540 BBC 68 Burb Dually 54" Boggers on Rocks

[68burbanontherocks]

Originally Posted by Mykk

Sweet build, love seeing it come together.

Not sure if this has been asked yet......but, how are you going to get it out of the garage?

Legit question, i get asked it about every day from the UPS/USPS/ FedEx or Neighbor or my wife haha. Basically i will hopefully get around to mounting the shocks and links on here in the next week or so then i will basically lift the body off the chassis and roll the frame out into the driveway then drop the body down and roll that out of the garage. I also have 235/75 r16 transport tires to lower it a bit haha. Ill make sure to take some pics of when i do it cause everyone wants to know how!!!

[68burbanontherocks]

Back passenger dually fender. Even tried to keep the original body line, didnt show up very well on my phone...
Posted via Mobile Device
Posted via Mobile Device

[RatRod68]

Looks awesome brother

[68burbanontherocks]

Originally Posted by RatRod68

Looks awesome brother

Thanks buddy, the motor just got done and dynoed. 1372 hp and 1168 lbft of tq. With alcohol and a 15% overdrive pulley lots of timing and like 12 or 13 lbs of boost. I wont run near those kind of numbers though, I have a 10% overdrive about 7 lbs of boost and reduced timing to reduce detonation. Still over 1000 hp just not friggen almost 1400! lol

[y5mgisi]

That should be plenty fun!

[RatRod68]

Schweeeeeeeeeet

[68burbanontherocks]

Originally Posted by y5mgisi

That should be plenty fun!

Thanks buddy. I just designed all my tabs and brackets and should get them all cut out in the next day or so. just used an auto cad program, What do ya think???
Posted via Mobile Device
Posted via Mobile Device

[68burbanontherocks]

Originally Posted by RatRod68

Schweeeeeeeeeet

Haha it should be pretty awesome ill throw some pics of it up as well as a dyno pull later.
Posted via Mobile Device

[68burbanontherocks]

So along with stretching the fenders by 14" to contour the 54" boggers i also boxed the fenders so that mud and other debris wont get in them. Also will make cleanup a breeze! Let me know what you think!
Posted via Mobile Device

[68burbanontherocks]

Taking way longer than i thought it was gonna haha. This is at about 8 hours of work. 15 total including the stretch job. So im gonna assume about 22-25 hours of work to get these fenders done along with body filler work.
Posted via Mobile Device
Posted via Mobile Device

[y5mgisi]

Great work man! What gauge steel are you using?

[68burbanontherocks]

Originally Posted by y5mgisi

Great work man! What gauge steel are you using?

Fenders. 16 ga cold rolled. Easy to cut easy to weld and doesnt warp doo bad. Quarter pannels are also 16 ga and the wheel wells are 18 ga. Floor is 1/8 in diamond plate with 1x3 .120 wall (1/8) running accross. Frame shock mounts and roll cage is all 2"x.120. Links are 2.75"x.500. Bumpers and shock tabs are 3/8" and dash is 16 ga hope this all helps paint a picture lol
Posted via Mobile Device

[y5mgisi]

Cool man good to know.

[thor]

Originally Posted by 68burbanontherocks

Thanks buddy, the motor just got done and dynoed. 1372 hp and 1168 lbft of tq. With alcohol and a 15% overdrive pulley lots of timing and like 12 or 13 lbs of boost. I wont run near those kind of numbers though, I have a 10% overdrive about 7 lbs of boost and reduced timing to reduce detonation. Still over 1000 hp just not friggen almost 1400! lol

Brap, brap!

Originally Posted by 68burbanontherocks

So along with stretching the fenders by 14" to contour the 54" boggers i also boxed the fenders so that mud and other debris wont get in them. Also will make cleanup a breeze! Let me know what you think!
Posted via Mobile Device

Good idea!

[68burbanontherocks]

Built a nice gawdy bumper for the rear and onto the front today! Have more pics just real busy so dont have too much free time. Truck needs to be done in 25 days ahhhh!
Posted via Mobile Device

[y5mgisi]

Damn that thing looks stout!

[68burbanontherocks]

All im going to say is my right foot and a 1388 hp and 1266 lb/ft tq blown alcohol injected 572 cubic inch big block chevy are going to make for one fun combination! I see this as the beginning of a very good relationship...
Posted via Mobile Device
Posted via Mobile Device

[RatRod68]

:fap: :fap: :fap:

[68burbanontherocks]

Worked till about 330 last night got the motor and trans mocked into where i think its gonna sit. Finished the front bumper and started weldin it up. Things just take a good bit longer when your doing it moslty by yourself!
Posted via Mobile Device
Posted via Mobile Device

[68burbanontherocks]

Originally Posted by RatRod68

:fap: :fap: :fap:

dont worry i made sure to give it a bedtime story left a little night light on and tucked it in before i closed the garage door
Posted via Mobile Device

[RatRod68]

Is that body filler and primer i see? Awesome! That means you should have this thing driving real soon!

[68burbanontherocks]

Just a lil mud. If you remember i capped and welded the inside of the fenders as well as stretched them like 14" so when i did that i just had to throw some filler where the fenders were flap diked to straighten them out. No big deal... there just gonna get scrapped when i roll it the first time!
Posted via Mobile Device

[RatRod68]

aint nuthin wrong with a lil mud... Although there is A LOT wrong with A LOT of mud. lol

[68burbanontherocks]

Well it was a long day but i got the motor all buttoned up and into place.
Posted via Mobile Device
Posted via Mobile Device

[68burbanontherocks]

Oh and all my link tabs came! Overkill is what i named the truck and did it in the monster logo font. And sw stands for stazworks one of my sponsors for my wheels and emf is evolution machine and fab who sponsored me for my heim joints. Oh as well as monster my primary sponsor!
Posted via Mobile Device
Posted via Mobile Device