What did you do to your truck today.The 3rd chapter - Page 121 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 11-07-2022, 06:15 PM

Put the inner skirt on . It’s real nice not having to fight the panels . And I seem to have miss placed one of the big washered bolts the one with the f shims . I found one and the four f shims .

**Jiggers72-GMC** · 11-07-2022, 08:22 PM

Very nice 'Good man'' ....... well done Mark ....... great work guys!!

**Johnl48** · 11-26-2022, 07:00 PM

Got a fender on today

LNP · 11-26-2022, 07:34 PM

Sweet!

Peanut74 · 11-26-2022, 07:43 PM

Well I started reassemling my passenger door. Got the DIY electric winder assembly in and working. Just need to finish it up tomorrow.
.

LNP · 11-26-2022, 08:00 PM

Looks good

72c20customcamper · 11-27-2022, 11:04 AM

Redoing the bedwood on my stepper . Something got on it in the barn over last winter and discolored it . So I replaned it and sanded till it was acceptable . This time I’m using a marine waterborne spar urethane. So far it’s looking good reason I’m trying it is I need to do this in the basement so fumes wood stove and gas water heater don’t mix all that well .

LNP · 11-27-2022, 11:27 AM

Looks real good

**Grumpy old man** · 12-02-2022, 04:38 PM

The black real leather showed up today for my 67 custom interior build , Now I have to cut up a set of 67 folding bench seats to build a set of buckets .

**Jiggers72-GMC** · 12-02-2022, 05:04 PM

That's one way to get bucket seats, I can't wait to see the results .........

evilokc · 12-02-2022, 05:24 PM

i removed my steering wheel in order to change out the turn signal switch. i took the opportunity to clean and polish the steering wheel. plan to really polish up the column as well before i put it back together. i did find out that my steering wheel is worth $500 bucks which is neat. i bought it about 15 years ago for about $200. i was thinking about removing it for an original wheel. nice to know if i decide to do that i will be able to sell it for a little $$. i also pulled the bed off for better access. i prepping for undercoating. im probably going to have to use a combo of roll on and aerosol. anyone have good luck with specific brands?

72c20customcamper · 12-02-2022, 05:45 PM

Quote:

Originally Posted by evilokc

i removed my steering wheel in order to change out the turn signal switch. i took the opportunity to clean and polish the steering wheel. plan to really polish up the column as well before i put it back together. i did find out that my steering wheel is worth $500 bucks which is neat. i bought it about 15 years ago for about $200. i was thinking about removing it for an original wheel. nice to know if i decide to do that i will be able to sell it for a little $$. i also pulled the bed off for better access. i prepping for undercoating. im probably going to have to use a combo of roll on and aerosol. anyone have good luck with specific brands?

Pictures of the steering wheel would be nice

I started to put the wood back in today . Amazing how dirty a frame gets just sitting the little black dots are worm holes I filled with epoxy prior to the polyurethane.

evilokc · 12-03-2022, 02:26 PM

[QUOTE=72c20customcamper;9150819]Pictures of the steering wheel would be nice

Its just a Grant Mahogony banjo wheel like this one. i bought it new with my ididt it column in about 98.

72c20customcamper · 12-03-2022, 05:17 PM

[quote=evilokc;9151097]

Quote:

Originally Posted by 72c20customcamper

Pictures of the steering wheel would be nice

Its just a Grant Mahogony banjo wheel like this one. i bought it new with my ididt it column in about 98.

Nice looking wheel . Looks similar to the one that was in my Avanti II not my picture but the same wheel

72c20customcamper · 12-12-2022, 05:36 PM

Got board

so to speak . Cut and buffed one of the bed boards 2500 then some med cut compound. Worked best by hand then three coats of wax . Guess I won’t be putting firewood in this truck

**Palf70Step** · 12-02-2022, 07:29 PM

Spent the day redoing all the battery and chassis/body grounds on the truck. Tomorrow is under dash wiring cleanup and install new ignition switch.

**Johnl48** · 12-02-2022, 07:37 PM

Drivers side fender is on as well as the paint divider molding on back of cab

**Grumpy old man** · 12-02-2022, 10:25 PM

Quote:

Originally Posted by Johnl48

Drivers side fender is on as well as the paint divider molding on back of cab

That truck reminds me of an almost identicle truck a guy named Joe Mines from your area owned in the 1970's he owned Joe Mines Blasting and it had a set of aluminum slots on it . One of the best looking trucks on the road in North Jersey at the time . Very Nice !

mr.mud1 · 12-03-2022, 09:04 AM

Quote:

Originally Posted by Johnl48

Drivers side fender is on as well as the paint divider molding on back of cab

looking very nice,great work.lots of attention to detail here and it show.beautiful.

Chevys4life · 12-12-2022, 07:52 PM

Quote:

Originally Posted by Johnl48

Drivers side fender is on as well as the paint divider molding on back of cab

That truck is looking good!!!!!

v8truckin · 12-02-2022, 10:06 PM

Got her back from body and paint work. She’s perfect now!

mr.mud1 · 12-03-2022, 09:01 AM

Quote:

Originally Posted by v8truckin

Got her back from body and paint work. She’s perfect now!

very,very nice.love the white and black.

OregonNed · 12-13-2022, 11:53 AM

Promised her that she would get out the next dry weekend.

72c20customcamper · 12-16-2022, 04:40 PM

Snowed again . Tried something different on the bed wood used a buffer attachment for doing headlamps . Worked out real well ,I have two more to do but don’t feel like crawling under the truck to loosen the bolts . And it’s like 95 degrees in the basement love sweating in shorts .

**Palf70Step** · 12-16-2022, 11:12 PM

Took the ole guy out for some driving today. Nice winter (50s for us) weather here. Took in some of the local coast attractions. Sure is nice to have it mobile again.

11-07-2022, 06:15 PM	#1
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,728	Re: What did you do to your truck today.The 3rd chapter Put the inner skirt on . It’s real nice not having to fight the panels . And I seem to have miss placed one of the big washered bolts the one with the f shims . I found one and the four f shims . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. Last edited by 72c20customcamper; 11-07-2022 at 07:30 PM.

11-07-2022, 08:22 PM	#2
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter Very nice 'Good man'' ....... well done Mark ....... great work guys!! __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

11-26-2022, 07:00 PM	#3
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 326	Re: What did you do to your truck today.The 3rd chapter Got a fender on today

11-26-2022, 07:34 PM	#4
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 442	Re: What did you do to your truck today.The 3rd chapter Sweet! __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

11-26-2022, 07:43 PM	#5
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: What did you do to your truck today.The 3rd chapter Well I started reassemling my passenger door. Got the DIY electric winder assembly in and working. Just need to finish it up tomorrow. . Attached Images __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

11-26-2022, 08:00 PM	#6
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 442	Re: What did you do to your truck today.The 3rd chapter Looks good __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

11-27-2022, 11:04 AM	#7
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,728	Re: What did you do to your truck today.The 3rd chapter Redoing the bedwood on my stepper . Something got on it in the barn over last winter and discolored it . So I replaned it and sanded till it was acceptable . This time I’m using a marine waterborne spar urethane. So far it’s looking good reason I’m trying it is I need to do this in the basement so fumes wood stove and gas water heater don’t mix all that well . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

11-27-2022, 11:27 AM	#8
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 442	Re: What did you do to your truck today.The 3rd chapter Looks real good __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

12-02-2022, 04:38 PM	#9
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: What did you do to your truck today.The 3rd chapter The black real leather showed up today for my 67 custom interior build , Now I have to cut up a set of 67 folding bench seats to build a set of buckets . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

12-02-2022, 05:04 PM	#10
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter That's one way to get bucket seats, I can't wait to see the results ......... __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

12-02-2022, 05:24 PM	#11
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do to your truck today.The 3rd chapter i removed my steering wheel in order to change out the turn signal switch. i took the opportunity to clean and polish the steering wheel. plan to really polish up the column as well before i put it back together. i did find out that my steering wheel is worth $500 bucks which is neat. i bought it about 15 years ago for about $200. i was thinking about removing it for an original wheel. nice to know if i decide to do that i will be able to sell it for a little $$. i also pulled the bed off for better access. i prepping for undercoating. im probably going to have to use a combo of roll on and aerosol. anyone have good luck with specific brands?

12-03-2022, 02:26 PM	#13
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do to your truck today.The 3rd chapter [QUOTE=72c20customcamper;9150819]Pictures of the steering wheel would be nice Its just a Grant Mahogony banjo wheel like this one. i bought it new with my ididt it column in about 98. Attached Images

12-12-2022, 05:36 PM	#15
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,728	Re: What did you do to your truck today.The 3rd chapter Got board so to speak . Cut and buffed one of the bed boards 2500 then some med cut compound. Worked best by hand then three coats of wax . Guess I won’t be putting firewood in this truck Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

12-02-2022, 07:29 PM	#16
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,228	Re: What did you do to your truck today.The 3rd chapter Spent the day redoing all the battery and chassis/body grounds on the truck. Tomorrow is under dash wiring cleanup and install new ignition switch. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-02-2022, 07:37 PM	#17
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 326	Re: What did you do to your truck today.The 3rd chapter Drivers side fender is on as well as the paint divider molding on back of cab



Register or Log In To remove these advertisements.

12-02-2022, 10:06 PM	#21
v8truckin Registered User Join Date: Oct 2020 Location: California Posts: 21	Re: What did you do to your truck today.The 3rd chapter Got her back from body and paint work. She’s perfect now! Attached Images Last edited by v8truckin; 12-02-2022 at 10:12 PM.

12-13-2022, 11:53 AM	#23
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Promised her that she would get out the next dry weekend. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

12-16-2022, 04:40 PM	#24
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,728	Re: What did you do to your truck today.The 3rd chapter Snowed again . Tried something different on the bed wood used a buffer attachment for doing headlamps . Worked out real well ,I have two more to do but don’t feel like crawling under the truck to loosen the bolts . And it’s like 95 degrees in the basement love sweating in shorts . Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

12-16-2022, 11:12 PM	#25
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,228	Re: What did you do to your truck today.The 3rd chapter Took the ole guy out for some driving today. Nice winter (50s for us) weather here. Took in some of the local coast attractions. Sure is nice to have it mobile again. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.