68 K20 Four speed with a HUGE Rockwell T-case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 10-30-2005, 10:55 PM

Located in NH. Finished ripping apart a K20 today. I needed the front clip. I am hauling the rest off to the bone yard shortly.

Tranny shifted well, for the >1 mile I drove it. Had a decent clutch in front of it. 283 ran well and is now going into a buddies' t-bucket.

Rockwell is IMMENSE.

Comes with front and rear driveshafts for a k20 longbed.

300 plus the ride. I can throw it on a pallet and ship Amtrak freight. It's pretty cheap.

*FormerMember* · 11-04-2005, 12:42 PM

bumpity bump bump...

Americanrider · 11-04-2005, 12:53 PM

PM sent

*FormerMember* · 11-17-2005, 11:21 PM

Still got it.

qksilver · 11-17-2005, 11:38 PM

How about putting that front end on a pallet instead!
I keep getting my 67 one piece at a time. The problem is I have to take the rest of the truck. ^ so far but getting closer
Steve

*FormerMember* · 11-17-2005, 11:41 PM

I can do that. It's a 4.10 closed knuckle drum braked D44.

I also have an open knuckle 3.73 10B with disks.

*FormerMember* · 11-22-2005, 01:30 PM

I really want to get rid of this here thang.

*FormerMember* · 12-05-2005, 06:18 PM

ttt

**John Fabris** · 12-05-2005, 06:39 PM

Hi grendel,

Was that 68 K20 manual steering?
I don't even know if there is such a thing as powersteering on the 67-68 4x4...

*FormerMember* · 12-05-2005, 08:49 PM

Quote:

Originally Posted by John Fabris

Hi grendel,

Was that 68 K20 manual steering?
I don't even know if there is such a thing as powersteering on the 67-68 4x4...

No, it was power steering. Looked factory, but who knows on one of these trucks with close to 40 years of history?

**John Fabris** · 12-05-2005, 10:15 PM

Do you still have any of the powersteering parts? (gearbox, pittman arm, steering arm on top of the knuckle)

*FormerMember* · 12-05-2005, 11:51 PM

Quote:

Originally Posted by John Fabris

Do you still have any of the powersteering parts? (gearbox, pittman arm, steering arm on top of the knuckle)

Sorry man, I sold off the box and gave away the chassis.

It's been gone for a bit.

shelby987 · 12-06-2005, 08:44 AM

I got them there parts!

jumped on them as soon as I saw mention of parting this truck.....

here's a ttt for a good seller!

wibilly · 12-06-2005, 10:02 AM

grendel somone said you may have 12'' backing plates for a ho 52

*FormerMember* · 12-06-2005, 07:31 PM

Sorry, the truck had a D60 in it and it's long gone.

*FormerMember* · 12-20-2005, 12:35 AM

I really want this sucker gone!

86SILVERADO · 12-20-2005, 12:45 AM

O.K. Grendel Am up late as well and confused in general but mostly about what it is exactly you have now that you need to get rid of..........Thanks

*FormerMember* · 12-20-2005, 12:47 AM

Quote:

Originally Posted by 86SILVERADO

O.K. Grendel Am up late as well and confused in general but mostly about what it is exactly you have now that you need to get rid of..........Thanks

The 4 speed granny transmission with t-case and drivelines that are from a 1968 Chevy K20.

(I am up late, too)

86SILVERADO · 12-20-2005, 12:58 AM

Ahhh. Right, When in doubt go back to the original post I guess. Have been contemplating a 4x conversion on the dump... I know it shouldn't be an sm420 but just thought I would ask....

*FormerMember* · 12-20-2005, 01:04 AM

Quote:

Originally Posted by 86SILVERADO

Ahhh. Right, When in doubt go back to the original post I guess. Have been contemplating a 4x conversion on the dump... I know it shouldn't be an sm420 but just thought I would ask....

I am told that it is an SM420.

However, I can't tell the difference between an SM420 and a SM465.

Still a good transmission with a decent t-case and driveshafts for the money

*FormerMember* · 12-24-2005, 11:18 AM

It's a 465. I have a PTO for it, too.

*FormerMember* · 02-02-2006, 10:34 AM

bump...

SM465 with a Rockwell 221(?)

*FormerMember* · 03-07-2006, 10:01 AM

get this thang outta here!

10-30-2005, 10:55 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	68 K20 Four speed with a HUGE Rockwell T-case Located in NH. Finished ripping apart a K20 today. I needed the front clip. I am hauling the rest off to the bone yard shortly. Tranny shifted well, for the >1 mile I drove it. Had a decent clutch in front of it. 283 ran well and is now going into a buddies' t-bucket. Rockwell is IMMENSE. Comes with front and rear driveshafts for a k20 longbed. 300 plus the ride. I can throw it on a pallet and ship Amtrak freight. It's pretty cheap.

11-04-2005, 12:42 PM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case bumpity bump bump...

11-04-2005, 12:53 PM	#3
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 68 K20 Four speed with a HUGE Rockwell T-case PM sent

11-17-2005, 11:21 PM	#4
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case Still got it.

11-17-2005, 11:38 PM	#5
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 68 K20 Four speed with a HUGE Rockwell T-case How about putting that front end on a pallet instead! I keep getting my 67 one piece at a time. The problem is I have to take the rest of the truck. ^ so far but getting closer Steve

11-17-2005, 11:41 PM	#6
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case I can do that. It's a 4.10 closed knuckle drum braked D44. I also have an open knuckle 3.73 10B with disks.

11-22-2005, 01:30 PM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case I really want to get rid of this here thang.

12-05-2005, 06:18 PM	#8
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case ttt

12-05-2005, 06:39 PM	#9
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 68 K20 Four speed with a HUGE Rockwell T-case Hi grendel, Was that 68 K20 manual steering? I don't even know if there is such a thing as powersteering on the 67-68 4x4... __________________ John Fabris 67 C10 SWB

12-05-2005, 10:15 PM	#11
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 68 K20 Four speed with a HUGE Rockwell T-case Do you still have any of the powersteering parts? (gearbox, pittman arm, steering arm on top of the knuckle) __________________ John Fabris 67 C10 SWB

12-06-2005, 08:44 AM	#13
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: 68 K20 Four speed with a HUGE Rockwell T-case I got them there parts! jumped on them as soon as I saw mention of parting this truck..... here's a ttt for a good seller! __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM! Last edited by shelby987; 12-06-2005 at 08:44 AM.

12-06-2005, 10:02 AM	#14
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: 68 K20 Four speed with a HUGE Rockwell T-case grendel somone said you may have 12'' backing plates for a ho 52 __________________ common sense isn't so common anymore

12-06-2005, 07:31 PM	#15
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case Sorry, the truck had a D60 in it and it's long gone.

12-20-2005, 12:35 AM	#16
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case I really want this sucker gone!

12-20-2005, 12:45 AM	#17
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Re: 68 K20 Four speed with a HUGE Rockwell T-case O.K. Grendel Am up late as well and confused in general but mostly about what it is exactly you have now that you need to get rid of..........Thanks __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!



Register or Log In To remove these advertisements.

12-20-2005, 12:58 AM	#19
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Re: 68 K20 Four speed with a HUGE Rockwell T-case Ahhh. Right, When in doubt go back to the original post I guess. Have been contemplating a 4x conversion on the dump... I know it shouldn't be an sm420 but just thought I would ask.... __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

12-24-2005, 11:18 AM	#21
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case It's a 465. I have a PTO for it, too.

02-02-2006, 10:34 AM	#22
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case bump... SM465 with a Rockwell 221(?)

03-07-2006, 10:01 AM	#23
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 68 K20 Four speed with a HUGE Rockwell T-case get this thang outta here!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.