My new project 86 Silverado

[77ChevySharkBite]

Originally Posted by naphtali5725

yeah man I have ADD so I go from one thing to another... my brakes are all set to put on the 9" but I need the e-brake stuff before i get motivated to do it LOL
All the other stuff is kinda easy, the brake/fuel line clips blah blah. then I have to torque nuts/bolts and the rolling chassis will be done! I can't wait.
My cab/fenders are sanded and primed...then I need the bed sanded and prepped. already got all the lights. will be getting the front pieces soon.

What bumpers do people recommend? any part numbers or pics?

Once I get that stuff, maybe 2 weekends of turning wrenches and this thig will be ready to test drive... my deadline is September 5th, so I got's to work hard keep me motivated!!

You ADD too? Yeah I don't have a bad case of it but yeah I'll do one thing one moment and then do something different the next lol you'll be jammed back and a rolling no doubt! I have faith in you my bother!

It just depends on your preference man, some people use sport bumpers, or roll pans, just depends on the look you want.

How about you push that deadline to September 15th, it's my birthday! So as a birthday present you could conviently have it done haha no I have faith in you man you can do it, you've been faithful to work on the truck when you have parts, and weather permits! You can and will have it done by September 5th!!!

[rs74]

Originally Posted by 77ChevySharkBite

How about you push that deadline to September 15th, it's my birthday! So as a birthday present you could conviently have it done haha no I have faith in you man you can do it, you've been faithful to work on the truck when you have parts, and weather permits! You can and will have it done by September 5th!!!

That's funny because my wifes birthday is Sept.5th and my oldest daughters b-day is Sept.15th. Of coarse then there is my b-day Sept. 16th. So just take you pic man. They are all good days.

[naphtali5725]

Originally Posted by rs74

That's funny because my wifes birthday is Sept.5th and my oldest daughters b-day is Sept.15th. Of coarse then there is my b-day Sept. 16th. So just take you pic man. They are all good days.

LOL I was hoping by my birthday but it was the 26th, my son's is Sept 4th, my other son is November 6th, so i'm hoping on Sept 5th as soon as I think I can do it

[77ChevySharkBite]

I know you can do it!

[naphtali5725]

got my parking brake cables today... now I can put the brakes together on the rear of the truck, pics tomorrow... drinking sake right now, and I don't feel like pulling out the camera LOL

[77ChevySharkBite]

Well it's 12:06 here in Texas which makes it July 4th.

I just want to tell you thank you for serving our country, and fighting for my freedom, it's been an honor getting to know you. Your an absolute hero and thank you for your service to this country. God bless you and your family man

Korwin aka SharkBite
Posted via Mobile Device

[naphtali5725]

Originally Posted by 77ChevySharkBite

Well it's 12:06 here in Texas which makes it July 4th.

I just want to tell you thank you for serving our country, and fighting for my freedom, it's been an honor getting to know you. Your an absolute hero and thank you for your service to this country. God bless you and your family man

Korwin aka SharkBite
Posted via Mobile Device

thank you for the kind words, it was a privilege, glad to be here on the forum meeting all you cool folks... happy 4th, now go do some partying

[naphtali5725]

I think I found the dash for my truck.... you can see it here:
http://diy4x.com/cart/index.php?rout...product_id=148

and some custom graphics for it here:

http://coloradok5.com/forums/showthr...247011&page=37

[77ChevySharkBite]

Well you told me to party so I'm partying and here's my picture to prove it.


Posted via Mobile Device

[naphtali5725]

Originally Posted by 77ChevySharkBite

Well you told me to party so I'm partying and here's my picture to prove it.


Posted via Mobile Device

LOL

[naphtali5725]

7" rods, and Pontiac pistons for my Olds 455... block is almost machined...

[77ChevySharkBite]

Originally Posted by naphtali5725

7" rods, and Pontiac pistons for my Olds 455... block is almost machined...

Yippe!!!! It's pretty!

[naphtali5725]

455 crank before getting machined...

[77ChevySharkBite]

I have to admit the more I see this motor and see it come together it makes me want a motor like yours that much more!! So what I'm trying to say is that I envy you!
Posted via Mobile Device

[naphtali5725]

Originally Posted by 77ChevySharkBite

I have to admit the more I see this motor and see it come together it makes me want a motor like yours that much more!! So what I'm trying to say is that I envy you!
Posted via Mobile Device

hey thanks man, go ahead and keep on working on your truck!!

[naphtali5725]

Rebuilt steering gear, and KYB shocks arrived today yaaay!
Now I can finish all the steering/suspension and get on with the brake/fuel tanks/lines.. yeeeeehaw!

[77ChevySharkBite]

Originally Posted by naphtali5725

hey thanks man, go ahead and keep on working on your truck!!

I'm done for the night, wasn't much more to be done plus I gotta eat I'm chubby so I gotta eat this weekend I'm planning to finish up everything I gotta go but some 80 grit sand paper help take off that paint

Originally Posted by naphtali5725

Rebuilt steering gear, and KYB shocks arrived today yaaay!
Now I can finish all the steering/suspension and get on with the brake/fuel tanks/lines.. yeeeeehaw!

Man those KYB shocks are awesome!! My dad had some on his truck and man there a dream!

Woohoo!!!! Can't wait to see the pictures!!!
Posted via Mobile Device

[rs74]

Originally Posted by naphtali5725

Rebuilt steering gear, and KYB shocks arrived today yaaay!
Now I can finish all the steering/suspension and get on with the brake/fuel tanks/lines.. yeeeeehaw!

Yeah I am curious how that rear brake line is going to fit. The one I ordered could have been longer but it was made by a different company.

[naphtali5725]

Originally Posted by rs74

Yeah I am curious how that rear brake line is going to fit. The one I ordered could have been longer but it was made by a different company.

I'll let you know in a couple of days, have to make an unplanned trip...

[naphtali5725]

Olds 455 block before going to machinist...

[Sodell]

You OK, how goes it man!!

[rs74]

Originally Posted by Sodell

You OK, how goes it man!!

I have been thinking the same thing for the last few days. I figured he would post up his truck out of nowhere about half put together already.

Yes do check in. Inquiring minds want to know.

[naphtali5725]

Hey guys!

Had to make an unexpected 1000 mile trip to get my Dad, he is here for a few weeks/months. He'll be helping me work on my truck in-between fly fishing

Have lots of pics to post of all the parts I got in...
All is well, just a little delayed, but that's OK. Still plan on being done by years end!

stay tuned, lot's of work in the next week or so.

[rs74]

Glad to hear all is good. Enjoy the time with your dad. There is nothing like making memories.

[77ChevySharkBite]

x2 on what rs74 said.

Glad to know your okay, if y'all catch anything good hope to see some pictures of it