Ron Francis wiring harness? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 08-30-2006, 11:16 PM

Dude ... let it go before you get this thread locked. Jeesh.

BigMike · 08-30-2006, 11:37 PM

Hey guys, thought it would be interesting to see who installed what so I started a POLL...check it out Poll

Mike

Radman · 08-31-2006, 09:13 PM

I guess it comes down to personal taste. I have installed them both and i prefer ron francis set up. The instructions for both make them a no brainer. I just preferred rons cool looking fuse panel over a stock looking set up. The way the wires are bundled also make it easier to make a trick looking wire system. Your choice i guess.

BigMike · 08-31-2006, 09:26 PM

Quote:

Originally Posted by Radman

I guess it comes down to personal taste. I have installed them both and i prefer ron francis set up. The instructions for both make them a no brainer. I just preferred rons cool looking fuse panel over a stock looking set up. The way the wires are bundled also make it easier to make a trick looking wire system. Your choice i guess.

You don't have any installed pictures do you?

Mike

edmonton72 · 09-01-2006, 12:06 AM

How much of a direct fit are these wiring harnesses in our trucks. I was also wondering if you can get the harness to already come wired to run a HEI ignition, one-wire alternator and stuff like that.

BigMike · 09-01-2006, 01:38 AM

Quote:

Originally Posted by edmonton72

How much of a direct fit are these wiring harnesses in our trucks. I was also wondering if you can get the harness to already come wired to run a HEI ignition, one-wire alternator and stuff like that.

My Painless setup is for the 1-wire alt and HEI already. There are other options available as well. I think Ron Francis actually makes the harness to your specifications (at least that was the way I read it)

Here are some links for you guys:

American Autowire - www.americanautowire.com

Painless - www.painlessperformance.com

GEM - www.gemstreetrods.com

EZ-Wire - www.ezwiring.com

M&H - wiringharness.com

Ron Francis - www.ronfrancis.com

EZ2Wire - Seems they only have an eBay store, tried for 20 minutes to find a regular EZ2Wire website to no avail. They say it keeps cost down - http://stores.ebay.com/EZ2Wire

Hopefully these sites will help you to make the decision that works best for your situation. Do your research as some have better instructions than others. Some have great customer support that you can speak with a live person to help troubleshoot. Some even have a lifetime guarantee.

Mike

*Shane* · 09-01-2006, 03:14 PM

I think American AutoWire manufactures the EZ2Wire kits. I think they only sell their EZ2Wire kits on Ebay though.

08-30-2006, 11:16 PM	#26
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Ron Francis wiring harness? Dude ... let it go before you get this thread locked. Jeesh.

08-30-2006, 11:37 PM	#27
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: Ron Francis wiring harness? Hey guys, thought it would be interesting to see who installed what so I started a POLL...check it out Poll Mike __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies

08-31-2006, 09:13 PM	#28
Radman Registered User Join Date: May 2005 Location: estevan,Sask. Canada Posts: 140	Re: Ron Francis wiring harness? I guess it comes down to personal taste. I have installed them both and i prefer ron francis set up. The instructions for both make them a no brainer. I just preferred rons cool looking fuse panel over a stock looking set up. The way the wires are bundled also make it easier to make a trick looking wire system. Your choice i guess.

09-01-2006, 12:06 AM	#30
edmonton72 Nothings as cool as my 72 Join Date: May 2005 Location: Edmonton, AB, Kanuckastan Posts: 181	Re: Ron Francis wiring harness? How much of a direct fit are these wiring harnesses in our trucks. I was also wondering if you can get the harness to already come wired to run a HEI ignition, one-wire alternator and stuff like that. __________________ 1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding.

09-01-2006, 03:14 PM	#32
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Ron Francis wiring harness? I think American AutoWire manufactures the EZ2Wire kits. I think they only sell their EZ2Wire kits on Ebay though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.