1964 GMC 1500 "crustine" semi- build. - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TJ's Chevy · 06-16-2017, 10:34 AM

Quote:

Originally Posted by Palf70Step

haha Thanks man!

TJ's Chevy · 07-08-2017, 11:04 AM

Hi guys! Well Crustine's 600 cfm eddy was really not taking the Oregon heat very well. Flat spots off idle, nasal leakage, loading up.....so I figured it was time for a little down grade. Purchased a 500 cfm eddy and a fuel regulator. Those carter pumps are just to much for these carbs. haha Anyhow, runs better now and no more flooding out. Set the regulator to 5.5 psi hot and it seems good. Need to jet down a bit more, but much better than before.

Bomp · 07-08-2017, 02:46 PM

Win.
Always better when things run smoother.

**Palf70Step** · 07-08-2017, 03:48 PM

TJ's Chevy · 07-09-2017, 01:05 AM

Quote:

Originally Posted by Bomp

Win.
Always better when things run smoother.

Heck yeah!

Quote:

Originally Posted by Palf70Step

TJ's Chevy · 01-02-2018, 01:23 AM

Crustine has been an awesome daily driver since the 1st day.

She's always thirsty, but it's worth the fun, smiles, and conversations.

Shot of her warming up this morning and after a long over due bath.

Might be painting another set of valve covers so the engine has dual breathers and an old school pcv setup.

66Submarine · 01-02-2018, 09:36 PM

Looks good, glad to hear it.

duallyjams · 01-03-2018, 11:49 AM

I see someone who really enjoys driving there truck.

TJ's Chevy · 01-03-2018, 10:56 PM

Quote:

Originally Posted by 66Submarine

Looks good, glad to hear it.

Thanks!

Quote:

Originally Posted by duallyjams

I see someone who really enjoys driving there truck.

Yup!

TJ's Chevy · 04-20-2018, 12:29 AM

With my new job now being 30 miles one way and 10 hour days Crustine is now an evening/weekend driver. After 2 years of daily driving it was WELL over due to change out the seat cover. One given to me as a gift served time in my 66 and then in this truck. Was torn up so bad it was embarrassing to have it On there. SO...today a very nicely made cover showed up that fits much better and in my opinion looks much better.

**Palf70Step** · 04-20-2018, 07:33 AM

Looks good.

TJ's Chevy · 04-21-2018, 12:34 AM

Quote:

Originally Posted by Palf70Step

Looks good.

Thanks buddy!

TJ's Chevy · 04-24-2018, 12:47 AM

Saw this set of train horns at a car show and had to get them for the GMC. 152 decibels.

**Palf70Step** · 04-24-2018, 09:42 AM

LostMy65 · 06-12-2018, 12:12 AM

Quote:

Originally Posted by TJ's Chevy

Saw this set of train horns at a car show and had to get them for the GMC. 152 decibels.

Fun stuff.

TJ's Chevy · 06-16-2018, 12:59 AM

Quote:

Originally Posted by LostMy65

Fun stuff.

Thanks!

**straight6chevyguy** · 12-19-2018, 12:57 AM

Nice truck!
I like the sound of that exhaust!

TJ's Chevy · 12-19-2018, 08:31 PM

Quote:

Originally Posted by straight6chevyguy

Nice truck!
I like the sound of that exhaust!

Thanks!

TJ's Chevy · 08-28-2019, 09:27 PM

Well I got this tool box for Crustine a couple days back. Funny how well it matches. The bed is too wide for the box so I'll be making some mounting plates. I'll post some pics when that's all done but I'm stoked she's got a box now. No more cluttering up the cab with stuff now haha

**Palf70Step** · 08-29-2019, 11:03 AM

Very fitting for her!

**straight6chevyguy** · 09-03-2019, 12:57 PM

Nice!

TJ's Chevy · 09-12-2019, 09:33 PM

Quote:

Originally Posted by Palf70Step

Very fitting for her!

Quote:

Originally Posted by straight6chevyguy

Nice!

Thanks guys!

**aotte1** · 10-06-2019, 01:12 AM

In the process of working on 1966 GMC Suburban.
Pretty original drive train/suspension, non-original engine.

Just purchased a 66’ 351E engine with 51K miles, not started In several years.

Do you know of good source for engine rebuild parts, for the GMC V6.

Your PM box is full.

Les

TJ's Chevy · 03-21-2020, 02:54 AM

Tinkered on Crustine a bit thursday as the weather has been nice an warm. Always had to much fuel pressure from the carter pump so installed a new regulator and adjusted it down to 4.5 psi. She's due for vc gaskets and a good tune up so we'll git on that tomorrow hopefully.

Ta2Don · 04-19-2020, 05:33 PM

Lookin' Good TJ. Call me.

07-08-2017, 11:04 AM	#352
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. Hi guys! Well Crustine's 600 cfm eddy was really not taking the Oregon heat very well. Flat spots off idle, nasal leakage, loading up.....so I figured it was time for a little down grade. Purchased a 500 cfm eddy and a fuel regulator. Those carter pumps are just to much for these carbs. haha Anyhow, runs better now and no more flooding out. Set the regulator to 5.5 psi hot and it seems good. Need to jet down a bit more, but much better than before. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-08-2017, 02:46 PM	#353
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 1964 GMC 1500 "crustine" semi- build. Win. Always better when things run smoother.

07-08-2017, 03:48 PM	#354
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 1964 GMC 1500 "crustine" semi- build. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-02-2018, 01:23 AM	#356
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. Crustine has been an awesome daily driver since the 1st day. She's always thirsty, but it's worth the fun, smiles, and conversations. Shot of her warming up this morning and after a long over due bath. Might be painting another set of valve covers so the engine has dual breathers and an old school pcv setup. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-02-2018, 09:36 PM	#357
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: 1964 GMC 1500 "crustine" semi- build. Looks good, glad to hear it. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

01-03-2018, 11:49 AM	#358
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1964 GMC 1500 "crustine" semi- build. I see someone who really enjoys driving there truck. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-20-2018, 12:29 AM	#360
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. With my new job now being 30 miles one way and 10 hour days Crustine is now an evening/weekend driver. After 2 years of daily driving it was WELL over due to change out the seat cover. One given to me as a gift served time in my 66 and then in this truck. Was torn up so bad it was embarrassing to have it On there. SO...today a very nicely made cover showed up that fits much better and in my opinion looks much better. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

04-20-2018, 07:33 AM	#361
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 1964 GMC 1500 "crustine" semi- build. Looks good. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-24-2018, 12:47 AM	#363
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. Saw this set of train horns at a car show and had to get them for the GMC. 152 decibels. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

04-24-2018, 09:42 AM	#364
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 1964 GMC 1500 "crustine" semi- build. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-19-2018, 12:57 AM	#367
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 1964 GMC 1500 "crustine" semi- build. Nice truck! I like the sound of that exhaust!

08-28-2019, 09:27 PM	#369
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. Well I got this tool box for Crustine a couple days back. Funny how well it matches. The bed is too wide for the box so I'll be making some mounting plates. I'll post some pics when that's all done but I'm stoked she's got a box now. No more cluttering up the cab with stuff now haha Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-29-2019, 11:03 AM	#370
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: 1964 GMC 1500 "crustine" semi- build. Very fitting for her! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-03-2019, 12:57 PM	#371
straight6chevyguy Senior Member Join Date: Dec 2018 Location: yamhill OR Posts: 909	Re: 1964 GMC 1500 "crustine" semi- build. Nice! __________________ 1965 chevy c20 292 4speed http://67-72chevytrucks.com/vboard/s...d.php?t=777601 1976 chevy c10 250 4speed http://www.67-72chevytrucks.com/vboa...d.php?t=787037 1978 chevy c20 350 4speed 1998 chevy c1500 4.3L 5speed 2002 Chevy s10 4.3L auto 4x4 Plus a Mercury & some Fords... To many projects!

10-06-2019, 01:12 AM	#373
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 1964 GMC 1500 "crustine" semi- build. In the process of working on 1966 GMC Suburban. Pretty original drive train/suspension, non-original engine. Just purchased a 66’ 351E engine with 51K miles, not started In several years. Do you know of good source for engine rebuild parts, for the GMC V6. Your PM box is full. Les



Register or Log In To remove these advertisements.

03-21-2020, 02:54 AM	#374
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1964 GMC 1500 "crustine" semi- build. Tinkered on Crustine a bit thursday as the weather has been nice an warm. Always had to much fuel pressure from the carter pump so installed a new regulator and adjusted it down to 4.5 psi. She's due for vc gaskets and a good tune up so we'll git on that tomorrow hopefully. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

04-19-2020, 05:33 PM	#375
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: 1964 GMC 1500 "crustine" semi- build. Lookin' Good TJ. Call me. __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.