The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-22-2019, 02:58 AM   #1
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,870
HP Tuners Tutorials

with your permission I would like to post some HP Tuners Tutorials for absolute beginners while this stuff is fresh in my mind following my swap. (2001 GMC Sierra donor 4.8L / 4L60e into a 1974 GMC / C10 2WD aka "Rusty...lives")

I have originally posted these on the LS Swapped Square Body GM Trucks ('73-'86 C/K & '87-'91 R/V) Facebook Group receiving positive feedback and a suggestion was made that unfortunately it is difficult to find all prior older posts there and that I may want to find an alternative home for these resources.

so hope you don't mind, feedback and corrections welcomed, may take me a while to reformat them to fit this forum format

================== TABLE OF CONTENTS =======================
--- SERIES 1 - Housekeeping ---
Part I - VATS Delete
Part II - Change the Tachometer RPM output to an 8 cylinder V8.
Part III - Change Tire Size and Gear Ratio
Part IV - Turn Off Exhaust Gas Recirculation EGR. (1999-2001 donor engines only)
Part V - Turn Off the Air Pump.
Part VI - Turn Off Speed Limiter
Part VII - Set Fuel Tank Capacity
Part VIII - Turn Off Catalyst Startup Correction & Over Temp Protection
Part IX - Enable Power Enrichment aka Accelerator Pump / Secondaries
Part X - Customize Torque Management (TBD)
Part XI - Turn Off Traction Control (TBD)
--- SERIES 2 - Codes ---
Section A - Disable the Oxygen Sensors (O2s) Codes
Section B - Disable the Evaporative Emission System (EVAP) Codes
Section C - Disable the Exhaust Gas Recirculation (EGR) Codes
Section D - Disable the Secondary Air Injection Codes
Section E - Disable the Fuel Level Sensor Codes
Section F - Disable the Catalyst System Codes
--- SERIES 3 - Tuning ---
Chapter 0 - To Tune Or Not To Tune

Chapter 1 - Logging (aka the VCM Scanner)
- Channels
- Histograms (Graphs)
- Charts
- Gauges
Chapter 2 - Fueling
Part 0 - Fuel Trims Explained
Part 1 - MAF Calibration
Part 2 - VE Calibration
Chapter 3 - Timing
- High Octane & Low Octane Tables
- Timing Advance vs Base Advance
- Knock Retard
Chapter 4 - Idle
- Idle Desired RPM
- Idle Advance
- Idle Desired Airflow
Chapter 5 - Cruise (TBD)

Chapter 6 - WOT (TBD)
--- NOT COVERED IN THIS TUTORIAL ---
OS Upgrades (1 BAR => 2 BAR, etc.)
Cam Swaps
Injector Upgrades
Electric Fan Upgrades
Turbo Installs
Nitrous Setups
Flex Fuel and Alternative Fuels
A/C Air Conditioning
Segment Swaps (4L60e => 4L80e)
Manual Transmissions

Last edited by Gregski; 03-26-2021 at 10:32 AM.
Gregski is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com