72 Not sure what to call it yet resto! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TXPinstriper · 07-23-2012, 11:29 PM

Any updates Chris ?
Posted via Mobile Device

LakeAnna · 07-24-2012, 06:14 AM

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

mcbassin · 07-24-2012, 08:18 AM

Quote:

Originally Posted by LakeAnna

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

Chris
Glad to hear you are still doing good. I think you can go with the new sure fit model. It should work with your compressor. (check with them before you order). There is at least one vender on here that sells the Vintage Air systems. They should be able to save you some bucks.

I'm with you on a crazy work schedule. I haven't touched my project in over a month. It's kinda nice getting away for a while. It works out good because I don't have AC in my shop and it's 100+ everyday here.

Tinkermc · 07-24-2012, 03:14 PM

nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

killer71 · 07-24-2012, 06:54 PM

Almost missed this one...love the build and love the two tone!
Posted via Mobile Device

Bennett68C10 · 07-26-2012, 05:46 PM

Quote:

Originally Posted by LakeAnna

Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least.
Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine.
Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have?

Being summer and all I got side tracked on the Lake a few times too.

I ordered my vintage air kit from scottshotrods without the compressor. They are a forum member on here. If you look under the Vendor forum they have a thread on vintage air specials. Give them a call they should be able to help you out.
Posted via Mobile Device

mcbassin · 07-26-2012, 09:10 PM

Quote:

Originally Posted by LakeAnna

I must have been on the phone with Justin when you posted here...

Everything is ordered and should be on the way in a week. It's nice to pick up the phone and have great service and all the correct items in one call.

Here is a pic from the other evening.

Very cool looking boat! Looks slow.... Kidding
Haven't had mine out in over a month

Posted via Mobile Device

LakeAnna · 07-27-2012, 03:36 AM

Quote:

Originally Posted by Tinkermc

nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

Help? Yeah I need it for sure... Thanks! I'm not looking forward to the A/C install and wiring.

Quote:

Originally Posted by killer71

Almost missed this one...love the build and love the two tone!
Posted via Mobile Device

Thanks... it's been a couple months since I was able to work on it. Looking forward to getting it done this fall.

LakeAnna · 07-27-2012, 03:40 AM

Quote:

Originally Posted by mcbassin

Very cool looking boat! Looks slow.... Kidding
Haven't had mine out in over a month

Posted via Mobile Device

Mike you know an Allison is not slow...

It's just like you said here... Today the shop was 85 with the fans blowing HOT air. What are you up to?? Golfing is hot too this time of year... What the fishin aint good this time of year??

mcbassin · 07-27-2012, 08:45 AM

Quote:

Originally Posted by LakeAnna

Mike you know an Allison is not slow...

It's just like you said here... Today the shop was 85 with the fans blowing HOT air. What are you up to?? Golfing is hot too this time of year... What the fishin aint good this time of year??

Yeah I know Allison is as fast as they come.

No, I have been working more hours than I ever have. Trying to stock on some cash so when it cools down I can get back on my project.
Historically, I don't work on it at all during July and August. Where you have 85, we have 105. With no A/C in my shop it's not an option.
I do still play golf with the boy on weekend evenings when it "cools" down.
Fishing is super slow this time of year, all the lakes are low again from lack of rain too.

Looking forward to updates on yours anyway. Keep hammering

TXPinstriper · 07-29-2012, 12:18 PM

Chris the Vintage air is not bad to install I have the Gen IV if you have any questions let me know....
Posted via Mobile Device

original-71 · 09-27-2012, 03:09 PM

any updates ?

LakeAnna · 09-28-2012, 04:31 AM

Quote:

Originally Posted by original-71

any updates ?

Nothing much to speak of as of late... I have the Vintage Air in!!!

I will get back to work on it as the weather gets colder here and work slows.

Plus the boat won't be such a distraction.

truckzilla · 12-10-2012, 01:17 PM

Subcribed!

**67cheby** · 12-10-2012, 03:42 PM

looking forward to the progress !

mcbassin · 12-10-2012, 05:11 PM

Anything new here?

67ctener · 12-16-2012, 10:10 PM

Your truck looks great
Posted via Mobile Device

LakeAnna · 02-05-2013, 06:59 AM

Okay finally I will have some updated pics on here this evening maybe. Got the fastburn fired and she moves under power.. and stops! Milestone for me to say the least after all of this.

Man! Lots of killer projects going here on the board, could take all month just to catch up.

Bishops Trucks · 02-05-2013, 07:53 AM

Awesome work. Everything looks great! "Shorty" seems fitting for the truck.

LakeAnna · 02-05-2013, 07:59 AM

Quote:

Originally Posted by Bishops Trucks

Awesome work. Everything looks great! "Shorty" seems fitting for the truck.

Broke Shorty... yeah.

Bennett68C10 · 02-05-2013, 09:05 AM

Nice can't wait to see some pics of your progress

502ms · 02-05-2013, 09:06 AM

looking forward to updates

LakeAnna · 02-05-2013, 07:16 PM

Okay here we go with a few pics... everything is still in progress at this point. The Vintage Air is in, American Wire and all the other goodys... Lord is it fun! It's been several months since I had any time or intrest in fooling with it.

Decided last week to get after it again.

LakeAnna · 02-05-2013, 07:25 PM

Quote:

Originally Posted by mcbassin

Hey Chris, where you at???
Posted via Mobile Device

,,,, ummm guess.

original-71 · 02-06-2013, 06:40 PM

looking good.

07-23-2012, 11:29 PM	#276
TXPinstriper Registered User Join Date: Jan 2012 Location: Santa Fe, Texas Posts: 352	Re: 72 Not sure what to call it yet resto! Any updates Chris ? Posted via Mobile Device __________________ Stocker to Rocker http://67-72chevytrucks.com/vboard/s...=1#post5148380 "THE GRADUATE" http://67-72chevytrucks.com/vboard/s...08#post5763408 JohnnyC http://instagram.com/texpinstriper/

07-24-2012, 06:14 AM	#277
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Guys I have been working on a brick job from HELL since mid May. I am thankful to have the work but omg what a pita it has been. The truck has been just sitting in the shop for the last two months. I saw it this past weekend for the first time in over a month... I was able to get the glass both front and the rear slider in at least. Next up I need to order the Vintage Air for it. I already have the compressor that came with the engine so I need to order whatever kit they have less that. It's a GM (Delco) 88964849 that comes with the Fastburn crate engine. Should I just call Vintage direct or is there someone here that has already ordered a kit with the same situation I have? Being summer and all I got side tracked on the Lake a few times too. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

07-24-2012, 03:14 PM	#279
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: 72 Not sure what to call it yet resto! nice lookin work, if you find you would like some help of any kind wiring or whatever I could come help.It's not far away.

07-24-2012, 06:54 PM	#280
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 72 Not sure what to call it yet resto! Almost missed this one...love the build and love the two tone! Posted via Mobile Device __________________ R.I.P. Killer 71 10/26/07

07-29-2012, 12:18 PM	#286
TXPinstriper Registered User Join Date: Jan 2012 Location: Santa Fe, Texas Posts: 352	Re: 72 Not sure what to call it yet resto! Chris the Vintage air is not bad to install I have the Gen IV if you have any questions let me know.... Posted via Mobile Device __________________ Stocker to Rocker http://67-72chevytrucks.com/vboard/s...=1#post5148380 "THE GRADUATE" http://67-72chevytrucks.com/vboard/s...08#post5763408 JohnnyC http://instagram.com/texpinstriper/

09-27-2012, 03:09 PM	#287
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 72 Not sure what to call it yet resto! any updates ? __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

12-10-2012, 01:17 PM	#289
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: 72 Not sure what to call it yet resto! Subcribed!

12-10-2012, 03:42 PM	#290
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 72 Not sure what to call it yet resto! looking forward to the progress ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-10-2012, 05:11 PM	#291
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 72 Not sure what to call it yet resto! Anything new here? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-16-2012, 10:10 PM	#292
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: 72 Not sure what to call it yet resto! Your truck looks great Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

02-05-2013, 06:59 AM	#293
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Okay finally I will have some updated pics on here this evening maybe. Got the fastburn fired and she moves under power.. and stops! Milestone for me to say the least after all of this. Man! Lots of killer projects going here on the board, could take all month just to catch up. __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

02-05-2013, 07:53 AM	#294
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: 72 Not sure what to call it yet resto! Awesome work. Everything looks great! "Shorty" seems fitting for the truck. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-05-2013, 09:05 AM	#296
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 72 Not sure what to call it yet resto! Nice can't wait to see some pics of your progress __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-05-2013, 09:06 AM	#297
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 72 Not sure what to call it yet resto! looking forward to updates __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-05-2013, 07:16 PM	#298
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: 72 Not sure what to call it yet resto! Okay here we go with a few pics... everything is still in progress at this point. The Vintage Air is in, American Wire and all the other goodys... Lord is it fun! It's been several months since I had any time or intrest in fooling with it. Decided last week to get after it again. Attached Images __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870



Register or Log In To remove these advertisements.

02-06-2013, 06:40 PM	#300
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 72 Not sure what to call it yet resto! looking good. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.