Billet Radio Plate for cut dash...opinions? - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trenz68 · 03-13-2009, 08:17 AM

Aluminum radio mounting plate $50

http://67-72chevytrucks.com/vboard/s...d.php?t=322847

*Shane* · 03-13-2009, 10:54 AM

FYI - Those are NOT the same plates.

**thelonerife** · 03-13-2009, 11:42 AM

I bought a set of four from hifi sound connection. they are different widths all around the cd face 1/8''-3/4''.

Riveted1 · 03-13-2009, 12:58 PM

Quote:

Originally Posted by hotvdub

Put me on the list !!

mahanian · 05-11-2009, 11:01 PM

Ok, I've been off the board for awhile now dealing with other things in my life, but I'm back. I have 8 radio bezels left and I will make a list of who has emailed and PM'd me by date and offer them up. If I get enough interest I will have a new batch made up. I've been dealing with the provisional patent on these for awhile now and think I got the bugs worked out. I'll pay update my vendor subscription right now so there are no problems

71meangreenc10 · 05-12-2009, 12:55 AM

Put me in line for 1,,,please let me know the price too, Ive seen all kinds of quotes.

Thanks

Smitty

lowdownstar · 05-12-2009, 06:23 AM

I am interested in two myself

Thanks Ray

short wide 4x4 · 05-12-2009, 06:43 AM

Put me in line, I would like one.

Pastdue72 · 05-12-2009, 08:37 AM

Are there any pics of one of these installed in a truck with the radio and/or without the radio?

lchall · 05-12-2009, 09:00 AM

Put me in line for a polished radio bezel.

Thanks - Chad

lchall · 05-12-2009, 09:17 AM

Did you ever decide to make the 1-piece plate for the heater area? I would be interested in one as well.

weircc · 05-12-2009, 09:26 AM

bump would be interested in one piece heater plate as well

mahanian · 05-12-2009, 04:10 PM

Quote:

Originally Posted by Pastdue72

Are there any pics of one of these installed in a truck with the radio and/or without the radio?

Gringoloco posted some installed pics with a radio. Check them out

http://67-72chevytrucks.com/vboard/s...&postcount=248

Quote:

Originally Posted by lchall

Did you ever decide to make the 1-piece plate for the heater area? I would be interested in one as well.

Quote:

Originally Posted by weircc

bump would be interested in one piece heater plate as well

The heater trim piece for the 68-72 trucks never got completed but I will look into it again soon...

mahanian · 05-12-2009, 05:09 PM

I just replied to the first group of people that wanted to buy one of my bezels. I'll give each of them a couple days to reply and then offer them up to the next guys in line. If I sell out I will order another batch.

Here is the current list in order of contact date. I will keep this list updated as they are purchased.

Green=PM'd
Blue=Purchased
Red=Did not reply in time
Black=In line

bdydrp97s10
lks dcvn
BowTieMan
tinlid
Cheyenne Dan
nac593
mike nutt
72HULK
Prostreet 67
chalet2506
PICKMUP
Coalson01
short wide 4x4
ftgauto
rob32472
thelonerife
uno67
lowdownstar
Shane
71Custom10
teamradrz1
blazin27
71meangreenc10
lchall

Pastdue72 · 05-12-2009, 09:07 PM

How much are these? and are you going to make a piece for the heater like was previously asked?

bdydrp97s10 · 05-12-2009, 11:12 PM

pass

mahanian · 05-15-2009, 12:11 AM

Quote:

Originally Posted by trenz68

Aluminum radio mounting plate $50

http://67-72chevytrucks.com/vboard/s...d.php?t=322847

Just thought I should respond to this comment. The guy in the thread making these plates, Mekdad, is the guy I had machine all my radio plates. I work with a lot of machinists and could have had these parts made locally but I was trying to support people in our truck community.

I took all the measurements, paid for the CAD time to have it drawn up, bought prototypes from Mekdad to perfect the design, and then ordered them from him, only to have him steal my design and change it slightly to sell it as his own. I've even had people tell me he is selling my design as his own as well. I'm not one to bad mouth anyone on this site, I'll let you make your judgement call...

*Shane* · 05-15-2009, 10:14 AM

mahanian, i will take one if you have any left. I will be sending you a PM you as well.

thanks.

mahanian · 05-27-2009, 12:02 PM

I still have a few bezels left if anyone is interested

The cost is $95 for a fully polished bezel shipped priority mail to you door. If you receive the bezel and aren't 100% satisfied with the quality of the part in any way you can ship it back and I'll gladly give you a full refund!

C-10 Addict · 02-20-2010, 11:19 PM

Are you still making these or did you get tired of all the bs and stop??interested in one

roughedup72 · 02-21-2010, 11:04 PM

I am also interested if you are still making them. It looks like a really nice piece. Hate I just saw this thread.

smokinstang70 · 02-21-2010, 11:10 PM

interested.. put me in line!!!

Thanks

**Already Gone** · 02-22-2010, 01:07 AM

I'll take one too.

silver7 · 02-22-2010, 10:43 PM

Please sign me up for one as well!

dhc871 · 02-23-2010, 12:48 PM

I would like one too.

03-13-2009, 08:17 AM	#301
trenz68 Damage Inc Join Date: Dec 2008 Location: Baytown Tx Posts: 336	Re: Billet Radio Plate for cut dash...opinions? Aluminum radio mounting plate $50 http://67-72chevytrucks.com/vboard/s...d.php?t=322847 Last edited by trenz68; 03-13-2009 at 08:17 AM.

03-13-2009, 10:54 AM	#302
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Billet Radio Plate for cut dash...opinions? FYI - Those are NOT the same plates.

03-13-2009, 11:42 AM	#303
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Billet Radio Plate for cut dash...opinions? I bought a set of four from hifi sound connection. they are different widths all around the cd face 1/8''-3/4''. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

05-11-2009, 11:01 PM	#305
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? Ok, I've been off the board for awhile now dealing with other things in my life, but I'm back. I have 8 radio bezels left and I will make a list of who has emailed and PM'd me by date and offer them up. If I get enough interest I will have a new batch made up. I've been dealing with the provisional patent on these for awhile now and think I got the bugs worked out. I'll pay update my vendor subscription right now so there are no problems

05-12-2009, 12:55 AM	#306
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Billet Radio Plate for cut dash...opinions? Put me in line for 1,,,please let me know the price too, Ive seen all kinds of quotes. Thanks Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

05-12-2009, 06:23 AM	#307
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: Billet Radio Plate for cut dash...opinions? I am interested in two myself Thanks Ray Last edited by lowdownstar; 05-12-2009 at 06:25 AM.

05-12-2009, 06:43 AM	#308
short wide 4x4 Junior Member Join Date: Dec 2003 Location: Kerrville, Tx. Posts: 106	Re: Billet Radio Plate for cut dash...opinions? Put me in line, I would like one. __________________ 72 fleetside 1/2 ton swb 4x4 66 El Camino Black on Black & VERY FAST!!!

05-12-2009, 08:37 AM	#309
Pastdue72 Registered User Join Date: Apr 2009 Location: Dallas, TX Posts: 93	Re: Billet Radio Plate for cut dash...opinions? Are there any pics of one of these installed in a truck with the radio and/or without the radio? __________________ 71 Chevy lwb Super Cheyenne - http://67-72chevytrucks.com/vboard/s...d.php?t=341907

05-12-2009, 09:00 AM	#310
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Billet Radio Plate for cut dash...opinions? Put me in line for a polished radio bezel. Thanks - Chad __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

05-12-2009, 09:17 AM	#311
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Billet Radio Plate for cut dash...opinions? Did you ever decide to make the 1-piece plate for the heater area? I would be interested in one as well. __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

05-12-2009, 09:26 AM	#312
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: Billet Radio Plate for cut dash...opinions? bump would be interested in one piece heater plate as well

05-12-2009, 05:09 PM	#314
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? I just replied to the first group of people that wanted to buy one of my bezels. I'll give each of them a couple days to reply and then offer them up to the next guys in line. If I sell out I will order another batch. Here is the current list in order of contact date. I will keep this list updated as they are purchased. Green=PM'd Blue=Purchased Red=Did not reply in time Black=In line bdydrp97s10 lks dcvn BowTieMan tinlid Cheyenne Dan nac593 mike nutt 72HULK Prostreet 67 chalet2506 PICKMUP Coalson01 short wide 4x4 ftgauto rob32472 thelonerife uno67 lowdownstar Shane 71Custom10 teamradrz1 blazin27 71meangreenc10 lchall Last edited by mahanian; 05-12-2009 at 05:12 PM.

05-12-2009, 09:07 PM	#315
Pastdue72 Registered User Join Date: Apr 2009 Location: Dallas, TX Posts: 93	Re: Billet Radio Plate for cut dash...opinions? How much are these? and are you going to make a piece for the heater like was previously asked? __________________ 71 Chevy lwb Super Cheyenne - http://67-72chevytrucks.com/vboard/s...d.php?t=341907

05-12-2009, 11:12 PM	#316
bdydrp97s10 Registered User Join Date: Dec 2007 Location: Johnson City TN Posts: 570	Re: Billet Radio Plate for cut dash...opinions? pass __________________ My build thread--http://67-72chevytrucks.com/vboard/s...d.php?t=300333

05-15-2009, 10:14 AM	#318
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Billet Radio Plate for cut dash...opinions? mahanian, i will take one if you have any left. I will be sending you a PM you as well. thanks.



Register or Log In To remove these advertisements.

05-27-2009, 12:02 PM	#319
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Radio Plate for cut dash...opinions? I still have a few bezels left if anyone is interested The cost is $95 for a fully polished bezel shipped priority mail to you door. If you receive the bezel and aren't 100% satisfied with the quality of the part in any way you can ship it back and I'll gladly give you a full refund!

02-20-2010, 11:19 PM	#320
C-10 Addict Registered User Join Date: Jan 2010 Location: Lilburn Georgia Posts: 24	Re: Billet Radio Plate for cut dash...opinions? Are you still making these or did you get tired of all the bs and stop??interested in one

02-21-2010, 11:04 PM	#321
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: Billet Radio Plate for cut dash...opinions? I am also interested if you are still making them. It looks like a really nice piece. Hate I just saw this thread. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

02-21-2010, 11:10 PM	#322
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Billet Radio Plate for cut dash...opinions? interested.. put me in line!!! Thanks

02-22-2010, 01:07 AM	#323
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Billet Radio Plate for cut dash...opinions? I'll take one too. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

02-22-2010, 10:43 PM	#324
silver7 Registered User Join Date: Jul 2009 Location: High Point, NC Posts: 613	Re: Billet Radio Plate for cut dash...opinions? Please sign me up for one as well! __________________ Shawn 1971 C10 4x4

02-23-2010, 12:48 PM	#325
dhc871 Registered User Join Date: Aug 2009 Location: El Paso, TX Posts: 16	Re: Billet Radio Plate for cut dash...opinions? I would like one too.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.