67 cheby's Dropmember build thread (CLOUD 9) - Page 144 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 03-21-2012, 09:47 AM

Quote:

Originally Posted by FrankieD

Looks nice. Will you have to trim the inner panel for suspension clearance?

are you referring to the Square body tubz ? If so these are just the "PLUGS" that the mold is built off of and i just left the whole factory fender together in 1 piece for support (this way all of the factory bolt holes stay lined up ) while they are building the mold, when they are produced none of that underneath will be in there ! does that make sense ?

smbrouss70 · 03-21-2012, 10:30 AM

Quote:

Originally Posted by 67cheby

No I will have custom hoses made, look up ES67 build thread he ran his this way SUPER CLEAN !!
Posted via Mobile Device

With the slosh tubz in place is there enough room in the fender to run the A/C lines?

**67cheby** · 03-21-2012, 10:38 AM

yes there is still room to run them over the top !

smbrouss70 · 03-21-2012, 10:44 AM

Good to know!

**67cheby** · 03-21-2012, 10:53 AM

Quote:

Originally Posted by smbrouss70

Good to know!

I have a set ready to ship ....just sayin !! LOL

**67cheby** · 03-21-2012, 10:54 AM

Quote:

Originally Posted by longbed67

Does vintage air provide enough hose to do this??? I am very curious to see how this will work!

http://67-72chevytrucks.com/vboard/s...330869&page=19 this is a link to Erics build look around pages 15-20 alot of his ac install there, he did a very nice clean job

smbrouss70 · 03-21-2012, 11:01 AM

Quote:

Originally Posted by 67cheby

I have a set ready to ship ....just sayin !! LOL

I had the money and was getting ready to pull the trigger, but I figured out that my driveshaft isn't going to work anymore this weekend, so I have to order one of those first. Soon though...

**67cheby** · 03-21-2012, 11:29 AM

dang...driveshaft !! LOL

smbrouss70 · 03-21-2012, 11:38 AM

Yeah, who needs that?... the truck is just garage art anyway.

FrankieD · 03-21-2012, 11:44 AM

Quote:

Originally Posted by 67cheby

are you referring to the Square body tubz ? If so these are just the "PLUGS" that the mold is built off of and i just left the whole factory fender together in 1 piece for support (this way all of the factory bolt holes stay lined up ) while they are building the mold, when they are produced none of that underneath will be in there ! does that make sense ?

Gotcha thought that was the finished deal

**67cheby** · 03-21-2012, 11:44 AM

no one can see the driveline in your garage, everyone could see the TUBZ....

smbrouss70 · 03-21-2012, 12:54 PM

RustenPaines · 03-21-2012, 02:56 PM

* When you put your truck in park the hood should unlatch and open up. Then shut when the key is turned on. * Nice idea for your drop member cover too!

watahyahknow · 03-21-2012, 04:05 PM

looks like there going faster on making the moulds on those ........ maibe they seen the light after they notice their checkbook filled up and orders came in after making the first type

**67cheby** · 03-21-2012, 04:35 PM

LOL, hopefully they have figured out that i really want to do this !

laid67 · 03-22-2012, 03:36 AM

looks good, definitely like the idea of the filler panel with that bead rolled in it. its gonna look nice

**67cheby** · 03-22-2012, 10:40 AM

thanks man , hopefully tomorrow night i will get to weld it in, i have spent the last few nights this week smoothing a buddy of mines firewall in his 68 firebird

es67chevy · 03-22-2012, 09:58 PM

Quote:

Originally Posted by 67cheby

No I will have custom hoses made, look up ES67 build thread he ran his this way SUPER CLEAN !!
Posted via Mobile Device

Thanks for the props!

**67cheby** · 03-22-2012, 09:59 PM

Well deserved
Posted via Mobile Device

longbed67 · 03-23-2012, 11:56 AM

For sure! ES67's engine bay looks stellar!
I cant wait to see how your's finally turns out!

es67chevy · 03-23-2012, 01:03 PM

Quote:

Originally Posted by longbed67

For sure! ES67's engine bay looks stellar!
I cant wait to see how your's finally turns out!

thanks, Adam!

And yes, I want to see his finished too, as long as its not at any shows I go to with my truck. No one will look at mine.

**67cheby** · 03-23-2012, 01:21 PM

hmmmmm....maybe we can convince you to go ahead and lay it out ERIC !!

es67chevy · 03-23-2012, 01:27 PM

yeah, its only money, right? So if I could just find a sponsor.....

**67cheby** · 03-23-2012, 01:39 PM

LOL....you already have a sponsor ! Now just make a quick call to Porterbuilt, i know a guy that can hook you up with some SLOSH TUBZ.....oh and Accuair.....in my head that only totals up to about $8000 ......lets get her laid out !!

jtp67-72 · 03-23-2012, 06:28 PM

Quote:

Originally Posted by es67chevy

yeah, its only money, right? So if I could just find a sponsor.....

One of the 1st threads I got hooked on was Mikes and then yours ---trying to decide to layout or not...............8k + and I'm still here watchin both of ya!! Be caught up 1 day.........lol............jim

03-21-2012, 10:38 AM	#3578
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread yes there is still room to run them over the top ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-21-2012, 10:44 AM	#3579
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 67 cheby's Dropmember build thread Good to know! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-21-2012, 11:29 AM	#3583
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread dang...driveshaft !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-21-2012, 11:38 AM	#3584
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 67 cheby's Dropmember build thread Yeah, who needs that?... the truck is just garage art anyway. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-21-2012, 11:44 AM	#3586
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread no one can see the driveline in your garage, everyone could see the TUBZ.... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-21-2012, 12:54 PM	#3587
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 67 cheby's Dropmember build thread __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-21-2012, 02:56 PM	#3588
RustenPaines Registered User Join Date: Sep 2008 Location: Portland, Oregon Posts: 286	Re: 67 cheby's Dropmember build thread * When you put your truck in park the hood should unlatch and open up. Then shut when the key is turned on. * Nice idea for your drop member cover too! __________________ 69 C10 "Torchered" RC Crawler Nut http://www.dorkstarproductions.com/orcrc.com/forum/

03-21-2012, 04:05 PM	#3589
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread looks like there going faster on making the moulds on those ........ maibe they seen the light after they notice their checkbook filled up and orders came in after making the first type __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-21-2012, 04:35 PM	#3590
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread LOL, hopefully they have figured out that i really want to do this ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-22-2012, 03:36 AM	#3591
laid67 Registered User Join Date: Oct 2011 Location: Rosamond, CA Posts: 94	Re: 67 cheby's Dropmember build thread looks good, definitely like the idea of the filler panel with that bead rolled in it. its gonna look nice

03-22-2012, 10:40 AM	#3592
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread thanks man , hopefully tomorrow night i will get to weld it in, i have spent the last few nights this week smoothing a buddy of mines firewall in his 68 firebird __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-22-2012, 09:59 PM	#3594
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread Well deserved Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-23-2012, 11:56 AM	#3595
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 67 cheby's Dropmember build thread For sure! ES67's engine bay looks stellar! I cant wait to see how your's finally turns out! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-23-2012, 01:21 PM	#3597
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread hmmmmm....maybe we can convince you to go ahead and lay it out ERIC !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-23-2012, 01:27 PM	#3598
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: 67 cheby's Dropmember build thread yeah, its only money, right? So if I could just find a sponsor..... __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869



Register or Log In To remove these advertisements.

03-23-2012, 01:39 PM	#3599
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread LOL....you already have a sponsor ! Now just make a quick call to Porterbuilt, i know a guy that can hook you up with some SLOSH TUBZ.....oh and Accuair.....in my head that only totals up to about $8000 ......lets get her laid out !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.