Camaro Caliper Brackets - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Crash'd Artwerks · 02-04-2015, 01:02 AM

Quote:

Originally Posted by Captainfab

The only rotor that can be used with these brackets without modification are the ones they are designed for.

The '93-'97 F-body rotors have a 5 x 4.65" wheel stud pattern, are smaller in diameter and a different height.

I have started on a different set of brackets for the trucks using the 5 x 4.75" wheel stud pattern, but I don't know when I will have time to finish them up.

Gotcha. I guess I'll just have to buy a pair of Impala rotors and re-drill the 4.75 pattern in between the 5" pattern.

dan468 · 03-06-2015, 03:37 PM

How do these calipers adjust the parking brake for pad wear?

**Captainfab** · 03-07-2015, 01:03 AM

I just assumed they had some sort of internal ratcheting mechanism. Did you use new/rebuilt calipers or used?

Quote:

Originally Posted by dan468

How do these calipers adjust the parking brake for pad wear?

dan468 · 03-07-2015, 01:05 AM

They are rebuilt. The design does not have a ratchet. The Camero did though, have a ratchet built into the handle. But I'm unsure if this was to adjust the parking brake or simply keep the cables tight.

dan468 · 04-09-2015, 11:32 AM

Has anyone successfully tested this on a running truck? How's the P brake hold?

jadedbird · 05-01-2015, 05:23 PM

Posted via Mobile Device

jadedbird · 05-01-2015, 05:24 PM

Do you make a kit to utilize a 98-02 camaro ls1 brake it? I have a 6 lug 64
Posted via Mobile Device

**Captainfab** · 05-02-2015, 12:08 AM

No I do not. I just have the two 6 lug rear disc brackets.

Quote:

Originally Posted by jadedbird

Do you make a kit to utilize a 98-02 camaro ls1 brake it? I have a 6 lug 64
Posted via Mobile Device

ls1nova71 · 06-25-2015, 10:57 PM

Not sure if this is the right place to ask this question, but what is everybody using these rear brakes using for a proportioning valve? I would really like to avoid using an adjustable one if at all possible.

**Captainfab** · 06-25-2015, 11:24 PM

I do not know if there are any differences in the brake bias with the aftermarket fixed disc/disc proportioning valves.

jeromio · 06-29-2015, 08:01 PM

I had interference with the e-brake lever arm on the caliper and the bottom of the back of the trailing arm. SO I installed these facing forward. But now I am putting airbags in the rear and the e-brake cable will interfere with the bag.

The main problem is the big rubber bushing that's on the e-brake lever arm. I don't know what that is for - harmonic dampening?

Any suggestions?

**Captainfab** · 06-29-2015, 11:47 PM

I believe the 'rubber bushing' you are referring to can be removed. Do you have any pics of your installation. I just can nit picture how the e-brake lever could make contact with the trailing arm. I have been looking at the pics in post #184 and post #220.

Quote:

Originally Posted by jeromio

I had interference with the e-brake lever arm on the caliper and the bottom of the back of the trailing arm. SO I installed these facing forward. But now I am putting airbags in the rear and the e-brake cable will interfere with the bag.

The main problem is the big rubber bushing that's on the e-brake lever arm. I don't know what that is for - harmonic dampening?

Any suggestions?

Tom · 07-19-2015, 09:29 PM

Quote:

Originally Posted by Captainfab

I do not yet make any rear disc brackets for the '88-'98 trucks. I keep hoping to find the time to work on those, but with working 70-80 hrs a week every week, time is scarce. Does your truck have the 8.5" 10 bolt or the 9.5" 14 bolt?

The time has finally come and I check back to make sure everything is good and see this. So I re-read the thread and found you already said they won't work many pages ago. Dangit!! I have the 10 bolt. When I read 10 and 12 bolts I just assumed my 98's 10 bolt was the same.

**Captainfab** · 07-19-2015, 11:36 PM

Sorry but I still don't have anything for the '88-'98 10 bolts, I'm still working 80 hrs a week every week. There are actually 2 versions of the 8.5" 10 bolts in the '88-'98 trucks which have different backing plate flanges both of which are different from the '87 and earlier 10 bolts. I assume one is a standard duty and the other is a heavy duty. Additionally the '88-'98's have a wider brake offset. I am still hoping to get to these one day.

Quote:

Originally Posted by Tom

The time has finally come and I check back to make sure everything is good and see this. So I re-read the thread and found you already said they won't work many pages ago. Dangit!! I have the 10 bolt. When I read 10 and 12 bolts I just assumed my 98's 10 bolt was the same.

SouthernYankee · 08-03-2015, 04:54 PM

hello there! Please tell me you are still making these?!

**Captainfab** · 08-04-2015, 12:45 AM

Yes all of my products are still available including these rear disc brackets. would you like them in bare steel or satin black powder coat?

Quote:

Originally Posted by SouthernYankee

hello there! Please tell me you are still making these?!

SouthernYankee · 08-04-2015, 03:58 PM

Quote:

Originally Posted by Captainfab

Yes all of my products are still available including these rear disc brackets. would you like them in bare steel or satin black powder coat?

PM'd. Thanks!

**Captainfab** · 08-05-2015, 12:05 AM

PM replied to

claytonisbob · 08-10-2015, 04:15 PM

I PM'd you about getting some bare steel camaro caliper/impala rotor brackets.

**Captainfab** · 08-10-2015, 11:30 PM

I replied to your PM from early this morning. I only have time to log onto the forum once a day, in the evenings after I get home.

chevy_mike · 11-12-2015, 01:43 PM

Sent ya a PM for a set of brackets.

**Captainfab** · 11-13-2015, 01:12 AM

PM replied to

Quote:

Originally Posted by chevy_mike

Sent ya a PM for a set of brackets.

crakarjax · 01-14-2016, 01:07 PM

After reading through this entire thread it's not clear -- has anyone found calipers that include the bracket and e-brake setup? Rock Auto has excellent deals but not all of their products have pics, so it's hard to say whether this stuff is included.

rocknss · 01-15-2016, 08:32 AM

Quote:

Originally Posted by crakarjax

After reading through this entire thread it's not clear -- has anyone found calipers that include the bracket and e-brake setup? Rock Auto has excellent deals but not all of their products have pics, so it's hard to say whether this stuff is included.

I picked up mine from an auto salvage yard and made sure they had the e-brake setup. I cleaned them up and are working great!
Posted via Mobile Device

crakarjax · 01-15-2016, 03:32 PM

Quote:

Originally Posted by rocknss

I picked up mine from an auto salvage yard and made sure they had the e-brake setup. I cleaned them up and are working great!
Posted via Mobile Device

I'd rather find a new or reman set, never know what you're going to get with used calipers! On the other hand there could be useful connectors to be had along with the salvaged calipers...

03-06-2015, 03:37 PM	#277
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Camaro Caliper Brackets How do these calipers adjust the parking brake for pad wear? __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

03-07-2015, 01:05 AM	#279
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Camaro Caliper Brackets They are rebuilt. The design does not have a ratchet. The Camero did though, have a ratchet built into the handle. But I'm unsure if this was to adjust the parking brake or simply keep the cables tight. __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

04-09-2015, 11:32 AM	#280
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Camaro Caliper Brackets Has anyone successfully tested this on a running truck? How's the P brake hold? __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

05-01-2015, 05:23 PM	#281
jadedbird Registered User Join Date: Apr 2015 Location: So Indiana Posts: 139	Re: Camaro Caliper Brackets Posted via Mobile Device

05-01-2015, 05:24 PM	#282
jadedbird Registered User Join Date: Apr 2015 Location: So Indiana Posts: 139	Re: Camaro Caliper Brackets Do you make a kit to utilize a 98-02 camaro ls1 brake it? I have a 6 lug 64 Posted via Mobile Device

06-25-2015, 10:57 PM	#284
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Camaro Caliper Brackets Not sure if this is the right place to ask this question, but what is everybody using these rear brakes using for a proportioning valve? I would really like to avoid using an adjustable one if at all possible. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

06-25-2015, 11:24 PM	#285
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets I do not know if there are any differences in the brake bias with the aftermarket fixed disc/disc proportioning valves. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-29-2015, 08:01 PM	#286
jeromio Registered User Join Date: Oct 2009 Location: Durham, NC Posts: 33	Re: Camaro Caliper Brackets I had interference with the e-brake lever arm on the caliper and the bottom of the back of the trailing arm. SO I installed these facing forward. But now I am putting airbags in the rear and the e-brake cable will interfere with the bag. The main problem is the big rubber bushing that's on the e-brake lever arm. I don't know what that is for - harmonic dampening? Any suggestions?

08-03-2015, 04:54 PM	#290
SouthernYankee Registered User Join Date: Mar 2012 Location: Huntersville, NC Posts: 4	Re: Camaro Caliper Brackets hello there! Please tell me you are still making these?!

08-05-2015, 12:05 AM	#293
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets PM replied to __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-10-2015, 04:15 PM	#294
claytonisbob Registered User Join Date: Dec 2010 Location: Dallas, TX Posts: 32	Re: Camaro Caliper Brackets I PM'd you about getting some bare steel camaro caliper/impala rotor brackets.

08-10-2015, 11:30 PM	#295
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets I replied to your PM from early this morning. I only have time to log onto the forum once a day, in the evenings after I get home. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-12-2015, 01:43 PM	#296
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Camaro Caliper Brackets Sent ya a PM for a set of brackets. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-14-2016, 01:07 PM	#298
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: Camaro Caliper Brackets After reading through this entire thread it's not clear -- has anyone found calipers that include the bracket and e-brake setup? Rock Auto has excellent deals but not all of their products have pics, so it's hard to say whether this stuff is included. __________________ 1968 LWB C20 / AC / Wood Bed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.