"TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yfs200p · 01-30-2014, 09:25 PM

Sweet project, that is going to be the best of both worlds in the end. Any updates?

**fakerwade** · 02-04-2014, 05:12 PM

Quote:

Originally Posted by FrankieD

Hey Buddy I didn't get a short bed or a k-10 I ended up with a nice 94 K-2500 extended cab long bed W/a 4" body lift Most of the parts I have are for K-2500's so I don't have to collect any more parts. This will be a running project.

Hey FrankieD, You know I'm sorry to see the other truck go, but it looks like you picked up a pretty nice ride! Good luck with this one!!

,
,

Quote:

Originally Posted by PHAT TONY

T!ts or tires; one's always a problem keep at it.

Thanks Tony, I'm going to persevere!!
,
,

Quote:

Originally Posted by yfs200p

Sweet project, that is going to be the best of both worlds in the end. Any updates?

Thanks for the Interest,,, I just finished up my divorce and sold the house last year. My finances took a beating. Lost 10 grand on the house alone. I still need to buy a compressor for the shop where Tangerine is at and have it wired in. The nice part is I now live in a part of my friend's (Dan) house that he wasn't using, so I'm at the same place where Tangerine is. It will make it a lot easier to just walk out my front door and go to the shop and go to work on her once I get the compressor. Thanks again everyone for your patience and continued support and interest.

**Dieselwrencher** · 02-04-2014, 08:54 PM

Man, sorry to hear about all that. I hope it all works out for you now. Keep at it man.

68 TT · 04-19-2014, 03:07 AM

How are things in your world Wade?

Making any progress on the truck?

gr8one · 12-22-2014, 10:39 PM

any updates

**fakerwade** · 02-10-2015, 04:43 PM

Hey guy's,,thanks for the continued interest!! No new updates on the truck,,,as you know I feel extremely blessed just to be able to hold on to it after a job loss and a divorce. Since then I've tried 3 new jobs hoping to find one that will pay well enough to get caught up and be able to get back to work on Tangerine. I think I have finally found just the job. After I get done with tax season I hope to start putting some money away for an air compressor. Then let the fun begin! Thanks again.

Operatorfailure · 02-10-2015, 10:10 PM

Good luck man. I'm wanting to do a very similar thing, just a lowered 4wd instead. I hope to see updates soon!

mechanicalman · 02-16-2015, 06:11 PM

Quote:

Originally Posted by fakerwade

Hey guy's,,thanks for the continued interest!! No new updates on the truck,,,as you know I feel extremely blessed just to be able to hold on to it after a job loss and a divorce. Since then I've tried 3 new jobs hoping to find one that will pay well enough to get caught up and be able to get back to work on Tangerine. I think I have finally found just the job. After I get done with tax season I hope to start putting some money away for an air compressor. Then let the fun begin! Thanks again.

Best of luck, divorce sucks even if you want it. I think you will pull yourself up and get back to where you were even better than before. What doesn't kill you......makes you stronger!

Sub'd.

**fakerwade** · 04-21-2016, 12:21 PM

Hey guy's,,,I'M BACK!! Sorry it took so long. I recently acquired a brand new air compressor that I call "The Beast"!! (picture coming soon) Now I can get back to work on my baby.

**Palf70Step** · 04-21-2016, 06:09 PM

Kewl

I am really looking forward to future updates

**fakerwade** · 04-24-2016, 11:13 PM

Quote:

Originally Posted by Palf70Step

Kewl

I am really looking forward to future updates

Thanks Palf70Step,, I'm pretty excited to be able to get back to work on it!!

As promised,, pictures of the new compressor,,,Specs are: 80 gal. tank, 200 max psi. ACFM 24 at 175psi!! This should get the job done!

Also pictured is the current state of my truck. Before it got moth balled, I took it all back apart to do the rust repairs and body work on the front fenders and doors. So this is where I'm going to start (again). I do have some mods I'd like to do on both the doors and the fenders,, so that's going to be interesting to see how well they turn out. Thanks again for all the interest.

cpet72GMC · 04-25-2016, 07:42 AM

Sweet! Can't wait to see this build going again.
Posted via Mobile Device

mcbassin · 04-25-2016, 04:57 PM

Very nice air compressor Wade! Time to get this party going again.....

**Palf70Step** · 04-25-2016, 05:55 PM

Quote:

Originally Posted by mcbassin

Very nice air compressor Wade! Time to get this party going again.....

**Dieselwrencher** · 04-25-2016, 08:42 PM

Wade, it's great to see you back on here! That air compressor is sweet! So, what are these secret squirrel mods?

**fakerwade** · 04-25-2016, 11:14 PM

Quote:

Originally Posted by mcbassin

Very nice air compressor Wade! Time to get this party going again.....

Quote:

Originally Posted by Palf70Step

Quote:

Originally Posted by Dieselwrencher

Wade, it's great to see you back on here! That air compressor is sweet! So, what are these secret squirrel mods?

Thanks Mike,,thanks for coming back for more fun!! Congrats again on the TOTM,,too cool!!

Thanks Bill!! I didn't like the idea of buying one too small and then waiting for the compressor to keep up with the air sanders and die grinders.

Thanks Ryan,,It's great to be back,,,I like getting idea's and learning techniques from guys like you. As far as my body mods,,, well,, you'll just have to stick around and see!!!

solidaxel · 05-03-2016, 01:25 AM

,Answered my questions !
I like it

**fakerwade** · 05-09-2016, 09:17 PM

Quote:

Originally Posted by solidaxel

,Answered my questions !
I like it

Hey solidaxle,, So far I've answered a whole bunch of questions I had too! (mostly about my sanity,, or lack there of!!

) I'm glad I could help. Stick around,, more fun coming up!!

**fakerwade** · 05-09-2016, 09:26 PM

Ok,,, I've spent the last couple of weekends helping friends and family by working on their broke down cars. However I did manage to get a few things done on the project. First thing that had to be done was breaking down the old box (bed) cause it was in the way and I'm sick of needing 4 guys to move it around. I thought I would need to keep the bedsides and cut them down to a custom size for this build,, but after re-measuring things I'm thinking that the standard shortbox sides should work.

**fakerwade** · 05-09-2016, 09:29 PM

I also started working on the right fender. I stripped it and found plenty of good old rust and some dents and dings.

**fakerwade** · 05-09-2016, 09:44 PM

I also managed to "rough in" my mod for the fender. I plan on putting in the 72 side marker lights, like a lot of guys do, but I wanted to kind-of "french" mine in. I had the local metal fab shop computer plasma cut some blanks out that are a little smaller than what the L.E.D. side marker lights would fit though. I also had them made out of thicker (than 18 gauge) steel. I hand finished them to fit the light and with the thicker steel,, it sets the depth right where I wanted them and it gave me a good place to weld on some attaching studs.

.
Showing the difference between the blank and 18ga steel. I think it's 1/8th inch steel,,but I had these cut over 2 years ago,,,memory is kind of fuzzy.

.

**fakerwade** · 05-09-2016, 09:48 PM

**fakerwade** · 05-09-2016, 09:49 PM

**Palf70Step** · 05-10-2016, 05:17 AM

Very nice work on the side markers.

mcbassin · 05-10-2016, 08:28 AM

Nice work on the custom marker lights Wade.

01-30-2014, 09:25 PM	#376
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Sweet project, that is going to be the best of both worlds in the end. Any updates? __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

02-04-2014, 08:54 PM	#378
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Man, sorry to hear about all that. I hope it all works out for you now. Keep at it man. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-19-2014, 03:07 AM	#379
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) How are things in your world Wade? Making any progress on the truck? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

12-22-2014, 10:39 PM	#380
gr8one Registered User Join Date: Nov 2004 Location: Fort Meade Fl Posts: 184	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) any updates

02-10-2015, 04:43 PM	#381
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Hey guy's,,thanks for the continued interest!! No new updates on the truck,,,as you know I feel extremely blessed just to be able to hold on to it after a job loss and a divorce. Since then I've tried 3 new jobs hoping to find one that will pay well enough to get caught up and be able to get back to work on Tangerine. I think I have finally found just the job. After I get done with tax season I hope to start putting some money away for an air compressor. Then let the fun begin! Thanks again. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

02-10-2015, 10:10 PM	#382
Operatorfailure Registered User Join Date: Apr 2011 Location: Springfield, MO Posts: 172	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Good luck man. I'm wanting to do a very similar thing, just a lowered 4wd instead. I hope to see updates soon! __________________ My 68 Stepper build

04-21-2016, 12:21 PM	#384
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Hey guy's,,,I'M BACK!! Sorry it took so long. I recently acquired a brand new air compressor that I call "The Beast"!! (picture coming soon) Now I can get back to work on my baby. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

04-21-2016, 06:09 PM	#385
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Kewl I am really looking forward to future updates __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-25-2016, 07:42 AM	#387
cpet72GMC Registered User Join Date: Nov 2009 Location: Casa Grande Arizona Posts: 14	Sweet! Can't wait to see this build going again. Posted via Mobile Device

04-25-2016, 04:57 PM	#388
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Very nice air compressor Wade! Time to get this party going again..... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-25-2016, 08:42 PM	#390
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Wade, it's great to see you back on here! That air compressor is sweet! So, what are these secret squirrel mods? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-03-2016, 01:25 AM	#392
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) ,Answered my questions ! I like it __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

05-09-2016, 09:26 PM	#394
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Ok,,, I've spent the last couple of weekends helping friends and family by working on their broke down cars. However I did manage to get a few things done on the project. First thing that had to be done was breaking down the old box (bed) cause it was in the way and I'm sick of needing 4 guys to move it around. I thought I would need to keep the bedsides and cut them down to a custom size for this build,, but after re-measuring things I'm thinking that the standard shortbox sides should work. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

05-09-2016, 09:29 PM	#395
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) I also started working on the right fender. I stripped it and found plenty of good old rust and some dents and dings. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

05-09-2016, 09:44 PM	#396
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) I also managed to "rough in" my mod for the fender. I plan on putting in the 72 side marker lights, like a lot of guys do, but I wanted to kind-of "french" mine in. I had the local metal fab shop computer plasma cut some blanks out that are a little smaller than what the L.E.D. side marker lights would fit though. I also had them made out of thicker (than 18 gauge) steel. I hand finished them to fit the light and with the thicker steel,, it sets the depth right where I wanted them and it gave me a good place to weld on some attaching studs. . Showing the difference between the blank and 18ga steel. I think it's 1/8th inch steel,,but I had these cut over 2 years ago,,,memory is kind of fuzzy. . __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro



Register or Log In To remove these advertisements.

05-09-2016, 09:48 PM	#397
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

05-09-2016, 09:49 PM	#398
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

05-10-2016, 05:17 AM	#399
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Very nice work on the side markers. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-10-2016, 08:28 AM	#400
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3) Nice work on the custom marker lights Wade. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.