What did you do to your truck today? Chapter II - Page 143 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matthamby · 04-19-2016, 09:46 AM

OK, got some photos of my $200 replacement bed, you can follow my link here;

http://67-72chevytrucks.com/vboard/s...=1#post7565792

Thanks for looking!

Ft.ValloniaStreaker · 04-20-2016, 06:17 AM

I'm sure not everybody is a fan of this look but I like the way the pipes turned out.

Coley · 04-20-2016, 08:36 AM

Quote:

Originally Posted by Ft.ValloniaStreaker

I'm sure not everybody is a fan of this look but I like the way the pipes turned out.

That may not be what I would necessarily do...but I like it. It shows some ingenuity and personal preference....always a good thing.
Its good to be different...nice job!

All Good
Coley

Lanman1972 · 04-20-2016, 08:39 AM

I like it, how does it Sound?

Ft.ValloniaStreaker · 04-20-2016, 08:54 AM

Thanks Coley, and it sounds a LOT quieter than the original idea......

JG67 · 04-20-2016, 09:16 AM

Quote:

Originally Posted by Ft.ValloniaStreaker

Thanks Coley, and it sounds a LOT quieter than the original idea......

Cool old school mod.

JG67 · 04-20-2016, 09:25 AM

The big brown truck dropped off a set of 5 lug replacement axles for my 67! Yeah buddy

**chevy2tom** · 04-20-2016, 10:42 AM

Quote:

Originally Posted by Ft.ValloniaStreaker

Thanks Coley, and it sounds a LOT quieter than the original idea......

I'm thinking about doing the same thing (through the fender) off of a cutout

Ekliptix · 04-20-2016, 10:44 AM

Installed new shocks on my Dad's 71 big block.
Took my 72 out from winter hibernation and washed it.

**chevy2tom** · 04-20-2016, 10:44 AM

Homemade side pipes , love it

Ft.ValloniaStreaker · 04-20-2016, 12:17 PM

Quote:

Originally Posted by chevy2tom

I'm thinking about doing the same thing (through the fender) off of a cutout

I'm running a big block, the passenger side was a breeze, the drivers, well....I thought about cutouts and tail pipes, but the cab floor is hot enough as it is.

Possmguts · 04-23-2016, 09:44 AM

Quote:

Originally Posted by gangforward

3" Exhaust Install - Future SuperCharger....

Im wondering if you realized the dust storm you are going to have everywhere you go now? There was times I thought my truck was on fire when I had turn downs....

OregonNed · 04-23-2016, 11:22 AM

That's a great color of green!

Redline novdog · 04-23-2016, 06:04 PM

Quote:

Originally Posted by Possmguts

Aside from some block sanding (along with the rest of the truck) I finally wrapped this hood up... so glad that's behind me....

YA... You have probably started a 67-72 trend!!!!! 'tis the season

vidman · 04-23-2016, 06:09 PM

Started to cut my dash harness for my new gauge cluster and my first attempt at Phosphate coating. the striker plates and bolts came out great but i guess i didn,t clean the shims enough. going to try some more things on sunday

Possmguts · 04-23-2016, 07:08 PM

Quote:

Originally Posted by Redline novdog

YA... You have probably started a 67-72 trend!!!!! 'tis the season

lol.. thanks.. I hope the next guy has an easier time with it than I did

JWSmith · 04-23-2016, 10:25 PM

got the bed and cab all sanded and primer, doors hung and aligned - we are ready to lay down some paint

gangforward · 04-23-2016, 10:43 PM

Quote:

Originally Posted by Possmguts

Im wondering if you realized the dust storm you are going to have everywhere you go now? There was times I thought my truck was on fire when I had turn downs....

Pure Toy - future trips to the dragstrip. Doesn't get out in the dirt much anymore. After suspension, rear end, brakes work is done, going to add a supercharger.

gottattooz · 04-23-2016, 10:54 PM

Today on the way home from work, I recessed the grille and lowered the passenger headlight a little with the help of some friends I made in a Hyundai. Also I vented my aluminum radiator, trans cooler and engine oil cooler with the water pump pulley.

- Josh

palallin · 04-23-2016, 11:03 PM

Quote:

Originally Posted by palallin

I broke it.

On the way home from work, I heard a hissing sound, and soon the power steering wasn't. Popped the hood to find the expected spray of fluid in the front left corner. I man-handled him home, and now I have to refill the pump to see where the leak is. I *think* its a hose and *hope-and-pray* it's not the box.

Well, I pulled the steel part of the low-pressure line off to find the hole in it caused by rubbing against the inner fender. Next step: find a replacement for the steel part of the hose or have one made.

**71CHEVYSHORTBED402** · 04-23-2016, 11:05 PM

Sweet mod........That's a bummer. How's the frame?

I only built shelves above the garage door, for the cowl and an NOS inner grille I couldn't pass up.

Metaldoc · 04-23-2016, 11:21 PM

Quote:

Originally Posted by gottattooz

Today on the way home from work, I recessed the grille and lowered the passenger headlight a little with the help of some friends I made in a Hyundai. Also I vented my aluminum radiator, trans cooler and engine oil cooler with the water pump pulley.

- Josh

Ah man that sucks But it's just steel , it can be repaired as long as all is where ok.

firedemon · 04-24-2016, 12:01 AM

Quote:

Originally Posted by gottattooz

Today on the way home from work, I recessed the grille and lowered the passenger headlight a little with the help of some friends I made in a Hyundai. Also I vented my aluminum radiator, trans cooler and engine oil cooler with the water pump pulley.

- Josh

that _ _ _ _ _ man hope you are ok and insurance covers it

Dimebagdavesc30 · 04-24-2016, 12:06 AM

I got the bed on and the bed lights mostly working.

kilrcady · 04-24-2016, 07:14 AM

Quote:

Originally Posted by gottattooz

Today on the way home from work, I recessed the grille and lowered the passenger headlight a little with the help of some friends I made in a Hyundai. Also I vented my aluminum radiator, trans cooler and engine oil cooler with the water pump pulley.

- Josh

That sucks

04-19-2016, 09:46 AM	#3551
matthamby Registered User Join Date: May 2015 Location: Walnut Cove, NC Posts: 109	Re: What did you do to your truck today? Chapter II OK, got some photos of my $200 replacement bed, you can follow my link here; http://67-72chevytrucks.com/vboard/s...=1#post7565792 Thanks for looking!

04-20-2016, 06:17 AM	#3552
Ft.ValloniaStreaker Registered User Join Date: Jul 2013 Location: Southern Indiana Posts: 160	Re: What did you do to your truck today? Chapter II I'm sure not everybody is a fan of this look but I like the way the pipes turned out. Attached Images

04-20-2016, 08:39 AM	#3554
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: What did you do to your truck today? Chapter II I like it, how does it Sound?

04-20-2016, 08:54 AM	#3555
Ft.ValloniaStreaker Registered User Join Date: Jul 2013 Location: Southern Indiana Posts: 160	Re: What did you do to your truck today? Chapter II Thanks Coley, and it sounds a LOT quieter than the original idea...... Attached Images

04-20-2016, 09:25 AM	#3557
JG67 Registered User Join Date: Dec 2013 Location: Phoenix Posts: 87	Re: What did you do to your truck today? Chapter II The big brown truck dropped off a set of 5 lug replacement axles for my 67! Yeah buddy

04-20-2016, 10:44 AM	#3559
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 683	Re: What did you do to your truck today? Chapter II Installed new shocks on my Dad's 71 big block. Took my 72 out from winter hibernation and washed it. Attached Images

04-20-2016, 10:44 AM	#3560
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: What did you do to your truck today? Chapter II Homemade side pipes , love it

04-23-2016, 11:22 AM	#3563
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II That's a great color of green! __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

04-23-2016, 06:09 PM	#3565
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II Started to cut my dash harness for my new gauge cluster and my first attempt at Phosphate coating. the striker plates and bolts came out great but i guess i didn,t clean the shims enough. going to try some more things on sunday Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

04-23-2016, 10:25 PM	#3567
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: What did you do to your truck today? Chapter II got the bed and cab all sanded and primer, doors hung and aligned - we are ready to lay down some paint

04-23-2016, 10:54 PM	#3569
gottattooz Registered User Join Date: Apr 2008 Location: Hampton, Ga Posts: 919	Re: What did you do to your truck today? Chapter II Today on the way home from work, I recessed the grille and lowered the passenger headlight a little with the help of some friends I made in a Hyundai. Also I vented my aluminum radiator, trans cooler and engine oil cooler with the water pump pulley. - Josh Attached Images __________________ 1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R

04-23-2016, 11:05 PM	#3571
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,325	Re: What did you do to your truck today? Chapter II Sweet mod........That's a bummer. How's the frame? I only built shelves above the garage door, for the cowl and an NOS inner grille I couldn't pass up. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-24-2016, 12:06 AM	#3574
Dimebagdavesc30 Registered User Join Date: Feb 2016 Location: Moline, ill Posts: 62	Re: What did you do to your truck today? Chapter II I got the bed on and the bed lights mostly working. __________________ 72 C30 283 flatbed 66 silver eagle bus

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.