM	#2942
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Ya that can count for now, but tomorrow pics __________________ Scotts72C10

02-22-2012, 12:21 AM	#2944
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. __________________ Scotts72C10

02-22-2012, 12:28 AM	#2945
philliesmvp Registered User Join Date: Feb 2011 Location: Hendersonville, TN Posts: 18	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Are you selling the 6.0 engine?

02-22-2012, 01:04 AM	#2946
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. He Drew this is scotts72heavyhalfs son Wyatt, I have been following this build just about from the beginning and I am AMAZED . I am just blown away at the work you do. I check this build at 6:30 am every weekday before school to see what is going on, and every weekend. Let me just say WOW, I think you have a true skill. KEEP UP THE AMAZING WORK. Wyatt __________________ Scotts72C10

02-22-2012, 11:31 PM	#2949
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Thanks Drew __________________ Scotts72C10



Register or Log In To remove these advertisements.

02-24-2012, 01:20 AM	#2950
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Our new dogtrot plan. Or The bulldozer got away from me. I can hardly type tonight, I ran a jackhammer all day on the old foyer brick floor. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.