What did you do to your truck today! - Page 145 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72cummins · 03-10-2012, 07:34 PM

Istalled front and rear firestone air helper springs.

Bennett68C10 · 03-10-2012, 07:44 PM

Quote:

Originally Posted by dhaymaker

Tried to get my camera's video capability to pick up the sound of the truck. Apparently there was some serious tonal distortion and the sound was not good at all. Tested my phone to see if it would work and it was marginally better. So, let's see if I can embed the little clip I made yesterday.

Here's the sound from the headers, 3-inch pipe, and SpinTechs...

SpinTech w/3 inch exhaust - YouTube

After hearing the recorded sound of my truck, it helped put the AustinScott videos in better perspective. My truck does have a good tone, maybe it's just my ears!! lol

Sounds awesome dhaymaker, I have a set of Spintech Super Pro Streets on mine behind a BBC. Still haven't fired it yet so I don't know what it sounds like. I'm hoping it sounds as good as yours.

**Bob B.** · 03-10-2012, 10:59 PM

What did I do to my '67 today? Filled the tank up and drove it down the coast!

**67cheby** · 03-10-2012, 11:06 PM

Motor looks sick
Posted via Mobile Device

fatgump · 03-11-2012, 12:24 AM

Hopefully the final install of the motor.

KY Colonel · 03-11-2012, 03:27 AM

Quote:

Originally Posted by bcubed

Added a side post battery quick disconnect to the bagged silverado so I could disconnect the battery when it sat for a while

I've been thinking of doing the same. You happy with it? You can take the knob for added security too right?
Posted via Mobile Device

KY Colonel · 03-11-2012, 04:21 AM

I took off my grill for paint-success
I installed a new turn signal lever-success
Installed new wood steering wheel-failed (again)
Installed clear turn signal/parking lenses-success (real happy with the kit from LMC for $20, 2 lenses gaskets and amber bulbs)

Posted via Mobile Device
Posted via Mobile Device

wrwelton · 03-11-2012, 07:44 AM

Yesterday the the brake and clutch pedals went in. Clutch is hooked up and adjusted. Windshield washer hoses and sprayers installed. Emergency brake cable attached and conected. Power steering hoses connected. Today the carburetor is going on and start wiring the engine harness. It feels good, my goal is to have truck on the road by April 15th.
I had to turn the dipstick because it was in the way of the clutch linkage. That wasn't fun.

Delo69 · 03-11-2012, 06:01 PM

Drove her around and returned some movies then brought her home and cleaned her and threw a coat of wax on her.

mud.man.rj · 03-11-2012, 07:58 PM

Very nice extremely clean truck, kind of nice to see a truck that isn't altered to much, not so common anymore is it, she's a looker.

Indyuke · 03-11-2012, 08:11 PM

Clean truck, Delo69. Where'd you get the hubcaps?

mud.man.rj · 03-11-2012, 08:46 PM

Cut my dash panel up a bit and fit Autometer Gauges in and a 3 pod on the dash bottom. Dash is gas/speedo and Tach.

A nd had last drive today, sold tires/rims today and bought new doors so off to body work/paint then new rims Mt Classic11 rims and Pitbull Rocker tires. Off the road for a while.

big_al_71 · 03-11-2012, 10:12 PM

drove it all day today and stopped by my buddies house..

mud.man.rj · 03-11-2012, 10:16 PM

Hey big al 71, what kind of box cover do you have, name brand and where from, looks good.

Pont406 · 03-11-2012, 10:29 PM

Got some gas before it gets to $5 and burned a little rubber...

Horsman · 03-11-2012, 10:34 PM

Installed freshly restored brake booster and master cylinder. Installed vintage air compressor and engine wire harness.

Delo69 · 03-12-2012, 01:01 AM

Quote:

Originally Posted by Indyuke

Clean truck, Delo69. Where'd you get the hubcaps?

Got the hubcaps off ebay..they started off as S10 hubcaps that were black..I stripped the paint off them and repainted them white with blue bowtie to match the truck.

mud.man.rj
Thanks I wanna try keep her as original as I can with some updates..going to freshin up the interior next the PO cut up the dash pretty good but I got an idea to fix..

PAWS 72 · 03-12-2012, 02:11 AM

Quote:

Originally Posted by longbed67

Got my engine mocked up to make sure all the parts will fit... looks like i will have to do a little trimming to allow clearance for the bolts.

I bet she will be wicked. Nice looking motor

longbed67 · 03-12-2012, 07:08 AM

Thanks Paws_72! Now just to find the time to finish her before summer!

dliving69 · 03-12-2012, 11:40 AM

Quote:

Originally Posted by Delo69

Drove her around and returned some movies then brought her home and cleaned her and threw a coat of wax on her.

NICE TRUCK! beleived we talked on Facebook page already, because I have 69 c10 that is ur twin just I have the white bumpers and top and bottom trim. This summer I am going with white steelies like you got. Looks awesome. What size rubber you running?

**RenoKeene** · 03-12-2012, 12:04 PM

Installed my 72 throttle cable and pedal adaptor, now I need to find a shorter cable or shorten this one about 1/2"....it works good I just want to take some of the tension off of it.

1quik70 · 03-12-2012, 02:16 PM

A small change from my normal, "Jumped in and drove it to work this morning!". In the process of replacing the old worn out 454, with a newer less worn out 454. Should have been finished Saturday but, being an idiot I lost the bell housing bolts out of the donor truck, and had to wait until today to get more!

**67cheby** · 03-12-2012, 03:11 PM

beautiful work

shawno72 · 03-12-2012, 04:15 PM

Picked this up to go in the 68, an original 327. Needs a cleaning but I have a set of fuelie heads ready to go.
Name: 2327.jpg
Views: 495
Size: 65.2 KB

LakeAnna · 03-12-2012, 05:52 PM

trizact 1500-3000 and buff...

03-10-2012, 07:34 PM	#3601
72cummins Registered User Join Date: Oct 2011 Location: Great Falls, MT Posts: 15	Re: What did you do to your truck today! Istalled front and rear firestone air helper springs. Attached Images __________________ Bryce 1972 Chevy K20 powered by an inline 6

03-10-2012, 10:59 PM	#3603
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,369	Re: What did you do to your truck today! What did I do to my '67 today? Filled the tank up and drove it down the coast! __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

03-10-2012, 11:06 PM	#3604
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: What did you do to your truck today! Motor looks sick Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-11-2012, 12:24 AM	#3605
fatgump Registered User Join Date: Apr 2011 Location: Arizona Posts: 249	Re: What did you do to your truck today! Hopefully the final install of the motor. Attached Images

03-11-2012, 04:21 AM	#3607
KY Colonel Registered User Join Date: Oct 2011 Location: Georgetown, KY Posts: 45	Re: What did you do to your truck today! I took off my grill for paint-success I installed a new turn signal lever-success Installed new wood steering wheel-failed (again) Installed clear turn signal/parking lenses-success (real happy with the kit from LMC for $20, 2 lenses gaskets and amber bulbs) Posted via Mobile Device Posted via Mobile Device __________________ 1970 K20 Custom 427/TH400/PS/PB and a dash of badass! I was made in America, my truck was too...4 years before me.

03-11-2012, 07:44 AM	#3608
wrwelton Registered User Join Date: Mar 2006 Location: massachusetts Posts: 180	Re: What did you do to your truck today! Yesterday the the brake and clutch pedals went in. Clutch is hooked up and adjusted. Windshield washer hoses and sprayers installed. Emergency brake cable attached and conected. Power steering hoses connected. Today the carburetor is going on and start wiring the engine harness. It feels good, my goal is to have truck on the road by April 15th. I had to turn the dipstick because it was in the way of the clutch linkage. That wasn't fun. Attached Images __________________ I know I can! I know i can! 72 K20 Restoration

03-11-2012, 06:01 PM	#3609
Delo69 Registered User Join Date: May 2010 Location: Memphis, TN Posts: 62	Re: What did you do to your truck today! Drove her around and returned some movies then brought her home and cleaned her and threw a coat of wax on her. Attached Images __________________ _____________________________________ Dennis 1969 C10 250 w/3 on the tree - project/weekend warrior 2010 Subaru Impreza - daily driver

03-11-2012, 07:58 PM	#3610
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Very nice extremely clean truck, kind of nice to see a truck that isn't altered to much, not so common anymore is it, she's a looker.

03-11-2012, 08:11 PM	#3611
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: What did you do to your truck today! Clean truck, Delo69. Where'd you get the hubcaps?

03-11-2012, 08:46 PM	#3612
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Cut my dash panel up a bit and fit Autometer Gauges in and a 3 pod on the dash bottom. Dash is gas/speedo and Tach. A nd had last drive today, sold tires/rims today and bought new doors so off to body work/paint then new rims Mt Classic11 rims and Pitbull Rocker tires. Off the road for a while.

03-11-2012, 10:12 PM	#3613
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: What did you do to your truck today! drove it all day today and stopped by my buddies house.. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-11-2012, 10:16 PM	#3614
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Hey big al 71, what kind of box cover do you have, name brand and where from, looks good.

03-11-2012, 10:29 PM	#3615
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: What did you do to your truck today! Got some gas before it gets to $5 and burned a little rubber... Attached Images

03-11-2012, 10:34 PM	#3616
Horsman Registered User Join Date: Feb 2011 Location: North Texas Posts: 118	Re: What did you do to your truck today! Installed freshly restored brake booster and master cylinder. Installed vintage air compressor and engine wire harness. Attached Images __________________ Jeff Horsman 1972 C20 Highlander "C" 1966 Olds 442 L69 four speed 1971 Skylark (GS clone racecar) 494 stroker 1986 Buick T-Type

03-12-2012, 07:08 AM	#3619
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: What did you do to your truck today! Thanks Paws_72! Now just to find the time to finish her before summer! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706



Register or Log In To remove these advertisements.

03-12-2012, 12:04 PM	#3621
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,029	Re: What did you do to your truck today! Installed my 72 throttle cable and pedal adaptor, now I need to find a shorter cable or shorten this one about 1/2"....it works good I just want to take some of the tension off of it. Attached Images __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

03-12-2012, 02:16 PM	#3622
1quik70 Registered User Join Date: Apr 2010 Location: Jeffersonville, Indiana Posts: 136	Re: What did you do to your truck today! A small change from my normal, "Jumped in and drove it to work this morning!". In the process of replacing the old worn out 454, with a newer less worn out 454. Should have been finished Saturday but, being an idiot I lost the bell housing bolts out of the donor truck, and had to wait until today to get more!

03-12-2012, 03:11 PM	#3623
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: What did you do to your truck today! beautiful work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-12-2012, 04:15 PM	#3624
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: What did you do to your truck today! Picked this up to go in the 68, an original 327. Needs a cleaning but I have a set of fuelie heads ready to go. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-12-2012, 05:52 PM	#3625
LakeAnna Registered User Join Date: Oct 2011 Location: Virginia Posts: 599	Re: What did you do to your truck today! trizact 1500-3000 and buff... Attached Images __________________ Chris *72 RESTO* http://67-72chevytrucks.com/vboard/s...d.php?t=501870

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.