Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Daveboyd** · 10-22-2010, 04:30 PM

Quote:

Originally Posted by swamp rat

Thanks Dave!! But i was talking about the 2 terminals on the sending unit on my non EFI cell, sorry i didn't say that in my post..

Our supplier uses 2 different types of senders under the same part number. your tanks will have 1 of the 2 senders pictured below. the power wire goes to the middle post and the ground wire either goes the smaller lug or you have to use one of the mounting screws.

swamp rat · 10-22-2010, 07:19 PM

Quote:

Originally Posted by Daveboyd

Our supplier uses 2 different types of senders under the same part number. your tanks will have 1 of the 2 senders pictured below. the power wire goes to the middle post and the ground wire either goes the smaller lug or you have to use one of the mounting screws.

Thank you for taking the time out of your busy schedual to reply Dave, I appreciate it!

chapster · 11-01-2010, 03:29 PM

Hey Dave,

Have you talked to UPS yet since I spoke with you on the 22nd. I will try and take some pics of what we were discussing so you can have a better idea of what I am talking about.

Thanks,
Kevin

SWB4x4 · 11-07-2010, 04:49 PM

Hey Dave can you do a EFI Tank for my 68 Camaro? have you done one for any 1st Gen Camaros?

impalaboy9 · 11-14-2010, 09:12 AM

Dave, I was wondering if you have built any for a 65 swb stepside. I'm really wanting to get one of your tanks so I can have some stereo where the old tank sits. Anyone on this site have one for a 65?

**Clyde65** · 11-15-2010, 11:45 AM

Impalaboy,

They should work just fine, these should have no problem fitting 63-72 step or fleets. You can thumb through the thread and Dave put some measurements up and you can verify.

I will be getting one when they do the next GB in the spring.

**Daveboyd** · 11-19-2010, 03:04 PM

Here are some pics of our tanks at SEMA.

smokinstang70 · 11-19-2010, 06:09 PM

Tanks look great Dave... can't wait to get mine installed.

Question... anyone got pictures of one of Dave's tanks with a hidden hitch installed?

Thanks

chris6499 · 11-23-2010, 01:23 AM

if i ordered a efi tank next week what kind of time frame would i be looking at

**Daveboyd** · 11-24-2010, 04:06 PM

Quote:

Originally Posted by chris6499

if i ordered a efi tank next week what kind of time frame would i be looking at

7-10 business days. I Have 2 NON-EFI tanks on the shelf ready for immediate shipment.

bmfpeterson · 12-15-2010, 06:06 PM

Quote:

Originally Posted by Daveboyd

7-10 business days. I Have 2 NON-EFI tanks on the shelf ready for immediate shipment.

I started at the beginging of this thread...... is the group by long gone or still around?

**Clyde65** · 12-15-2010, 06:16 PM

Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take.

bmfpeterson · 12-16-2010, 01:23 PM

Quote:

Originally Posted by Clyde65

Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take.

well im in for a group buy! so if anyone wants to try and see if we can make this happen let me know.

I need a non efi tank for my 71 short bed.

If it has to happen in march or so Ill wait as well just let me know

**Daveboyd** · 12-16-2010, 04:54 PM

Quote:

Originally Posted by bmfpeterson

well im in for a group buy! so if anyone wants to try and see if we can make this happen let me know.

I need a non efi tank for my 71 short bed.

If it has to happen in march or so Ill wait as well just let me know

I dont plan on doing another untill march. However i do have a NON-EFI bed filler and side filler on the shelf ready to ship.

Sammy · 12-24-2010, 10:45 PM

Subscribed .

legendary · 12-27-2010, 06:28 PM

You have some very nice products, Mr. Boyd - I will definitely consider something for my truck in the near future

6T9GMC · 01-25-2011, 10:31 AM

Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump?

Thanks chris.

68GMCCustom · 01-25-2011, 12:37 PM

to anyone with one of these tanks completely installed, plumbed, etc.....thats "bed fill"....show us some pics of how you did the bed? Is there a door in one of the planks with the filler below...or did you flush mount something in the wood plank?

GCncsuHD · 01-25-2011, 01:38 PM

Dave, has anyone adapted one of these into a 73-87? I might be interested in another EFI tank for my 78 soon.

Edit: NVM I scrolled up to post 332

Any mods to make it fit that frame? I see the mounting brackets are different.

**Daveboyd** · 01-25-2011, 05:40 PM

Quote:

Originally Posted by 6T9GMC

Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump?

Thanks chris.

Chris,

Yes i have a side filler non EFI. Yes it will work with an EFI External pump.

349.00 tank
-10% discount
39.00 shipping to your location

give me a call if you want to get one ordered.

Gobbles · 01-31-2011, 01:45 PM

Hey Dave, what kind price difference is there during the group buy? Is it the 10% you quoted above? I'm interested in a non-efi, 90 degree feeder w/ sending unit. Thanks

Also, my mechanical fuel pump will work fine, correct?

**PGSigns** · 02-08-2011, 07:55 AM

I think this is going to be my next buy for my 65. Measurements look ok but sure would like some pics of one in a 65.
Thanks
Jimmy

**PGSigns** · 02-11-2011, 08:25 PM

Dave
I am ready to get one. So let me know what is in stock or if you need to make one.
Thanks
Jimmy

AJs72K5 · 02-11-2011, 10:24 PM

Quote:

Originally Posted by PGSigns

Dave
I am ready to get one. So let me know what is in stock or if you need to make one.
Thanks
Jimmy

Dave said the next group buy starts in March.... only a couple of weeks away.

**PGSigns** · 02-12-2011, 08:21 PM

I know the group buy is on the way but the truck has the bed off right now and is on the lift while I am doing the disc swap. Now is just the perfect time to do this swap. Gonna call Monday and get one built or on the way.
Jimmy

11-01-2010, 03:29 PM	#328
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave, Have you talked to UPS yet since I spoke with you on the 22nd. I will try and take some pics of what we were discussing so you can have a better idea of what I am talking about. Thanks, Kevin __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

11-07-2010, 04:49 PM	#329
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave can you do a EFI Tank for my 68 Camaro? have you done one for any 1st Gen Camaros? __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140

11-14-2010, 09:12 AM	#330
impalaboy9 Registered User Join Date: Dec 2006 Location: lincoln ne Posts: 57	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, I was wondering if you have built any for a 65 swb stepside. I'm really wanting to get one of your tanks so I can have some stereo where the old tank sits. Anyone on this site have one for a 65?

11-15-2010, 11:45 AM	#331
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Impalaboy, They should work just fine, these should have no problem fitting 63-72 step or fleets. You can thumb through the thread and Dave put some measurements up and you can verify. I will be getting one when they do the next GB in the spring. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

11-19-2010, 03:04 PM	#332
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Here are some pics of our tanks at SEMA. Attached Images __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

11-19-2010, 06:09 PM	#333
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Tanks look great Dave... can't wait to get mine installed. Question... anyone got pictures of one of Dave's tanks with a hidden hitch installed? Thanks

11-23-2010, 01:23 AM	#334
chris6499 Registered User Join Date: Mar 2009 Location: mesa,az Posts: 58	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank if i ordered a efi tank next week what kind of time frame would i be looking at

12-15-2010, 06:16 PM	#337
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-24-2010, 10:45 PM	#340
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Subscribed . __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

12-27-2010, 06:28 PM	#341
legendary Registered User Join Date: Nov 2010 Location: Atlanta, GA Posts: 154	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank You have some very nice products, Mr. Boyd - I will definitely consider something for my truck in the near future __________________ Best Regards, Leon 1970 C/10 LWB Cummins Turbo - Build in Progress Many other toys as well...

01-25-2011, 10:31 AM	#342
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump? Thanks chris.

01-25-2011, 12:37 PM	#343
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank to anyone with one of these tanks completely installed, plumbed, etc.....thats "bed fill"....show us some pics of how you did the bed? Is there a door in one of the planks with the filler below...or did you flush mount something in the wood plank? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-25-2011, 01:38 PM	#344
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, has anyone adapted one of these into a 73-87? I might be interested in another EFI tank for my 78 soon. Edit: NVM I scrolled up to post 332 Any mods to make it fit that frame? I see the mounting brackets are different. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 01-25-2011 at 01:40 PM.

01-31-2011, 01:45 PM	#346
Gobbles Registered User Join Date: Sep 2010 Location: British Columbia Posts: 484	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave, what kind price difference is there during the group buy? Is it the 10% you quoted above? I'm interested in a non-efi, 90 degree feeder w/ sending unit. Thanks Also, my mechanical fuel pump will work fine, correct? __________________ Trevor "You already said spite"

02-08-2011, 07:55 AM	#347
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I think this is going to be my next buy for my 65. Measurements look ok but sure would like some pics of one in a 65. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

02-11-2011, 08:25 PM	#348
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave I am ready to get one. So let me know what is in stock or if you need to make one. Thanks Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

02-12-2011, 08:21 PM	#350
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I know the group buy is on the way but the truck has the bed off right now and is on the lift while I am doing the disc swap. Now is just the perfect time to do this swap. Gonna call Monday and get one built or on the way. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.