Recently acquired: 1968 C60 NAPCO 4wd.... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodridge · 03-22-2006, 10:22 PM

Glad you finally got it home, now you can go out and really play! Does any one know if NAPCO did conversions on any other makes? There are 3 big F series close by that are 4X4.

Rod · 03-22-2006, 10:50 PM

http://www.napco4x4.org/ site for info for yah there woodridge

da-burb · 03-23-2006, 12:26 AM

Bruce, I am so glad you got that! I have been watching it in my Wisc trader mag for 3 weeks now.

I have a line on something you might want. take a look and let me know. I don't know the price but condition is sweet and it has a 427 under the hood.

**Canadian694x4** · 03-23-2006, 12:33 AM

That's a Wicked Wicked Truck! Great Find!

project1971 · 03-23-2006, 12:36 AM

man that is the coolest thing i have seen in a long time! i like it!

da-burb · 03-23-2006, 12:42 AM

Bruce, the truck in my post above is a 1972. This truck is also a NAPCO and it is in the same yard. That and another big wheeled rig a little older than yours.

HotRod71 · 03-23-2006, 12:44 AM

Quote:

Originally Posted by 1969k10stepside

That thing is huge ,what kind of tires are on it?

Those would be 52" Michelins, used on a lot of Military vehicles. One dang BIG tire.

Jerry Jones · 03-23-2006, 12:58 AM

I must say I am a

I would love that thing in my fleet. great find man. Keep us posted if you get any more pics

69-350 · 03-23-2006, 01:15 AM

now that's bad a$$, straight to the bone,

I wish I had a beast that big! I could really use something like that around some places here...

*Jr_Blazer_Boy* · 03-23-2006, 02:12 AM

Now,, that is a great looking truck! Never wash off the mud!

72freak · 03-23-2006, 06:45 AM

Quote:

Originally Posted by sakohntr

Yes, its true. I hired a lowboy to truck it home the 300 miles but shes in my yard. Now, shes no cream-puff but there is tons of potential. It is factory napco conversion. The original owner was a feedmill in Loyal Wisconsin. Supposedly a fertilizer truck. Came equiped with a BigBlock (size yet to be determined). 5speed trani. Divorced transfer case. Wet knuckle with drum brakes. Power steering (ram assist) and power vacuum brakes. Has one buddy bucket in it but the framework has been cobbled so i dont know if there should of been two. The cab is pretty bad around the roof where the marker lights leaked. Somebody butchered the clip to accomodate the 52 inch tires. It has 2 operational rear pto outputs. One on the trani and one on the transfer case. Originally was a dual rear wheel unit but the current tires dont allow enough room. It runs and drives nice but has been severly neglected. I hope to give it a "joesjunk" level restoration down the road after my kids get older. Until then it will be throwing dirt in the back 40 for a spell.
And to think the last guy was glad to see it leave (hes a FORD GUY). I cant count all the thumbs up we got trailering it home......... More pics to come!

I think the big block version was a 427

**special-K** · 03-23-2006, 08:51 AM

W O W !!!!!!
The 427 trucks said 427 on the louvers.I had a`67 C/50 that had 1 louver and a 366.Here`s a newer body on an older frame I`d like to put a 67/72 body on.Does the axle look the same?:

*FormerMember* · 03-23-2006, 09:14 AM

I want one!

BobS · 03-23-2006, 11:27 AM

Cool truck, which transfer case does it have?

Bob

**Yukon Jack** · 03-23-2006, 02:21 PM

That is very cool. You must get more pics of the axles and drivetrain posted. It kinda looks like a prior owner installed short lift blocks on the front axle. When you get around to it, inspect that as lift blocks on a steering axle aren't a good idea. Those may be pinned to the leaf pack or welded, but still look into that.

What a cool find!!!

krue · 03-23-2006, 02:27 PM

That thing is HUGE! I like it!

irongun324 · 03-23-2006, 03:12 PM

I concur with everyone else, that is one awesome truck. What I don't get is why it isn't in the middle of that field of snow yet...

sakohntr · 03-23-2006, 04:26 PM

Special- your axle has air brakes. Mine are hydraulic
BobS- I would like to stop by and see your fleet.....
Yukon and others- I will take more pics when it warms up and i can wash off the mud underneath to see what all is there.

lilred67 · 03-23-2006, 06:36 PM

Quote:

Originally Posted by clay68c10

The only way that beast would look better is if it was driving over a riced out civic (or 2). That's cooler than a Unimog.....

lmao.... that is one bad a$$ truck.i want one!!!!!

**Joesjunk** · 03-23-2006, 07:04 PM

How cool!!! I like it. Is it lifted? Or is that a stock height?? Now, if you are going to do it like mine it will have to be Black!!!!!

sakohntr · 03-23-2006, 07:27 PM

Joe, it has been lifted. Not pretty but functioning. And as far as color goes, I was thinking ochre. The original white with green interior aint gonna cut it.
There are lift blocks but those are gonna come out when i do the frame-off. Toomuchstuff has a picture of a napco in his silver book. I want to see how high these sat originally. Should have a better choice of tire than back then.

**Joesjunk** · 03-23-2006, 08:17 PM

It should look pretty good sitting back at stock height. I have a friend that has a 72 1ton napco 4x4, and it sits pretty high.

FRENCHBLUE72 · 03-23-2006, 11:10 PM

Bad Azz!!!!!

84 400 · 03-24-2006, 01:34 AM

nice man that thing is hudge
add it to your sig

jc · 03-24-2006, 03:50 AM

just in case you need some tires for that THING!!!!
this guy has tons .
http://cgi.ebay.com/ebaymotors/GROVE...QQcmdZViewItem

03-22-2006, 10:22 PM	#26
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Glad you finally got it home, now you can go out and really play! Does any one know if NAPCO did conversions on any other makes? There are 3 big F series close by that are 4X4. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

03-22-2006, 10:50 PM	#27
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Recently acquired: 1968 C60 NAPCO 4wd.... http://www.napco4x4.org/ site for info for yah there woodridge __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

03-23-2006, 12:26 AM	#28
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Bruce, I am so glad you got that! I have been watching it in my Wisc trader mag for 3 weeks now. I have a line on something you might want. take a look and let me know. I don't know the price but condition is sweet and it has a 427 under the hood. Attached Images __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

03-23-2006, 12:33 AM	#29
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Recently acquired: 1968 C60 NAPCO 4wd.... That's a Wicked Wicked Truck! Great Find! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-23-2006, 12:36 AM	#30
project1971 Registered User Join Date: Apr 2003 Location: Oklahoma City Posts: 605	Re: Recently acquired: 1968 C60 NAPCO 4wd.... man that is the coolest thing i have seen in a long time! i like it! __________________ 2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver)

03-23-2006, 12:42 AM	#31
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Bruce, the truck in my post above is a 1972. This truck is also a NAPCO and it is in the same yard. That and another big wheeled rig a little older than yours. Attached Images

03-23-2006, 12:58 AM	#33
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: Recently acquired: 1968 C60 NAPCO 4wd.... I must say I am a I would love that thing in my fleet. great find man. Keep us posted if you get any more pics __________________ RIP El Jay! Love you brother!

03-23-2006, 01:15 AM	#34
69-350 Oil trash and damn proud of it Join Date: Aug 2005 Location: Williston, ND Posts: 1,993	Re: Recently acquired: 1968 C60 NAPCO 4wd.... now that's bad a$$, straight to the bone, I wish I had a beast that big! I could really use something like that around some places here... __________________ Mark 1997 K1500 Z71, 14 bolt SF 3.73 posi, Bright Blue Metallic. 6" Superlift 1972 C-10, toolbox, p/s, 350/TH350/3.73 open, black int., bronze 2008 Dodge MegaCab. H&S tuned 6.7 Cummins. Fast Four Tons Some of my pics http://s107.photobucket.com/albums/m294/69-350/ Last edited by 69-350; 03-23-2006 at 01:17 AM.

03-23-2006, 02:12 AM	#35
Jr_Blazer_Boy Account Suspended Join Date: Dec 2005 Location: Applegate Oregon Posts: 56	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Now,, that is a great looking truck! Never wash off the mud!

03-23-2006, 08:51 AM	#37
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Recently acquired: 1968 C60 NAPCO 4wd.... W O W !!!!!! The 427 trucks said 427 on the louvers.I had a`67 C/50 that had 1 louver and a 366.Here`s a newer body on an older frame I`d like to put a 67/72 body on.Does the axle look the same?: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-03-2012 at 07:11 AM.

03-23-2006, 09:14 AM	#38
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Recently acquired: 1968 C60 NAPCO 4wd.... I want one!

03-23-2006, 11:27 AM	#39
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Cool truck, which transfer case does it have? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

03-23-2006, 02:21 PM	#40
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Recently acquired: 1968 C60 NAPCO 4wd.... That is very cool. You must get more pics of the axles and drivetrain posted. It kinda looks like a prior owner installed short lift blocks on the front axle. When you get around to it, inspect that as lift blocks on a steering axle aren't a good idea. Those may be pinned to the leaf pack or welded, but still look into that. What a cool find!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-23-2006, 02:27 PM	#41
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Recently acquired: 1968 C60 NAPCO 4wd.... That thing is HUGE! I like it! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-23-2006, 03:12 PM	#42
irongun324 Registered User Join Date: Jun 2005 Location: Huntsville, AL Posts: 133	Re: Recently acquired: 1968 C60 NAPCO 4wd.... I concur with everyone else, that is one awesome truck. What I don't get is why it isn't in the middle of that field of snow yet... __________________ My vehicles: 2003 Saturn ION 1 1988 V10 Suburban 4x4 Dad's: 68 C10 Stepside (work truck condition, runs though) 59 Apache Fleetside (rusted pile of metal - hopefully soon to be father/son project when he cleans out his garage!) Can see all three of these here



Register or Log In To remove these advertisements.

03-23-2006, 04:26 PM	#43
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Special- your axle has air brakes. Mine are hydraulic BobS- I would like to stop by and see your fleet..... Yukon and others- I will take more pics when it warms up and i can wash off the mud underneath to see what all is there. __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

03-23-2006, 07:04 PM	#45
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Re: Recently acquired: 1968 C60 NAPCO 4wd.... How cool!!! I like it. Is it lifted? Or is that a stock height?? Now, if you are going to do it like mine it will have to be Black!!!!! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

03-23-2006, 07:27 PM	#46
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Joe, it has been lifted. Not pretty but functioning. And as far as color goes, I was thinking ochre. The original white with green interior aint gonna cut it. There are lift blocks but those are gonna come out when i do the frame-off. Toomuchstuff has a picture of a napco in his silver book. I want to see how high these sat originally. Should have a better choice of tire than back then. __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

03-23-2006, 08:17 PM	#47
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,705	Re: Recently acquired: 1968 C60 NAPCO 4wd.... It should look pretty good sitting back at stock height. I have a friend that has a 72 1ton napco 4x4, and it sits pretty high. __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

03-23-2006, 11:10 PM	#48
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Recently acquired: 1968 C60 NAPCO 4wd.... Bad Azz!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-24-2006, 01:34 AM	#49
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: Recently acquired: 1968 C60 NAPCO 4wd.... nice man that thing is hudge add it to your sig __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-24-2006, 03:50 AM	#50
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: Recently acquired: 1968 C60 NAPCO 4wd.... just in case you need some tires for that THING!!!! this guy has tons . http://cgi.ebay.com/ebaymotors/GROVE...QQcmdZViewItem __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.