1958 Apache 38 Dually Dump Project - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-18-2013, 10:21 PM

It's looking very nice! But I have to agree, a 6 cylinder would make that truck so much more fun.

RockTonka · 02-19-2013, 01:43 AM

Quote:

Originally Posted by Dub_X

Well, you're about one step ahead of me at this point

I got my chassis rolling last night. Next step is engine, trans, and transfer case.

We're just pacing each other...

Quote:

Originally Posted by _Ogre

looks sooo simple here

i don't understand what's taking so long

I know, all thats left is to finish it up!

Quote:

Originally Posted by jbclassix

Did you get your 205/4500 already assembled, or did you bolt them together? The reason I ask is I wanted to know if you have pictures of the coupler.

We had a local shop build it out, but I was in there alot. I don't have any pics of the coupler, 27 to 31 spline (if I remember right

), but we did have to chase a new down...wasn't with the Dodge 205 I picked up.

Quote:

Originally Posted by skymangs

Awesome build. Subscribed!

Cool, thanks!!

Quote:

Originally Posted by Dieselwrencher

It's looking very nice! But I have to agree, a 6 cylinder would make that truck so much more fun.

Thanks Dw, If I was more familiar with the 6s, I might have gone that way...no teaching old dogs new tricks

RockTonka · 02-19-2013, 01:58 AM

Reworked the alt mount...

1985-GMC · 02-19-2013, 02:44 AM

Looks sweet!

If that was a dodge 4wd Nv4500 then it was 29 spline.
Posted via Mobile Device

Dub_X · 02-19-2013, 09:47 AM

Looks damn good
Posted via Mobile Device

jbclassix · 02-19-2013, 11:44 AM

[QUOTE=RockTonka;5898220]We had a local shop build it out, but I was in there alot. I don't have any pics of the coupler, 27 to 31 spline (if I remember right), but we did have to chase a new down...wasn't with the Dodge 205 I picked up.
[QUOTE]

Cool man, thanks! I am trying to mate a 10spl 205 to a 32 spline chevy using the Dodge adapter like you have. Now I know for a fact that there is a coupler available!

Luther Grimace · 03-03-2013, 05:41 PM

I just had to say this again. That frame looks sick with those wheels.
Posted via Mobile Device

skymangs · 03-03-2013, 10:33 PM

Damn that's Purdy! Great project!

Pop's C-10 · 03-04-2013, 01:16 PM

love this build

RockTonka · 03-05-2013, 12:19 AM

[quote=1985-GMC;5898277]Looks sweet!

Thanks!!

Quote:

Originally Posted by Dub_X

Looks damn good
Posted via Mobile Device

Thanks, it's getting there

Quote:

Originally Posted by Luther Grimace

I just had to say this again. That frame looks sick with those wheels.
Posted via Mobile Device

Thanks Luther, we kinda like em too...

Quote:

Originally Posted by skymangs

Damn that's Purdy! Great project!

Thanks skymangs...it's going slow, but we're enjoying it!

Quote:

Originally Posted by Pop's C-10

love this build

Thanks Pop's, we appreciate that!!

Maxxd07 · 03-05-2013, 01:43 AM

Just love this thing and its nice to see things going good again!

Cyrus · 03-15-2013, 03:38 PM

Subscribed!

This truck is right up my alley. Great job!
Posted via Mobile Device

Dinos63 · 03-17-2013, 02:26 AM

sooo nice!

RockTonka · 03-18-2013, 12:55 AM

Quote:

Originally Posted by Maxxd07

Just love this thing and its nice to see things going good again!

Thanks Maxx, we glad to be back on it hot and heavy!

Quote:

Originally Posted by Cyrus

Subscribed!

This truck is right up my alley. Great job!
Posted via Mobile Device

Cool Cyrus! Glad to have ya along for the ride!!

Quote:

Originally Posted by Dinos63

sooo nice!

What's up Dino...thanks for checking in on us!!

We've been sidetracked a couple weeks working on the shop, but did get a tranny crossmember built and in...got to be able to move things around easy...projects are starting to stack up on us

MrBeast · 03-18-2013, 12:57 AM

HA HA! new shop and you are already out of room!

(isn't that always the way it works?)

RockTonka · 03-18-2013, 01:10 AM

Not quite out of room yet, but need to keep it somewhat organized...

1985-GMC · 03-18-2013, 02:31 AM

Dude I want your shop so bad! I can dream right? haha

**Dieselwrencher** · 03-18-2013, 02:52 PM

You'll be filling up the storage building shortly too! I love your new shop guys!

6BT 56 · 03-18-2013, 10:01 PM

Quote:

Originally Posted by RockTonka

Not quite out of room yet, but need to keep it somewhat organized...

You guys have it all wrong. That 58 cab is to be on the lift and the new frame under it. If you keep trying to mount that 66 complete truck on your new frame you will never get done !!!!

How much longer before the cab and frame get married ?

And did you mini tub the burb? Looks like big boots on the back.

RockTonka · 03-18-2013, 11:26 PM

Quote:

Originally Posted by 1985-GMC

Dude I want your shop so bad! I can dream right? haha

I still pinch myself every now and then

Quote:

Originally Posted by Dieselwrencher

You'll be filling up the storage building shortly too! I love your new shop guys!

We're working on it

Thanks!

Quote:

Originally Posted by 6BT 56

You guys have it all wrong. That 58 cab is to be on the lift and the new frame under it. If you keep trying to mount that 66 complete truck on your new frame you will never get done !!!!

How much longer before the cab and frame get married ?

And did you mini tub the burb? Looks like big boots on the back.

I'm anxious to get the body swapped over, probably be a few weeks at least though. We want to work out the body mounts on my boys truck first (why its on the lift).

Yep, mini tub on the burb along with a narrowed 60, discs, 3.54/powerlok, 29x15.5x15 Hoosiers

**Dieselwrencher** · 03-18-2013, 11:35 PM

Oh yes, I forgot to add that your burb looks tits!

RockTonka · 04-19-2013, 12:33 AM

We've been struggling with exhaust clearance issues with the clutch slave, PTO, and even engine to frame (modified mounts to lower engine in chassis). Stock exhaust manifolds still fit (barely), but are my least favorite option.
We brought a set of fenderwell headers in to try, but a lot of inner fender would have to disappear to let these work...but we're kinda digging the look!

C@rnut001 · 04-19-2013, 12:37 AM

Man, that is looking great and I dig the look of the fenderwell headers, they just might be the way to go...LOL...anyway, thanks for sharing your updates and good luck getting more done on your truck here. Keep it coming, we love reading about your builds!

Dinos63 · 04-19-2013, 06:05 PM

Whoa!! Very cool..... And your shop is nice!

rambler · 04-19-2013, 06:40 PM

awesome build, I read the first page, then fast forwarded to the last.. wow..

02-18-2013, 10:21 PM	#276
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1958 Apache 38 Dually Dump Project It's looking very nice! But I have to agree, a 6 cylinder would make that truck so much more fun. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-19-2013, 01:58 AM	#278
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Reworked the alt mount... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

02-19-2013, 02:44 AM	#279
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 1958 Apache 38 Dually Dump Project Looks sweet! If that was a dodge 4wd Nv4500 then it was 29 spline. Posted via Mobile Device __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

02-19-2013, 09:47 AM	#280
Dub_X Professional Crow Bar Tosser Join Date: Dec 2010 Location: Fairview, Missouri [Joplin Area] Posts: 872	Re: 1958 Apache 38 Dually Dump Project Looks damn good Posted via Mobile Device __________________ Will My Beast "Big Nasty": '92 GMC Sierra K1500 Ext. Cab L31 Swap 4x4 Conversion: 2" Body Lift, 3" Skyjacker Suspension Lift, 9.5" 14-Bolt G80 Rear, 3:73 Gears, 350cid L31 Vortec 5700, 4L60-E Overdrive Automatic My Dad's Beast: CUSTOM '97 Chevrolet Silverado K3500 4-Door Mega Cab Project: 10.5" 14-Bolt G80 Rear, 4:10 Gears, 5.7L 350cid SBC Vortec, 4L80-E Overdrive Automatic "I'd rather PUSH my Chevy than DRIVE your Ford!"

02-19-2013, 11:44 AM	#281
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1958 Apache 38 Dually Dump Project [QUOTE=RockTonka;5898220]We had a local shop build it out, but I was in there alot. I don't have any pics of the coupler, 27 to 31 spline (if I remember right), but we did have to chase a new down...wasn't with the Dodge 205 I picked up. [QUOTE] Cool man, thanks! I am trying to mate a 10spl 205 to a 32 spline chevy using the Dodge adapter like you have. Now I know for a fact that there is a coupler available! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-03-2013, 05:41 PM	#282
Luther Grimace Registered User Join Date: Jun 2012 Location: Madison, AL Posts: 380	Re: 1958 Apache 38 Dually Dump Project I just had to say this again. That frame looks sick with those wheels. Posted via Mobile Device __________________ 1955.2 Chevy 3100, 6bt, Getrag G360 5-speed, NP205, Dana 60/70 - http://67-72chevytrucks.com/vboard/s...d.php?t=536540 1992 Chevy K1500 Silverado ECSB 1965 "Crewcab" Chevelle 300 Deluxe - soon to be LBZ Duramax/4L85E powered

03-03-2013, 10:33 PM	#283
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: 1958 Apache 38 Dually Dump Project Damn that's Purdy! Great project! __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

03-04-2013, 01:16 PM	#284
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: 1958 Apache 38 Dually Dump Project love this build __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

03-05-2013, 01:43 AM	#286
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: 1958 Apache 38 Dually Dump Project Just love this thing and its nice to see things going good again! __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

03-15-2013, 03:38 PM	#287
Cyrus Registered User Join Date: Aug 2009 Location: Des Moines, IA Posts: 44	Re: 1958 Apache 38 Dually Dump Project Subscribed! This truck is right up my alley. Great job! Posted via Mobile Device __________________ My build thread (so far):http://67-72chevytrucks.com/vboard/s...d.php?t=360258 1958 GMC PM152 270 I6 4-speed 1994 GMC Sonoma 2WD TBI 5.0 700R4

03-17-2013, 02:26 AM	#288
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1958 Apache 38 Dually Dump Project sooo nice! __________________ CHEVY ONLY... Nothin Else !

03-18-2013, 12:57 AM	#290
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: 1958 Apache 38 Dually Dump Project HA HA! new shop and you are already out of room! (isn't that always the way it works?) __________________ "He used to be a pretty nice feller, now he's a welder!"

03-18-2013, 01:10 AM	#291
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project Not quite out of room yet, but need to keep it somewhat organized... __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

03-18-2013, 02:31 AM	#292
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 1958 Apache 38 Dually Dump Project Dude I want your shop so bad! I can dream right? haha __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

03-18-2013, 02:52 PM	#293
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1958 Apache 38 Dually Dump Project You'll be filling up the storage building shortly too! I love your new shop guys! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

03-18-2013, 11:35 PM	#296
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1958 Apache 38 Dually Dump Project Oh yes, I forgot to add that your burb looks tits! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-19-2013, 12:33 AM	#297
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: 1958 Apache 38 Dually Dump Project We've been struggling with exhaust clearance issues with the clutch slave, PTO, and even engine to frame (modified mounts to lower engine in chassis). Stock exhaust manifolds still fit (barely), but are my least favorite option. We brought a set of fenderwell headers in to try, but a lot of inner fender would have to disappear to let these work...but we're kinda digging the look! Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

04-19-2013, 12:37 AM	#298
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: 1958 Apache 38 Dually Dump Project Man, that is looking great and I dig the look of the fenderwell headers, they just might be the way to go...LOL...anyway, thanks for sharing your updates and good luck getting more done on your truck here. Keep it coming, we love reading about your builds! __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

04-19-2013, 06:05 PM	#299
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1958 Apache 38 Dually Dump Project Whoa!! Very cool..... And your shop is nice! __________________ CHEVY ONLY... Nothin Else !

04-19-2013, 06:40 PM	#300
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: 1958 Apache 38 Dually Dump Project awesome build, I read the first page, then fast forwarded to the last.. wow.. __________________ No matter where you are..... There you are... Buckaroo Banzi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.