New 64 Stepper Project - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88Stanger · 01-07-2021, 11:24 AM

Looking good all these parts...
"Those that do not know how to build a motor say that" now that is funny. I ran chrome for years and now i am doing all powder coated or painted just for change.
But this build is looking good sir.

**pdxhall** · 01-10-2021, 01:56 PM

The parts are looking great. I'll bet you can't wait to get them on your truck.

**The Rocknrod** · 01-10-2021, 03:14 PM

I'm way happy to be starting yes.
I started on the door assembly. Funny thing, I ordered some Flatline Barrier Sound and insulation from Summit. Parts # is FB04, shows a 36" X 12" Piece. So I bought two just in case.
The two boxes came in from their vendor, outside it said FB04 from Flatline. There are 25 pieces in each box.

So I'm on hold until I get it fixed with Summit, don't want them coming back and saying I owe them $900.

Started the Steering column install and wiring though, post a pic after I eat.

**The Rocknrod** · 01-10-2021, 05:32 PM

So here is a good start on the column.

53Sparky · 01-10-2021, 09:18 PM

Shiny & Red is a great look.

If Summit doesn't want any of the extra parts back, I'm pretty sure there are a few people on this forum who'd take it off your hands.

**cwcarpenter98** · 01-10-2021, 10:22 PM

Lookin' great! You got to come back to your truck right as I had to leave mine

**The Rocknrod** · 01-10-2021, 11:01 PM

You bet. The entire time I was gone, thats all I could think of. Kept me going.

**MT65** · 01-10-2021, 11:54 PM

Quote:

Originally Posted by The Rocknrod

I got this engine lift tool. Hopefully it wont bump the firewall when I go to install the engine.

You will love it, have one of the original ones, works fantastic, can’t remember how many engines I have done with it. Once I put in a iron block 555” big block chevy with a tko600 on it, clutch and all in one chunk...in a 70 vette

roll_the_dice · 01-11-2021, 12:08 AM

Looking good...glad to see you home so you can be back at it!

forestb · 01-11-2021, 12:29 PM

wow vary nice

aggie91 · 01-11-2021, 01:42 PM

Wow, that is looking great!

**The Rocknrod** · 01-12-2021, 05:29 AM

So Summit finally got back to me about their vendor sending me too much sound deadner/heat shield. Seems they (the vendor) will be sending me the correct stuff and a UPS will call to send out the boxes of incorrectly sent items.
Slows my whole door process down quite a bit. Once the glass goes in can't get in the sound deadner.
And my door mirror, the three fastener holes are 5/6"-18 not 1/4"-20 that was sent with the mirror, another slow down. I ordered three stainless ones from the bolt depot, so I'll be polishing those when they get in.
Guess it's time to call Extreme Automatics for my transmission and Blueprint Engines for the engine.

**Joe Pass** · 01-12-2021, 09:27 AM

Looks amazing....

**The Rocknrod** · 01-26-2021, 06:04 PM

Got the engine in I ordered at Summit.

forestb · 01-26-2021, 06:45 PM

Quote:

Originally Posted by The Rocknrod

Got the engine in I ordered at Summit.

OOOOO what is is.

**The Rocknrod** · 01-26-2021, 07:03 PM

A 350 by Blueprint Engines.

forestb · 01-26-2021, 07:07 PM

If you don't mind me asking. Why a 350 as apposed to a 383 stroker or something like that?

**The Rocknrod** · 01-26-2021, 07:14 PM

I never gave any thought. I know 350's and hear mixed issues on 383's and I don't want any issues on the big guys truck. The BluePrint BP3503CT1 has more than enough horse power to get me where I want to go. I'm not into breaking things anymore.

**The Rocknrod** · 02-05-2021, 06:42 AM

Transmission came in from Extreme Transmissions.

**Joe Pass** · 02-05-2021, 12:08 PM

Very nice.....

88Stanger · 02-06-2021, 11:27 AM

Quote:

Originally Posted by The Rocknrod

I never gave any thought. I know 350's and hear mixed issues on 383's and I don't want any issues on the big guys truck. The BluePrint BP3503CT1 has more than enough horse power to get me where I want to go. I'm not into breaking things anymore.

I have run many a 350, few 327's, a 283, LS and now i am onto a 383 Full roller motor that is not tame, but i must agree with you that with the good ole 350 from Blueprint, you know what you got, that it will run and should be flawless. Me with this crazy 383.. ya that is another thought. Everything must be upgraded (well maybe not "must be" but with me it must...lol) and as you get more and more fancy you can get into issues down the road.
Happy you got this motor, it is enough to get you down the road and could get you into trouble, so I always say that this would be enough.... LOL

**The Rocknrod** · 02-06-2021, 01:40 PM

Quote:

Originally Posted by Joe Pass

Very nice.....

Thanks Joe, hope to keep up with you.

Quote:

Originally Posted by 88Stanger

I have run many a 350, few 327's, a 283, LS and now i am onto a 383 Full roller motor that is not tame, but i must agree with you that with the good ole 350 from Blueprint, you know what you got, that it will run and should be flawless. Me with this crazy 383.. ya that is another thought. Everything must be upgraded (well maybe not "must be" but with me it must...lol) and as you get more and more fancy you can get into issues down the road.
Happy you got this motor, it is enough to get you down the road and could get you into trouble, so I always say that this would be enough.... LOL

Thanks 88Stanger.

SCOTI · 02-06-2021, 04:25 PM

Motor/trans already looking better after landing in your hands...

**The Rocknrod** · 02-06-2021, 06:48 PM

Speaking of hands, ow.
Installed all by myself.

88Stanger · 02-07-2021, 11:40 AM

Quote:

Originally Posted by The Rocknrod

Speaking of hands, ow.
Installed all by myself.

Looking great Sir!! It will be awesome.

01-07-2021, 11:24 AM	#326
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: New 64 Stepper Project Looking good all these parts... "Those that do not know how to build a motor say that" now that is funny. I ran chrome for years and now i am doing all powder coated or painted just for change. But this build is looking good sir. __________________ John 3:16 - Saved me... God Bless

01-10-2021, 01:56 PM	#327
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: New 64 Stepper Project The parts are looking great. I'll bet you can't wait to get them on your truck. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.

01-10-2021, 03:14 PM	#328
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I'm way happy to be starting yes. I started on the door assembly. Funny thing, I ordered some Flatline Barrier Sound and insulation from Summit. Parts # is FB04, shows a 36" X 12" Piece. So I bought two just in case. The two boxes came in from their vendor, outside it said FB04 from Flatline. There are 25 pieces in each box. So I'm on hold until I get it fixed with Summit, don't want them coming back and saying I owe them $900. Started the Steering column install and wiring though, post a pic after I eat. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-10-2021, 05:32 PM	#329
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So here is a good start on the column. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-10-2021, 09:18 PM	#330
53Sparky Registered User Join Date: Nov 2013 Location: Northglenn, Colorado Posts: 186	Re: New 64 Stepper Project Shiny & Red is a great look. If Summit doesn't want any of the extra parts back, I'm pretty sure there are a few people on this forum who'd take it off your hands. __________________ We'll burn that bridge when we get there My current project: Rust Therapy 62 C10 Numbers 6:24-26

01-10-2021, 10:22 PM	#331
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: New 64 Stepper Project Lookin' great! You got to come back to your truck right as I had to leave mine __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

01-10-2021, 11:01 PM	#332
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project You bet. The entire time I was gone, thats all I could think of. Kept me going. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-11-2021, 12:08 AM	#334
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Looking good...glad to see you home so you can be back at it! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

01-11-2021, 12:29 PM	#335
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: New 64 Stepper Project wow vary nice

01-11-2021, 01:42 PM	#336
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: New 64 Stepper Project Wow, that is looking great! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-12-2021, 05:29 AM	#337
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So Summit finally got back to me about their vendor sending me too much sound deadner/heat shield. Seems they (the vendor) will be sending me the correct stuff and a UPS will call to send out the boxes of incorrectly sent items. Slows my whole door process down quite a bit. Once the glass goes in can't get in the sound deadner. And my door mirror, the three fastener holes are 5/6"-18 not 1/4"-20 that was sent with the mirror, another slow down. I ordered three stainless ones from the bolt depot, so I'll be polishing those when they get in. Guess it's time to call Extreme Automatics for my transmission and Blueprint Engines for the engine. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 01-12-2021 at 05:36 AM.

01-12-2021, 09:27 AM	#338
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Looks amazing.... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

01-26-2021, 06:04 PM	#339
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the engine in I ordered at Summit. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-26-2021, 07:03 PM	#341
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project A 350 by Blueprint Engines. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-26-2021, 07:07 PM	#342
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: New 64 Stepper Project If you don't mind me asking. Why a 350 as apposed to a 383 stroker or something like that?



Register or Log In To remove these advertisements.

01-26-2021, 07:14 PM	#343
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I never gave any thought. I know 350's and hear mixed issues on 383's and I don't want any issues on the big guys truck. The BluePrint BP3503CT1 has more than enough horse power to get me where I want to go. I'm not into breaking things anymore. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-05-2021, 06:42 AM	#344
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Transmission came in from Extreme Transmissions. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-05-2021, 12:08 PM	#345
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Very nice..... __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

02-06-2021, 04:25 PM	#348
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: New 64 Stepper Project Motor/trans already looking better after landing in your hands... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-06-2021, 06:48 PM	#349
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Speaking of hands, ow. Installed all by myself. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 02-06-2021 at 06:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.