How about some pics of 67-72 Burbans! - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prairewolf · 08-22-2007, 05:56 AM

1Sik7t2, I will NEVER tell people to keep thier vehicle stock again. that driver side shot is awsome. seriously... now I have to go to photo chop request page and see if someone will lower mine. thanks for sharing pictures. .. life is good,kent

1sik7t2 · 08-22-2007, 10:44 AM

hey salvageit, the rear backspace is 5" front is 4 3/4" but the front also has a 1/4" spacer because wheel wouldn't fit over the hub and the front end is narrowed 1 1/4(ball joints moved in) bagging the burb isn,t that hard all depends on how low you wanna go the lower the more cutting just to bag them and set them on the wheels, no big deal only one recommendation, find a shop that truly knows the stuff lots can do it, but doing it right is what we want, STOCK SUCKS DAVE

1sik7t2 · 08-22-2007, 10:46 AM

PRAIRIEWOLF thanks for the complement yea i think stock pretty much SUCKS custom is king

salvageit · 08-22-2007, 10:53 PM

Thanks 1sik, I will end up doing the work my self, I work in a fab shop we just go the other way with vehicles so I just need a little direction in the lowering game. The wheels I got have 5.72 backspacing so I am a little worried now that you say yours is 5 in the rear

1sik7t2 · 08-22-2007, 11:26 PM

before i bought the burb they had already changed the axle's to half ton (my burb is 3/4) not sure that makes a difference? (five lugs) ????

salvageit · 08-22-2007, 11:41 PM

most likely not, I was little worried that they would hit the inside of the fender wells. I guess spacers are an option.

salvageit · 08-22-2007, 11:45 PM

was there a reason you went with 20's in the front ( for clearence issue) or just the stagggerd look?

1sik7t2 · 08-23-2007, 10:30 AM

already had that stagger when i bought it i would like to run 22's around then need new wheels, more money, blah blah blah and the "hotrod" look is cool probably couldn't drive and turn as low with 22's i can make a "u" turn with the body about 1" off the ground (help from the narrowed front end of course) 22's not

va_tlc · 08-26-2007, 09:28 PM

man these are some fine looking burbs yall have..... done peaked my intrest in them. i looked at a 72 in fla. while on vacation a 3/4, man that thing was rusted up even the hood was rusted thru. they wanted way to much fer this ole boy thou.... keep the pics coming

bill farry · 08-29-2007, 03:44 PM

how do i post my 67 chevy custom panel t/u bill

**Chevy454** · 09-04-2007, 03:01 PM

Figured I'd contribute my latest addition...(pics aren't the greatest, sorry!)

rodbearing · 09-04-2007, 05:33 PM

Here's my project! She's a honey!!!

scotto0609 · 09-04-2007, 08:32 PM

I love it!!

scotto0609 · 09-05-2007, 09:43 PM

THere all the time,will be in santa ana this weekend is it close to you?

38chevyhotrod · 10-11-2007, 02:34 PM

Finally I can post a pic of my 71 Suburban.
I have a lot to do but I like how it looks already.

earl87gta · 10-11-2007, 02:40 PM

rodbearing
does it have a disel in it? can we get a pic of the engine if it does ?

earl87gta · 10-11-2007, 02:40 PM

38chevyhotrod
I love that color if I had a 2wd thats what paint I would use, good looking burb.

Frizzle Fry · 10-11-2007, 03:15 PM

Quote:

Originally Posted by 38chevyhotrod

Finally I can post a pic of my 71 Suburban.
I have a lot to do but I like how it looks already.

I see a rear bumper...? Is that a pic from before shipping? Looks pretty solid!

38chevyhotrod · 10-11-2007, 04:27 PM

He is pretty solid, there are a few rusted spots and I found some filler.
But that won't be a problem to fix.

The plans are to bag it and channel it, maybe I am going to Z the frame but I don't know if that will be necessary.
For the rest it will be pretty standard.

Here is a picture of the nice bumper on the back

That is why I ordered a new stock one.

**KevsClassics** · 10-21-2007, 12:31 AM

Here's some pics of Ace's 72 Sub It features a 383 stroker/700r4, air ride system, Boyds 18's

68burb · 10-21-2007, 12:43 AM

that is the perfect stance i'm looking for!!!

whats the combo?
is the rear notched
just drop spindles in the front with bags?

earl87gta · 10-21-2007, 12:46 AM

Wow thats a clean Burb.

38chevyhotrod
I see why you need a new bumper that thing is ugly.

**KevsClassics** · 10-21-2007, 01:23 AM

Quote:

Originally Posted by 68burb

that is the perfect stance i'm looking for!!!

whats the combo?
is the rear notched
just drop spindles in the front with bags?

Bags front & rear. 2 1/2" drop spindles. rear C notched.

38chevyhotrod · 10-21-2007, 04:05 AM

That is a really nice one, that thing is brand new.
Is this the lowest it can get?

1sik7t2 · 10-22-2007, 06:21 PM

woooooww B U T FUL AWESOME RIDE WHEN I WAS LOOKING FOR MINE I SAW ONE IN CHINO, CALI JUST LIKE YOURS IS IT THE SAME ONE???? 38 CHEVY IS RIGHT LOOKS BRAND NEW VERY NICE

08-22-2007, 05:56 AM	#301
prairewolf Registered User Join Date: Oct 2005 Location: south dakota Posts: 1,895	Re: Let's see some Burbans! 1Sik7t2, I will NEVER tell people to keep thier vehicle stock again. that driver side shot is awsome. seriously... now I have to go to photo chop request page and see if someone will lower mine. thanks for sharing pictures. .. life is good,kent

08-22-2007, 10:44 AM	#302
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Let's see some Burbans! hey salvageit, the rear backspace is 5" front is 4 3/4" but the front also has a 1/4" spacer because wheel wouldn't fit over the hub and the front end is narrowed 1 1/4(ball joints moved in) bagging the burb isn,t that hard all depends on how low you wanna go the lower the more cutting just to bag them and set them on the wheels, no big deal only one recommendation, find a shop that truly knows the stuff lots can do it, but doing it right is what we want, STOCK SUCKS DAVE __________________ check out my build "DIRTY BURB"

08-22-2007, 10:46 AM	#303
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Let's see some Burbans! PRAIRIEWOLF thanks for the complement yea i think stock pretty much SUCKS custom is king __________________ check out my build "DIRTY BURB"

08-22-2007, 10:53 PM	#304
salvageit Registered User Join Date: Aug 2007 Location: Ogden, Utah Posts: 38	Re: Let's see some Burbans! Thanks 1sik, I will end up doing the work my self, I work in a fab shop we just go the other way with vehicles so I just need a little direction in the lowering game. The wheels I got have 5.72 backspacing so I am a little worried now that you say yours is 5 in the rear

08-22-2007, 11:26 PM	#305
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Let's see some Burbans! before i bought the burb they had already changed the axle's to half ton (my burb is 3/4) not sure that makes a difference? (five lugs) ???? __________________ check out my build "DIRTY BURB"

08-22-2007, 11:41 PM	#306
salvageit Registered User Join Date: Aug 2007 Location: Ogden, Utah Posts: 38	Re: Let's see some Burbans! most likely not, I was little worried that they would hit the inside of the fender wells. I guess spacers are an option.

08-22-2007, 11:45 PM	#307
salvageit Registered User Join Date: Aug 2007 Location: Ogden, Utah Posts: 38	Re: Let's see some Burbans! was there a reason you went with 20's in the front ( for clearence issue) or just the stagggerd look?

08-23-2007, 10:30 AM	#308
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Let's see some Burbans! already had that stagger when i bought it i would like to run 22's around then need new wheels, more money, blah blah blah and the "hotrod" look is cool probably couldn't drive and turn as low with 22's i can make a "u" turn with the body about 1" off the ground (help from the narrowed front end of course) 22's not __________________ check out my build "DIRTY BURB"

08-26-2007, 09:28 PM	#309
va_tlc Registered User Join Date: Nov 2005 Location: VIRGINIA Posts: 905	Re: Let's see some Burbans! man these are some fine looking burbs yall have..... done peaked my intrest in them. i looked at a 72 in fla. while on vacation a 3/4, man that thing was rusted up even the hood was rusted thru. they wanted way to much fer this ole boy thou.... keep the pics coming __________________ 1969 rs 1966fastback 1969swbc/10 2006gt 1972swb4x4

08-29-2007, 03:44 PM	#310
bill farry Registered User Join Date: Aug 2007 Location: vista ca. Posts: 2	Re: Let's see some Burbans! how do i post my 67 chevy custom panel t/u bill

09-04-2007, 03:01 PM	#311
Chevy454 Registered User Join Date: Dec 1999 Location: Alton, MO Posts: 145	Re: Let's see some Burbans! Figured I'd contribute my latest addition...(pics aren't the greatest, sorry!) Attached Images __________________ '72 Super Custom Suburban - 402/400, original bucket seats, 3rd seat, rear air, tilt A few Yenko cars Interested in COPOs, Yenkos or other dealer built muscle cars then go here:www.yenko.net Last edited by Chevy454; 09-04-2007 at 03:02 PM.

09-04-2007, 05:33 PM	#312
rodbearing Registered User Join Date: Sep 2007 Location: Apple Valley, Ca. Posts: 10	Re: Let's see some Burbans! Here's my project! She's a honey!!! Attached Images

09-04-2007, 08:32 PM	#313
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: Let's see some Burbans! I love it!!

09-05-2007, 09:43 PM	#314
scotto0609 Junior Member Join Date: Nov 2005 Location: new york Posts: 226	Re: Let's see some Burbans! THere all the time,will be in santa ana this weekend is it close to you?

10-11-2007, 02:34 PM	#315
38chevyhotrod Registered User Join Date: Jun 2007 Location: Netherlands Posts: 191	Re: Let's see some Burbans! Finally I can post a pic of my 71 Suburban. I have a lot to do but I like how it looks already. __________________ Anybody can restore a classic, takes a man to cut one up..... http://www.arnoldscustoms.com



Register or Log In To remove these advertisements.

10-11-2007, 02:40 PM	#316
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Let's see some Burbans! rodbearing does it have a disel in it? can we get a pic of the engine if it does ? __________________ Earl 68 2500 4x4 GMC Burb

10-11-2007, 02:40 PM	#317
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Let's see some Burbans! 38chevyhotrod I love that color if I had a 2wd thats what paint I would use, good looking burb. __________________ Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 10-11-2007 at 02:42 PM.

10-11-2007, 04:27 PM	#319
38chevyhotrod Registered User Join Date: Jun 2007 Location: Netherlands Posts: 191	Re: Let's see some Burbans! He is pretty solid, there are a few rusted spots and I found some filler. But that won't be a problem to fix. The plans are to bag it and channel it, maybe I am going to Z the frame but I don't know if that will be necessary. For the rest it will be pretty standard. Here is a picture of the nice bumper on the back That is why I ordered a new stock one. __________________ Anybody can restore a classic, takes a man to cut one up..... http://www.arnoldscustoms.com Last edited by 38chevyhotrod; 10-11-2007 at 04:29 PM. Reason: picture didn't work

10-21-2007, 12:31 AM	#320
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Let's see some Burbans! Here's some pics of Ace's 72 Sub It features a 383 stroker/700r4, air ride system, Boyds 18's Attached Images

10-21-2007, 12:43 AM	#321
68burb Registered User Join Date: Jan 2007 Location: Keizer, Oregon Posts: 78	Re: Let's see some Burbans! that is the perfect stance i'm looking for!!! whats the combo? is the rear notched just drop spindles in the front with bags? __________________ 1968 K10 burb- on it's way to being C10 sporting a 454 th400 and LTZ 20's 1995 K2500 Burb as daily driver 350 with 193K miles 1994 K1500 Silverado ECSB building a TBI 350 for it 330 horse

10-21-2007, 12:46 AM	#322
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Let's see some Burbans! Wow thats a clean Burb. 38chevyhotrod I see why you need a new bumper that thing is ugly. __________________ Earl 68 2500 4x4 GMC Burb

10-21-2007, 04:05 AM	#324
38chevyhotrod Registered User Join Date: Jun 2007 Location: Netherlands Posts: 191	Re: Let's see some Burbans! That is a really nice one, that thing is brand new. Is this the lowest it can get? __________________ Anybody can restore a classic, takes a man to cut one up..... http://www.arnoldscustoms.com

10-22-2007, 06:21 PM	#325
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Let's see some Burbans! woooooww B U T FUL AWESOME RIDE WHEN I WAS LOOKING FOR MINE I SAW ONE IN CHINO, CALI JUST LIKE YOURS IS IT THE SAME ONE???? 38 CHEVY IS RIGHT LOOKS BRAND NEW VERY NICE __________________ check out my build "DIRTY BURB"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.