Misc. parts F/S - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blue 71 · 12-01-2006, 02:58 PM

would you take $25 shipped to 72022 on the bumper guards,
also do you have an ac condensor, how much.

thanks richard

BowTieOgre · 12-01-2006, 03:33 PM

Quote:

Originally Posted by blue 71

would you take $25 shipped to 72022 on the bumper guards,
also do you have an ac condensor, how much.

thanks richard

I will take $25 shipped and yes I do have a condenser, I will get a pic up tomorrow.

neal · 12-01-2006, 08:37 PM

I'm grounded till I find a pully for my sagniaw p/s pump. I'm here in Pensacola also. I'm going up to burger king tommrow evening. Do you go up there?

BowTieOgre · 12-01-2006, 11:07 PM

I have wanted to ever since a buddy of mine at the office (who has a Lemans and a few C4s) mentioned it. If I can get the HEI in my Blazer in time I might ride up there. I dont have anything to help you out but I would love to hang out and shoot the ****e.

neal · 12-02-2006, 12:19 PM

I'm at 969-1961

**70STOVEBOLT** · 12-02-2006, 01:02 PM

Are the wheelwells sold? If not, put me in line for them. Also, could you PM me some more pics of the tailgate, I'm very interested if it's not bowed and doesn't have a lot of bondo/filler.

Thanks,
Stovebolt

daves71k5 · 12-03-2006, 12:18 PM

Interested in tailgate, does it have any bow to it? would like more pics if possible of it. Is there much filler in it ? Can send out money tomorrow if in good enough shape. thanks Dave

BowTieOgre · 12-03-2006, 02:42 PM

Quote:

Originally Posted by daves71k5

Interested in tailgate, does it have any bow to it? would like more pics if possible of it. Is there much filler in it ? Can send out money tomorrow if in good enough shape. thanks Dave

There is no bow to it but it does have some mud on the lower potion on the inside. A PO must have done it but I stripped all the old paint off of it and sealed it with plans on sanding it all down and using it on my truck but im not going the fleetside route anymore.

Here is a pic just before I bought it.

And here is a pic of the worst of the mud.

blue 71 · 12-04-2006, 12:59 AM

pm sent on bumper guards & condensor

IvelDesigns · 12-16-2006, 03:08 AM

can you get me a pic of the "Longbed lower drivers side rear corner patch panel"? I'm assuming you're talking about behind the rear wheel, below the body line. if so, what's shipping on that to 50325?

I also want the c-notch if it has all of the bolts and install directions. (not to worried about the directions)

BowTieOgre · 12-18-2006, 02:58 PM

I will get a pic up in the next day or so but yes it is for a longbed from the wheel opening to the rear from the body line down.

tallhoedude · 12-18-2006, 03:44 PM

How About A Set Of Doors To Summitville,in 46070.got Any More Pics Of Doors?thanks

IvelDesigns · 12-19-2006, 01:21 AM

Quote:

Originally Posted by BowTieOgre

I will get a pic up in the next day or so but yes it is for a longbed from the wheel opening to the rear from the body line down.

perfect. I'll take it and the notch. send me a PM with the pic and payment info.

thanks!!

BowTieOgre · 12-19-2006, 10:01 AM

Im sorry Ivel, I was mistaken. (ive been sick lately) The bed patch panel is for the passenger side. I have one for the drivers side but half of it was cut off and used. I need to get some pics up tonight.

Tallhoedude - I can get some pics up but I really dont think it would be worth it to ship the doors and its a real PITA to get something like that packaged up.

IvelDesigns · 12-19-2006, 11:00 PM

Quote:

Originally Posted by BowTieOgre

Im sorry Ivel, I was mistaken. (ive been sick lately) The bed patch panel is for the passenger side. I have one for the drivers side but half of it was cut off and used. I need to get some pics up tonight.

Tallhoedude - I can get some pics up but I really dont think it would be worth it to ship the doors and its a real PITA to get something like that packaged up.

All i really need is 5 inches of the panel for the driver side. that's 5 inches starting from the wheel well end of the panel. If you have that half, take a pic and send it to me. i'll still take it if it's what i need.

**Hart_Rod** · 12-19-2006, 11:18 AM

Kris - Long time no see!!! Sorry to hear you've been sick. I'll jump in line for the notch in case someone passes on it. I'll be at the shop most of next week trying to make some progress on the Burb. Come by if you get a chance.

Rob

BowTieOgre · 12-19-2006, 12:29 PM

Quote:

Originally Posted by Hart_Rod

Kris - Long time no see!!! Sorry to hear you've been sick. I'll jump in line for the notch in case someone passes on it. I'll be at the shop most of next week trying to make some progress on the Burb. Come by if you get a chance.

Rob

Yeah I know man, its been a while. Between work, the 1 year old, the holidays and BOTH the truck projects most of my extra time has been occupied with sleep. Glad to hear you are trucking along on the Burb. I will make it out as soon as I can!

If IvelDesigns passes on the notch then its yours.

IvelDesigns · 12-20-2006, 01:14 PM

heh, np. I'll PM you to get the payment/shipping details on the notch worked out.

Midlothian Electric · 12-20-2006, 08:17 PM

How About A Set Of Doors To Richmond, VA 23236, got any more Pics Of Doors? Is the tailgait still availible. thanks

**LockDoc** · 12-20-2006, 09:16 PM

Kris,

If you still have the '70 Brake booster/MC/bracket for drums - $25, could you post a picture of it? Do you know if the booster is good or not? Thanks.

LockDoc

BowTieOgre · 12-21-2006, 01:55 AM

MidElec - I can post better pics of doors if you like but im willing to bet the shipping would be twice what im selling the doors for. Unfortunately the tailgate is no longer available.

LockDoc - I will put up some pics after the holiday weekend. When I bought the truck it had no engine/trans so i could road test it but backing off the trailer the brakes worked just fine. I will take a close look at it this weekend and get back with you.

65-72 chevytoys · 12-21-2006, 02:03 PM

Do you still have the trans crossmember and inner bed fenders? If so how much to 32092?

BowTieOgre · 12-21-2006, 02:26 PM

Quote:

Originally Posted by 65-72 chevytoys

Do you still have the trans crossmember and inner bed fenders? If so how much to 32092?

The wheelwells are sold as well as the trans xmem. I think I saw another thread with a trans xmem around here tho...maybe billsbowtie?

65-72 chevytoys · 12-21-2006, 02:30 PM

OK thanks anyway.

**LockDoc** · 12-21-2006, 02:44 PM

Thanks Kris, that will be fine.

LockDoc

Quote:

LockDoc - I will put up some pics after the holiday weekend. When I bought the truck it had no engine/trans so i could road test it but backing off the trailer the brakes worked just fine. I will take a close look at it this weekend and get back with you.

12-01-2006, 02:58 PM	#1
blue 71 Member Join Date: Jun 2005 Location: Bryant, Arkansas Posts: 56	Re: Misc. parts F/S would you take $25 shipped to 72022 on the bumper guards, also do you have an ac condensor, how much. thanks richard

12-01-2006, 08:37 PM	#3
neal New Member Join Date: Oct 2006 Location: pensacola florida Posts: 14	Re: Misc. parts F/S I'm grounded till I find a pully for my sagniaw p/s pump. I'm here in Pensacola also. I'm going up to burger king tommrow evening. Do you go up there?

12-01-2006, 11:07 PM	#4
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Misc. parts F/S I have wanted to ever since a buddy of mine at the office (who has a Lemans and a few C4s) mentioned it. If I can get the HEI in my Blazer in time I might ride up there. I dont have anything to help you out but I would love to hang out and shoot the ****e. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

12-02-2006, 12:19 PM	#5
neal New Member Join Date: Oct 2006 Location: pensacola florida Posts: 14	Re: Misc. parts F/S I'm at 969-1961

12-02-2006, 01:02 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: Misc. parts F/S Are the wheelwells sold? If not, put me in line for them. Also, could you PM me some more pics of the tailgate, I'm very interested if it's not bowed and doesn't have a lot of bondo/filler. Thanks, Stovebolt __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-03-2006, 12:18 PM	#7
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Misc. parts F/S Interested in tailgate, does it have any bow to it? would like more pics if possible of it. Is there much filler in it ? Can send out money tomorrow if in good enough shape. thanks Dave

12-04-2006, 12:59 AM	#9
blue 71 Member Join Date: Jun 2005 Location: Bryant, Arkansas Posts: 56	Re: Misc. parts F/S pm sent on bumper guards & condensor

12-16-2006, 03:08 AM	#10
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Misc. parts F/S can you get me a pic of the "Longbed lower drivers side rear corner patch panel"? I'm assuming you're talking about behind the rear wheel, below the body line. if so, what's shipping on that to 50325? I also want the c-notch if it has all of the bolts and install directions. (not to worried about the directions) __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

12-18-2006, 02:58 PM	#11
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Misc. parts F/S I will get a pic up in the next day or so but yes it is for a longbed from the wheel opening to the rear from the body line down. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

12-18-2006, 03:44 PM	#12
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Misc. parts F/S How About A Set Of Doors To Summitville,in 46070.got Any More Pics Of Doors?thanks __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

12-19-2006, 10:01 AM	#14
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Misc. parts F/S Im sorry Ivel, I was mistaken. (ive been sick lately) The bed patch panel is for the passenger side. I have one for the drivers side but half of it was cut off and used. I need to get some pics up tonight. Tallhoedude - I can get some pics up but I really dont think it would be worth it to ship the doors and its a real PITA to get something like that packaged up. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

12-19-2006, 11:18 AM	#16
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Misc. parts F/S Kris - Long time no see!!! Sorry to hear you've been sick. I'll jump in line for the notch in case someone passes on it. I'll be at the shop most of next week trying to make some progress on the Burb. Come by if you get a chance. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-20-2006, 01:14 PM	#18
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Misc. parts F/S heh, np. I'll PM you to get the payment/shipping details on the notch worked out. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

12-20-2006, 08:17 PM	#19
Midlothian Electric Registered User Join Date: Sep 2006 Location: Midlothian, VA Posts: 50	Re: Misc. parts F/S How About A Set Of Doors To Richmond, VA 23236, got any more Pics Of Doors? Is the tailgait still availible. thanks __________________ Quenton Lee Midlothian Electric Comapny Inc. Electrical Contractors Since 1965

12-20-2006, 09:16 PM	#20
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Misc. parts F/S Kris, If you still have the '70 Brake booster/MC/bracket for drums - $25, could you post a picture of it? Do you know if the booster is good or not? Thanks. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

12-21-2006, 01:55 AM	#21
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Misc. parts F/S MidElec - I can post better pics of doors if you like but im willing to bet the shipping would be twice what im selling the doors for. Unfortunately the tailgate is no longer available. LockDoc - I will put up some pics after the holiday weekend. When I bought the truck it had no engine/trans so i could road test it but backing off the trailer the brakes worked just fine. I will take a close look at it this weekend and get back with you. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads Last edited by BowTieOgre; 12-21-2006 at 01:57 AM.

12-21-2006, 02:03 PM	#22
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: Misc. parts F/S Do you still have the trans crossmember and inner bed fenders? If so how much to 32092?

12-21-2006, 02:30 PM	#24
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: Misc. parts F/S OK thanks anyway.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.