The majic number 165365.5?? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gchemist · 01-03-2005, 09:40 PM

I'm going to try and get some of the neighborhood kids to help me push it in the garage tomorrow. If I can get it in, I'll look into finding the problem on Wednesday. It should not take me long to find it with some help. I mostly need someone to help me push it and bump the motor.

gchemist · 01-05-2005, 10:57 PM

IT LIVES!!!! Spent $64 and it started on the first crank. I just need to warm her up really good and reset the timing!!! It took me longer go and buy a part than to remove and install it. Next, get the registration and inspection sticker done this week!!
Anyone up for a 100 MPH challenge??

SanitysBane · 01-05-2005, 11:09 PM

looks like the 383 is once again on the back burner

Ric83 · 01-06-2005, 09:34 AM

Will that thing ever die!?!?

:p

MylilBowTie · 01-06-2005, 09:52 AM

What fixed it?

gchemist · 01-07-2005, 12:33 PM

The 383 is not on the back burner too far. I am in the process of locating parts. I just spent a day in SA looking for a short block. The AFR heads will take about 6-8 weeks to get once I order them. I have a overall plan I just need to execute.
The loud pop I heard was not the timing chain. It was the ignition module!!! I never heard of one pop before now. I should have suspected it a while back. At idle under very hot conditions the motor would shut off but start right backup. This time the module failed while running and hot.

Slonaker · 01-07-2005, 01:07 PM

Quote:

Originally Posted by gchemist

The 383 is not on the back burner too far. I am in the process of locating parts. I just spent a day in SA looking for a short block. The AFR heads will take about 6-8 weeks to get once I order them. I have a overall plan I just need to execute.
The loud pop I heard was not the timing chain. It was the ignition module!!! I never heard of one pop before now. I should have suspected it a while back. At idle under very hot conditions the motor would shut off but start right backup. This time the module failed while running and hot.

I thought your mom bought you a suburban block, or something. What happened to it?

Slonaker

gchemist · 01-07-2005, 07:00 PM

I have a roller block. I'm going to use it as a core or trade it on another. I'l be visiting SA again probably within the next two weeks. I found two places that are recommended. If the truck holds up I will probably drive it to SA just for fun.

Slonaker · 01-07-2005, 07:23 PM

Let me know when you get into town, if you have the time.

Slonaker

*1FaastC10* · 01-07-2005, 07:58 PM

you paid $64 for an ignition module?! someone saw you coming!

gchemist · 01-08-2005, 12:40 AM

You forgot the rotor, cap.......

01-05-2005, 11:09 PM	#28
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	looks like the 383 is once again on the back burner __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

01-06-2005, 09:34 AM	#29
Ric83 Registered User Join Date: Jan 2003 Location: Austin, TX Posts: 824	Will that thing ever die!?!? :p __________________ Ric '83 Silverado SWB Fleetside Here she is

01-06-2005, 09:52 AM	#30
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	What fixed it? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

01-07-2005, 07:23 PM	#34
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Let me know when you get into town, if you have the time. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-03-2005, 09:40 PM	#26
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I'm going to try and get some of the neighborhood kids to help me push it in the garage tomorrow. If I can get it in, I'll look into finding the problem on Wednesday. It should not take me long to find it with some help. I mostly need someone to help me push it and bump the motor.

01-05-2005, 10:57 PM	#27
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	IT LIVES!!!! Spent $64 and it started on the first crank. I just need to warm her up really good and reset the timing!!! It took me longer go and buy a part than to remove and install it. Next, get the registration and inspection sticker done this week!! Anyone up for a 100 MPH challenge??

01-07-2005, 12:33 PM	#31
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	The 383 is not on the back burner too far. I am in the process of locating parts. I just spent a day in SA looking for a short block. The AFR heads will take about 6-8 weeks to get once I order them. I have a overall plan I just need to execute. The loud pop I heard was not the timing chain. It was the ignition module!!! I never heard of one pop before now. I should have suspected it a while back. At idle under very hot conditions the motor would shut off but start right backup. This time the module failed while running and hot.

01-07-2005, 07:00 PM	#33
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I have a roller block. I'm going to use it as a core or trade it on another. I'l be visiting SA again probably within the next two weeks. I found two places that are recommended. If the truck holds up I will probably drive it to SA just for fun.

01-07-2005, 07:58 PM	#35
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	you paid $64 for an ignition module?! someone saw you coming!

01-08-2005, 12:40 AM	#36
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	You forgot the rotor, cap.......



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.