AL GIANT 60-66 parts Stash Barn Find!!

[gottosurf]

Is this post still active? There has not been a reply in a while from what I can tell.

[Nils]

Originally Posted by GMCNUT

Per the rules ... parts and prices need to be posted. Thanks

Well, every now and again a guy just gets plain lucky. Myself and another board member (sweptline) were out scavenging for truck parts and stumbled across a guy who had 6 or 7 60-66 parts trucks in a fenced area with all kinds of grilles, steering colums, beds, doors etc all around them so we stopped and asked and it turned out he also had a whole building full of loose 60-66 stuff too. We saw a lot of stuff in this "barn find stash" that we both needed for our 3 or 4 project trucks and luck was with us because this guy really wanted to move all of it and totally get out of fooling with old trucks altogether, so we struck a deal and bought him completely out.

We are still hauling everything from his place to ours and do not have pictures of all the parts trucks, no even 1/3 of the parts we bought, but I uploaded the first 200 pictures covering what we have identified so far and you can see everything in my Webshots album by copying and pasting this link: http://rides.webshots.com/album/5824...ides&start=108

Basically it looks like we have at least 1 of every conceivable part to fit a 60-66 truck - I know there are 2 factory automatic columns, factory power steering and 4 near perfect hoods worth 200.00 each easy - there are doors fenders grilles - everything. I HIGHLY RECOMMEND if you are ANYWHERE near Alabama that you strongly consider driving in and looking at all this stuff and maybe taking a parts / project truck home with you too. I will post specific details on each truck in case someone wants to buy a parts truck - everything else is loose parts for sale. If you do not see it in my initial pics, I assure you we have it - inquire - Thank you guys and sorry for so many pictures but I had to show all the angles to each truck so there are a lot to look through.....thanks! GMCNUT and Sweptline

Hi,
I need a Mount for my wiper Motor like this. Do you have some one like this ???

Thank you verry much.

Greetings

Nils

[Oldgmc1963]

Hi and thank you in advance for fielding this. I am looking for what I believe is called a Parking brake cable clamp. It's bolted (two bolts) to the rear brake back plate were the parking brake cable goes into the back plate.

[Cypher]

I need the bed trim on the shortbed

[208SS]

Do you by chance still have the chrome stepside rear bumper and brackets for sale? Thanks

[sharkskinman]

Picture link doesn't go anywhere
Still have parts??

[earl84]

Do you have any windshield washer squirter assemblies, for both driver and passenger sides? I would take them, pending price.

[GMCNUT]

Originally Posted by earl84

Do you have any windshield washer squirter assemblies, for both driver and passenger sides? I would take them, pending price.

When you say "assemblies" do you literally mean just the actual metal squirter heads themselves that screw to the cowl and attach to the fluid hoses? I probably do have these somewhere but to be honest, you might be best to buy aftermarket ones because they will be cleaner and work better. I can look for you though

[GMCNUT]

Originally Posted by sharkskinman

Picture link doesn't go anywhere
Still have parts??

Do still have parts Shark - let me know what you need. I am about to get cranked back up posting and selling stuff again

[GMCNUT]

Originally Posted by 208SS

Do you by chance still have the chrome stepside rear bumper and brackets for sale? Thanks

I don't know if you are still looking or not, but I do incidentally have a super nice original low mileage chrome 1963-66 stepside rear bumper and brackets. Let me know if you are still looking

[GMCNUT]

Originally Posted by Cypher

I need the bed trim on the shortbed

Cypher, I have a nice nice set on a short fleet bed I could remove and send you if I can find what I did with the other set I have - or sell you that set for that matter - one set was typically faded out and one set was more chrome-like and shinier so I was going to swap the less shiny set out for the shinier set and sell the more dull looking set. Let me know if you are still looking and if so I'll go dig up that other set and compare to mine to see if I want to mess with swapping or just leave the set I have as it is.....

[sharkskinman]

Need
glove box insert, grommet
1 window crank
Flywheel cover
Choke knob
Z bar? And clutch rod?
Fan shroud
not really anything detrimental I can think of
Soon clutch stuff for a v8

[GMCNUT]

Originally Posted by sharkskinman

Need
glove box insert, grommet
1 window crank
Flywheel cover
Choke knob
Z bar? And clutch rod?
Fan shroud
not really anything detrimental I can think of
Soon clutch stuff for a v8

Shark, I don't think you want a used glovebox insert even if I had one - talk about something that would be ragged if you did find one - whew! I highly recommend you buying that new, and whatever grommet you are talking about too. Same for the window crank and choke knob for that matter - this is all super cheap stuff to get from LMC, The Truck Shop, Classic Parts, Jim Carter, etc....I have a clutch rod and probably the Z bar out of a 63 that a guy just took the manual 3 speed trans out of. 6 cyl trucks often has a metal 3 piece fan shroud, and V8's usually had a fiberglass one - the fiberglass one is reproduced so if you want a nice one, that is the way to go there. Most of the "survivor" fiberglass shrouds are not worth having because they are normally busted or at least cracked

[65TRUK]

Do you have a cab that you are cutting up for donor panels? I need the passenger side back corner. let me know. Thanks,

[GMCNUT]

Originally Posted by 65TRUK

Do you have a cab that you are cutting up for donor panels? I need the passenger side back corner. let me know. Thanks,

I am sorry - don't have what you need, but know a guy in California who dismantles trucks who might. PM for his contact info

[mjavelar]

Hi- I have a 65 C-10 --I'm in need of a hood, doors, rear wheel housing,even a roof panel if that is available? Can you help?

[GMCNUT]

Originally Posted by mjavelar

Hi- I have a 65 C-10 --I'm in need of a hood, doors, rear wheel housing,even a roof panel if that is available? Can you help?

Well, there have to be a million guys all wanting a solid 62-66 Chevy hood, but I am reading these requests in reverse order from most recent back, so you are the first I spotted asking - I do have a couple of nice 62-66 hoods - do not have pictures at present, and it will likely be the weekend before I can take any because I work all day like a slave - so PM your email address or photo-accepting cell # and I will send them this weekend.
On doors, I only have two solid 64-66 doors I think, and if I remember right, they are both Drivers side ones - no pass sides currently.
When you ask for a rear wheel housing, I assume you mean Fleetside bed wheel tubs maybe? I only sell them in pairs if that is what you mean, and not sure but think I have at least one set.
Already sold the only 64-66 roof panel I had to offer - sorry

[VictoriaHardware]

This thread needs to be closed

[sharkskinman]

Closed why? This is a great thread!

[AngryPirate]

Because it's old and I'm not sure there are any parts left and everyone who's ever asked a question about parts gets notified. I suppose I could just unsubscribe.

[GMCNUT]

Originally Posted by AngryPirate

Because it's old and I'm not sure there are any parts left and everyone who's ever asked a question about parts gets notified. I suppose I could just unsubscribe.

Let me know what you need Pirate - I am about to start sticking a bunch of parts on the board again so now's a good time to ask and see if I have whatever it is, or maybe I know someone who has it

[ibuybrits]

I am needing both doors for a 61 Apache. A hydraulic bell housing for V-8 and front motor mount. I am in Talladega, what is your phone number? Mine is 2563620549. Thanks Greg

[AngryPirate]

Originally Posted by ibuybrits

I am needing both doors for a 61 Apache. A hydraulic bell housing for V-8 and front motor mount. I am in Talladega, what is your phone number? Mine is XXXXXXXXXX. Thanks Greg

Prob not a great idea to put your phone number in the forum, but perhaps PM the person.

Worth noting, this thread is old and I don't believe OP has responded to it in quite some time.

[GMCNUT]

Originally Posted by ibuybrits

I am needing both doors for a 61 Apache. A hydraulic bell housing for V-8 and front motor mount. I am in Talladega, what is your phone number? Mine is 2563620549. Thanks Greg

Great meeting you Greg - hope the doors and battery tray work out for you

[sharkskinman]

Wish classifieds were better arranged
I'm looking for some parts but cant yet post a WTB ad so I have to keep looking thru these posts and most is already gone when asking for it