Parting Out, Chevy Shortbed 4x4... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 02-24-2005, 08:21 PM

how about the A/C junk from under the hood? Got everything?

90blzr · 02-25-2005, 01:10 PM

Quote:

Originally Posted by Destructo

how about the A/C junk from under the hood? Got everything?

Do you mean the stuff on the firewall? I have lots of that stuff, let me know what you need.

Destructo · 02-25-2005, 05:47 PM

Quote:

Originally Posted by 90blzr

Do you mean the stuff on the firewall? I have lots of that stuff, let me know what you need.

I need the compressor, condenser, and lines and wiring harness from the firewall to the compressor.

CDBleth · 02-28-2005, 04:00 PM

I don't know if you saw my last reply. I figured I would try you again. I am good for coming to get it for the right price. Let me know. Thanks in advance.

90blzr · 03-01-2005, 06:20 PM

Quote:

Originally Posted by CDBleth

I don't know if you saw my last reply. I figured I would try you again. I am good for coming to get it for the right price. Let me know. Thanks in advance.

Hey man, my bad...I was in a hurry and just saw the aluminum slip yoke housing. I know I had a NP208, but I must have sold it. The one I have that I thought was the 208 is actually an NP205.
Sorry for the delay and confusion

90blzr · 02-25-2005, 01:11 PM

Quote:

Originally Posted by CDBleth

Are you willing to ship it to AZ or pick-up only?

I'll ship if you pay for it. Depending on what you want and where you are at, it may be cheaper to drive. I am about 5.5 hours from phoenix.

CDBleth · 02-25-2005, 05:43 PM

how much do you want for it?

morglan · 03-01-2005, 04:42 PM

Power steering? How is the gearbox--does it leak? How much?

Thanks.

90blzr · 03-01-2005, 06:21 PM

Quote:

Originally Posted by morglan

Power steering? How is the gearbox--does it leak? How much?

Thanks.

I'll check on it for ya.

CDBleth · 03-02-2005, 01:46 PM

i thought about putting a 205 in there but decided that's more of a project that i am ready for a this time. gonna bite the bullet and buy a reman for 650. Thanks.

90blzr · 03-02-2005, 02:10 PM

If you want to put in a 205, you may as well do it now if you are gonna spend $$$ on a rebuilt 208...or at least put in a 241.
The 205 shouldnt be that big a deal. I would rather see ya spend $650 on a reman 205 than a 208.

good luck with whatever ya end up doin though

68Bowtie4x4 · 03-12-2005, 01:30 AM

90blzr,

What condition is the gray cloth bench seat and the interior plastic in? Do you have the headliner? What condition is the swb in? Do you have any pics of the parts? Let me know.

Thanks,
Doug

90blzr · 03-14-2005, 11:35 AM

Quote:

Originally Posted by 68Bowtie4x4

90blzr,

What condition is the gray cloth bench seat and the interior plastic in? Do you have the headliner? What condition is the swb in? Do you have any pics of the parts? Let me know.

Thanks,
Doug

Gray cloth bench seat is in real nice shape, I have the interior plastic and its in pretty good shape, a few pieces are painted blue (previous owner) but could be painted with whatever color you like. have a headliner, the bed is in VERY nice shape. I have pics. Give me your email address and I'll get you some.

79C10 · 03-12-2005, 05:23 PM

what about the Transfer case? how much $$

90blzr · 03-14-2005, 11:35 AM

Quote:

Originally Posted by 79C10

what about the Transfer case? how much $$

The t-case isnt an NP208 like I originally stated, its an NP205. I looked to quick when I posted. So I have an NP205 available

hotrodhomi · 03-14-2005, 11:12 AM

DO you still have the bed? It's a dual tank bed, right? Dents, rust? price?pics? Im in Sacto where are you?

90blzr · 03-14-2005, 11:37 AM

Quote:

Originally Posted by hotrodhomi

DO you still have the bed? It's a dual tank bed, right? Dents, rust? price?pics? Im in Sacto where are you?

I do still have the bed. VERY nice shape. Few dings on the inside, nothing major. NO RUST. Outside is NICE/STRAIGHT. Tailgate is damn near PERFECT. Panel against cab is STRAIGHT, not bowed out at all and not beat up at all!!
$500 for the bed. It is worth it, trust me. I see rusted out dented up crap going for $300+

oh yes and its a dual tank bed.

I am in Fillmore, about 5.5 hours from you. Off of the I-5
Come and get it!

morglan · 03-14-2005, 05:10 PM

Any luck with the steering gear box?

90blzr · 03-15-2005, 11:09 AM

Quote:

Originally Posted by morglan

Any luck with the steering gear box?

checked last night for ya.
No steering box, sorry.

90blzr · 03-17-2005, 11:10 AM

bump...bump

02-24-2005, 08:21 PM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	how about the A/C junk from under the hood? Got everything? __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.

02-28-2005, 04:00 PM	#4
CDBleth Registered User Join Date: Feb 2005 Location: Queen Creek, AZ Posts: 6	How much for the 208? I don't know if you saw my last reply. I figured I would try you again. I am good for coming to get it for the right price. Let me know. Thanks in advance.

03-02-2005, 01:46 PM	#10
CDBleth Registered User Join Date: Feb 2005 Location: Queen Creek, AZ Posts: 6	Thanks anyways!! i thought about putting a 205 in there but decided that's more of a project that i am ready for a this time. gonna bite the bullet and buy a reman for 650. Thanks.

03-12-2005, 01:30 AM	#12
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	90blzr, What condition is the gray cloth bench seat and the interior plastic in? Do you have the headliner? What condition is the swb in? Do you have any pics of the parts? Let me know. Thanks, Doug __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-25-2005, 05:43 PM	#7
CDBleth Registered User Join Date: Feb 2005 Location: Queen Creek, AZ Posts: 6	how much do you want for it?

03-01-2005, 04:42 PM	#8
morglan Registered User Join Date: Aug 2004 Location: Northern NY Posts: 63	Power steering? How is the gearbox--does it leak? How much? Thanks.

03-02-2005, 02:10 PM	#11
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	If you want to put in a 205, you may as well do it now if you are gonna spend $$$ on a rebuilt 208...or at least put in a 241. The 205 shouldnt be that big a deal. I would rather see ya spend $650 on a reman 205 than a 208. good luck with whatever ya end up doin though

03-12-2005, 05:23 PM	#14
79C10 Registered User Join Date: Jan 2005 Location: Northern Vermont Posts: 159	what about the Transfer case? how much $$

03-14-2005, 11:12 AM	#16
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	DO you still have the bed? It's a dual tank bed, right? Dents, rust? price?pics? Im in Sacto where are you?

03-14-2005, 05:10 PM	#18
morglan Registered User Join Date: Aug 2004 Location: Northern NY Posts: 63	Any luck with the steering gear box?

03-17-2005, 11:10 AM	#20
90blzr Registered User Join Date: Sep 2003 Location: SO. CAL. Posts: 413	bump...bump



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.