351 V6 questions - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy_fatman · 03-22-2006, 10:01 PM

wow! 5 months old thread

Longhorn Man · 03-22-2006, 10:31 PM

LOL, i didn't even notice that Paul! There's been a few pulled out of the closet tonight.

dougs69c10 · 03-22-2006, 11:37 PM

Quote:

Originally Posted by TP from Cntl PA

Most parts you can still get other than items like crank, block, cam, and heads, big stuff in other words.

thats odd, I just found 4 suppliers for a customer of mine that has a 478 v6 to rebuild, I can get blocks, cranks, rods pistons, bearings, gaskets, intakes, carbs, valves, and on and on and on for these motors. Hell 1400 bucks puts all new pieces in a old block with reworked heads in my machine shop

**Bob B.** · 03-23-2006, 02:07 AM

If you have a source for pistons, I would greatly appreciate a contact. I have a friend with a 478, and have not had much luck finding slugs for it.

dougs69c10 · 03-23-2006, 08:25 AM

Quote:

Originally Posted by Bob B.

If you have a source for pistons, I would greatly appreciate a contact. I have a friend with a 478, and have not had much luck finding slugs for it.

ill get you the number today,

**special-K** · 03-23-2006, 08:31 AM

LOL,I thought Americanrider was thinking about yet another V6 GMC.I was going to say,"just go and get yourself a V6 fer cryin`out loud!"Then I saw,old post,very educational.I got to show what I don`t know

.

**Bob B.** · 03-23-2006, 09:17 PM

Quote:

Originally Posted by dougs69c10

ill get you the number today,

Thanks! Bob.

dougs69c10 · 03-23-2006, 10:13 PM

Quote:

Originally Posted by Bob B.

Thanks! Bob.

205-323-1593

seminole supply company, they are out of birmingham, alabama

chevy_fatman · 03-24-2006, 12:59 AM

Quote:

Originally Posted by Longhorn Man

LOL, i didn't even notice that Paul! There's been a few pulled out of the closet tonight.

Wonder what will happen if I dug up a thread from our ol' friend Randy from back in the day.

03-22-2006, 10:01 PM	#26
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: 351 V6 questions wow! 5 months old thread __________________ Paul How do you make the invisible, visible?.........You take it away.

03-22-2006, 10:31 PM	#27
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 351 V6 questions LOL, i didn't even notice that Paul! There's been a few pulled out of the closet tonight.

03-23-2006, 02:07 AM	#29
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,363	Re: 351 V6 questions If you have a source for pistons, I would greatly appreciate a contact. I have a friend with a 478, and have not had much luck finding slugs for it. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

03-23-2006, 08:31 AM	#31
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 351 V6 questions LOL,I thought Americanrider was thinking about yet another V6 GMC.I was going to say,"just go and get yourself a V6 fer cryin`out loud!"Then I saw,old post,very educational.I got to show what I don`t know. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.