progress pics of the motorhome - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

classicchev · 05-26-2005, 08:02 PM

Quote:

Originally Posted by toms68cst

What are you going to skin the sides with?

Tom, Im using a product called Filon, its basically the same stuff as the new trailers have, but its not laminated to plywood. Nice and white, a good base for a funky paint or graphic job.

Roberty · 05-27-2005, 12:31 AM

That's gonna be one sweet 'lil motor home!! Keep up the great work and keep us updated.

classicchev · 05-29-2005, 12:16 AM

Almost got the exterior finished, run short of mouldings. Going to work on a a couple outside things tomorrow then start on the plumbing and electrical.

classicchev · 05-29-2005, 12:27 AM

Almost got the exterior finished, run short of mouldings. Going to work on a a couple outside things tomorrow then start on the plumbing and electrical.

wishihada55 · 05-30-2005, 08:50 PM

Looking Good Bro...................we will have to go camping with mom, dad and sis...........they wont want to park with us.............to classy

classicchev · 05-31-2005, 01:24 AM

If Michael ( aka lowburb , or the brother in law) doesn't hurry up and work on the "Burb" , they will have no choice to park near me because I will have to pull their trailer around for them.

More progress done, exterior is pretty much done, just have to figure out a way of doing the fender skirts, anyone have any ideas??.
Put the seats I got off Ebay in the front, even wired them up, electric seats are pretty cool.
Most of the electrical is done, just a couple more wires for the lights, but I run out of wire tonight. have most of the walls insulated, finish those little things up tomorrow night , then start on the water system.

dwaite72lnghrn · 05-31-2005, 05:58 AM

Man that looks tight on the back wheels, Hope you never have a blowout or flat tire, Looks like it would take off the side of the camper if it blew.

classicchev · 05-31-2005, 11:13 PM

Dave, Yah its just a little tight. Im still trying to source out some fender skirts, so I dont want to cut the arch yet.

classicchev · 06-09-2005, 08:33 PM

Back to the top so super72bb can see the project.

Botietruck · 06-09-2005, 09:26 PM

Great Job there! I also noticed those Dewalt tools. I'm a Dewalt man too. Keep those pics coming.

super72bb · 06-10-2005, 12:31 AM

Darren,

Looks great! You have done so much on it since the last time I saw it!!! I like the look of the Filion. Keep at hard at it and maybe you will be enjoying the fruits of your labor when camping season arrives. I wouldn't mind giving you a hand on it as I owe you big time for the wood. Talk to you next week.

Curt

Swbman · 06-10-2005, 11:27 AM

I know how it,its funny how when you start tearing stuff apart how easy and quickly it can be done,but when you have to start putting it all back together how expensive and time consuming it can be.

classicchev · 07-02-2005, 12:29 PM

Had to move this off page 25 before I loose it.
Havent been able to work on it much, but the electrical and the plumbing are almost done. got most of the walls insulated, just the roof left. hopefullly I will be able to cover up the walls soon, Im getting tired of seeing all that crap, and make it look a little more presentable.
I even put the seats out of a 2004 pickup in the cab, talk about comfort.

Ill post pics on sunday night of the progress of the weekend.

Darren

moneyguru · 07-02-2005, 01:35 PM

Good JOB!!

Keep up the good work, looking forward to seeing more pics of your progress!

Chris

**Canadian694x4** · 07-02-2005, 03:00 PM

Great Work...I look forward to more Progress Pics as well!

classicchev · 07-07-2005, 12:41 AM

ttt for the previous owner

Livrat · 07-07-2005, 12:52 AM

WOW... Darren ...thats looking great!!.. When can I come up and bring it back home??
I have a deposit on the BOSS and it is scheduled be picked up by a transporter to head to New Jersey next week.. then I am off for a 2 week road trip... AKA... Vacation

Livrat · 07-07-2005, 12:58 AM

We did drag home another project.. Deanna fell in love with a 1936 Desoto 2dr sedan... its getting a fatman fabrication front end.. 9in Ford rear.. and possibly a Blown 392 Hemi..

classicchev · 07-07-2005, 09:21 PM

Where did the mustang go? Its not in the picture behind the Desoto. Did you Ebay it, or sell it private? Did you get what you wanted dollar wise?

Livrat · 07-07-2005, 11:06 PM

The Boss 302 is at the house in the garage awaiting the new owner to pay it off and pick it up.. Sold it on the Boss Mustang Message board.. Yes I did get my asking price.. Although I think I should of asked more! LOL...

**kwmech** · 07-08-2005, 01:03 AM

Quote:

Originally Posted by breeh

You are a braver man than I! When I pulled the panelling away from mine, I decided it was sawzall time and hauled it all off to the dump!

My 69 GMC was the same way, even rotted into the floor. Same here, I hauled it to the dump, now I am in the middle of putting a flat bed on it.

wannabelow · 03-05-2007, 01:27 AM

any up date on this darren or did it get put on the back burner

Bishops Trucks · 03-05-2007, 01:30 AM

Nice work! Looks like you can start a business redoing old campers.

classicchev · 02-22-2009, 06:46 PM

Unfortunately this is now for sale, great project for someone with the talent and the time.

WILLING TO DEAL TO HAVE THIS GO TO SOMEONE WHO WILL GIVE IT SOME LOVE THAT IT DESERVES.

Darren

67_C-30 · 02-22-2009, 06:52 PM

Quote:

Originally Posted by classicchev

Unfortunately this is now for sale, great project for someone with the talent and the time.

WILLING TO DEAL TO HAVE THIS GO TO SOMEONE WHO WILL GIVE IT SOME LOVE THAT IT DESERVES.

Darren

Wow! This is a blast from the past! I had forgot about this build. I hope someone on the board is able to get it and finish it.

05-27-2005, 12:31 AM	#27
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	That's gonna be one sweet 'lil motor home!! Keep up the great work and keep us updated. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-29-2005, 12:16 AM	#28
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Update of exterior Almost got the exterior finished, run short of mouldings. Going to work on a a couple outside things tomorrow then start on the plumbing and electrical. __________________ 67- 72 Parts collecter

05-29-2005, 12:27 AM	#29
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Update of exterior Almost got the exterior finished, run short of mouldings. Going to work on a a couple outside things tomorrow then start on the plumbing and electrical. __________________ 67- 72 Parts collecter

05-31-2005, 01:24 AM	#31
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	If Michael ( aka lowburb , or the brother in law) doesn't hurry up and work on the "Burb" , they will have no choice to park near me because I will have to pull their trailer around for them. More progress done, exterior is pretty much done, just have to figure out a way of doing the fender skirts, anyone have any ideas??. Put the seats I got off Ebay in the front, even wired them up, electric seats are pretty cool. Most of the electrical is done, just a couple more wires for the lights, but I run out of wire tonight. have most of the walls insulated, finish those little things up tomorrow night , then start on the water system. __________________ 67- 72 Parts collecter

05-31-2005, 05:58 AM	#32
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	Man that looks tight on the back wheels, Hope you never have a blowout or flat tire, Looks like it would take off the side of the camper if it blew. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

05-30-2005, 08:50 PM	#30
wishihada55 Registered User Join Date: Apr 2005 Location: Canda Posts: 3	Looking Good Bro...................we will have to go camping with mom, dad and sis...........they wont want to park with us.............to classy

05-31-2005, 11:13 PM	#33
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Dave, Yah its just a little tight. Im still trying to source out some fender skirts, so I dont want to cut the arch yet. __________________ 67- 72 Parts collecter

06-09-2005, 08:33 PM	#34
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Back to the top so super72bb can see the project. __________________ 67- 72 Parts collecter

06-09-2005, 09:26 PM	#35
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Great Job there! I also noticed those Dewalt tools. I'm a Dewalt man too. Keep those pics coming.

06-10-2005, 12:31 AM	#36
super72bb Senior Member Join Date: Jan 2002 Location: calgary,Alberta,Canada Posts: 387	Darren, Looks great! You have done so much on it since the last time I saw it!!! I like the look of the Filion. Keep at hard at it and maybe you will be enjoying the fruits of your labor when camping season arrives. I wouldn't mind giving you a hand on it as I owe you big time for the wood. Talk to you next week. Curt __________________ 1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181

06-10-2005, 11:27 AM	#37
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	I know how it,its funny how when you start tearing stuff apart how easy and quickly it can be done,but when you have to start putting it all back together how expensive and time consuming it can be. __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

07-02-2005, 12:29 PM	#38
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Had to move this off page 25 before I loose it. Havent been able to work on it much, but the electrical and the plumbing are almost done. got most of the walls insulated, just the roof left. hopefullly I will be able to cover up the walls soon, Im getting tired of seeing all that crap, and make it look a little more presentable. I even put the seats out of a 2004 pickup in the cab, talk about comfort. Ill post pics on sunday night of the progress of the weekend. Darren __________________ 67- 72 Parts collecter

07-02-2005, 01:35 PM	#39
moneyguru Registered User Join Date: Oct 2002 Location: kalamazoo, mi Posts: 397	Good JOB!! Keep up the good work, looking forward to seeing more pics of your progress! Chris __________________ "Do the things you fear to do and the death of fear is certain"

07-02-2005, 03:00 PM	#40
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Great Work...I look forward to more Progress Pics as well! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

07-07-2005, 12:41 AM	#41
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	ttt for the previous owner __________________ 67- 72 Parts collecter



Register or Log In To remove these advertisements.

07-07-2005, 12:52 AM	#42
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	WOW... Darren ...thats looking great!!.. When can I come up and bring it back home?? I have a deposit on the BOSS and it is scheduled be picked up by a transporter to head to New Jersey next week.. then I am off for a 2 week road trip... AKA... Vacation

07-07-2005, 12:58 AM	#43
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	We did drag home another project.. Deanna fell in love with a 1936 Desoto 2dr sedan... its getting a fatman fabrication front end.. 9in Ford rear.. and possibly a Blown 392 Hemi.. Attached Images Last edited by Livrat; 07-07-2005 at 12:59 AM.

07-07-2005, 09:21 PM	#44
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Where did the mustang go? Its not in the picture behind the Desoto. Did you Ebay it, or sell it private? Did you get what you wanted dollar wise? __________________ 67- 72 Parts collecter

07-07-2005, 11:06 PM	#45
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	The Boss 302 is at the house in the garage awaiting the new owner to pay it off and pick it up.. Sold it on the Boss Mustang Message board.. Yes I did get my asking price.. Although I think I should of asked more! LOL...

03-05-2007, 01:27 AM	#47
wannabelow Registered User Join Date: Oct 2006 Location: calgary Posts: 224	Re: progress pics of the motorhome any up date on this darren or did it get put on the back burner Last edited by wannabelow; 03-05-2007 at 01:27 AM.

03-05-2007, 01:30 AM	#48
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: progress pics of the motorhome Nice work! Looks like you can start a business redoing old campers. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-22-2009, 06:46 PM	#49
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: progress pics of the motorhome Unfortunately this is now for sale, great project for someone with the talent and the time. WILLING TO DEAL TO HAVE THIS GO TO SOMEONE WHO WILL GIVE IT SOME LOVE THAT IT DESERVES. Darren __________________ 67- 72 Parts collecter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.