Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 04-06-2007, 02:05 PM

RED71: Yes, you are exactly right. There is more clearance because you are back further from that big crossmember. Stock 4spd trucks did place the v8 eng in the back position, so you should be able to run longer 45 degree pipes and clear the stock starter, like on the 4x4.

**Canadian694x4** · 04-06-2007, 06:28 PM

Sent you another PM...

rodstored-72 · 04-08-2007, 10:51 AM

pickmup do you still have a few sets (atleast 1 set) still available?? i have a friend that actually is rebuilding a vette & i think he might be interested.

thanks!!!
rodstored-72

olblue60@aol.com · 04-09-2007, 09:26 PM

Here comes paypal. Thanks Frank!!

uno67 · 04-10-2007, 06:55 PM

ttt

eric72 · 04-10-2007, 08:21 PM

sent you a pm

**PICKMUP** · 04-11-2007, 11:35 PM

WAIT--Don't send any more $$$
I ran out of manifolds and so did my distributor. So I am checking on resupply, but don't know yet.
I have everyone covered, except olblue. I will PM you for refund, or other alternatives.
Tim Young ordered two of the other side, as we have a few of those left. He said he will just tap & plug the 1/4" holes at the top & bottom of the little inside heat tube. They are otherwise the same manifold.
If anyone else would like two of the other side with the heat tube, let me know first and I will verify stock before you pay.
I will let everyone know when the next shipment is due.
Thanks again for all of the orders...Frank

1LoC10 · 04-14-2007, 03:27 PM

when do you think the next shipment will be ready, I want the whole setup with the pipes and all

1LoC10 · 04-15-2007, 12:15 AM

do you know what the part number is for that starter

**D.PASSMORE** · 04-15-2007, 02:25 PM

Frank,
Recieved the manifolds, perfect, thanks

**uncle** · 04-15-2007, 02:52 PM

Got mine. Thanks again.

Dano69c10 · 04-15-2007, 05:09 PM

How much for just;

Quote:

3. 45 degree mandrel bent aluminized pipes with welded flared ends?

Thanx
Dano

**PICKMUP** · 04-15-2007, 11:02 PM

No news-yet.
I don't have the starter part #, but it is the very common staggered GM mini starter. Check Ebay for some good deals.
I don't sell separate special parts, like the 45 pipes, from the "systems" I offer. It usually means someone wants to buy their common parts somewhere else, and just the hard stuff from me. I don't have time for that. I did explain how it was done, if you want to do it yourself.
Thanks everyone. I will stay in touch.

Dano69c10 · 04-16-2007, 08:59 PM

Sorry I asked. Didn't mean to want waste your time.
Some guys on this board can't weld and I already have a set of corvette exh manifolds.

1LoC10 · 04-16-2007, 11:22 PM

will they work with a 3 on the tree

3/4tonterror · 04-19-2007, 08:15 AM

ill take a et when you are ready. pm you

3/4tonterror · 04-19-2007, 08:16 AM

ill take a set when you are ready,pm you

3/4tonterror · 04-19-2007, 01:50 PM

Paypal Sent Thanks

1LoC10 · 04-19-2007, 03:27 PM

Quote:

Originally Posted by 3/4tonterror

Paypal Sent Thanks

I thought they were sold out?

3/4tonterror · 04-20-2007, 05:56 AM

1loc10, i bought 2 of the ones with a heat tube hole, passanger side.im just going to weld up the wole before i get the coated.i did the same thing to my factory ones.

rodstored-72 · 04-20-2007, 10:50 AM

pickmup,
do you have any left???

69c10stepside · 04-20-2007, 11:22 AM

I can tell you that my 95 sub has the mini-style starter on it as a point of reference..

3/4tonterror · 04-24-2007, 01:50 PM

I got mine today, love them, sent them out to get chromed, cant wait to get them on. thanks

msgross · 04-24-2007, 03:09 PM

please let me know when you get more in, I should have ordered earlier...

Mike

Phaedrus · 04-24-2007, 03:23 PM

Also definately interested when you get some more in!

04-06-2007, 02:05 PM	#26
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD RED71: Yes, you are exactly right. There is more clearance because you are back further from that big crossmember. Stock 4spd trucks did place the v8 eng in the back position, so you should be able to run longer 45 degree pipes and clear the stock starter, like on the 4x4.

04-06-2007, 06:28 PM	#27
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Sent you another PM... __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

04-08-2007, 10:51 AM	#28
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,009	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD pickmup do you still have a few sets (atleast 1 set) still available?? i have a friend that actually is rebuilding a vette & i think he might be interested. thanks!!! rodstored-72

04-09-2007, 09:26 PM	#29
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Here comes paypal. Thanks Frank!! __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

04-10-2007, 06:55 PM	#30
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD ttt

04-10-2007, 08:21 PM	#31
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD sent you a pm

04-11-2007, 11:35 PM	#32
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD WAIT--Don't send any more $$$ I ran out of manifolds and so did my distributor. So I am checking on resupply, but don't know yet. I have everyone covered, except olblue. I will PM you for refund, or other alternatives. Tim Young ordered two of the other side, as we have a few of those left. He said he will just tap & plug the 1/4" holes at the top & bottom of the little inside heat tube. They are otherwise the same manifold. If anyone else would like two of the other side with the heat tube, let me know first and I will verify stock before you pay. I will let everyone know when the next shipment is due. Thanks again for all of the orders...Frank

04-14-2007, 03:27 PM	#33
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD when do you think the next shipment will be ready, I want the whole setup with the pipes and all __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

04-15-2007, 12:15 AM	#34
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD do you know what the part number is for that starter __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

04-15-2007, 02:25 PM	#35
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Frank, Recieved the manifolds, perfect, thanks

04-15-2007, 02:52 PM	#36
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Got mine. Thanks again.

04-15-2007, 11:02 PM	#38
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD No news-yet. I don't have the starter part #, but it is the very common staggered GM mini starter. Check Ebay for some good deals. I don't sell separate special parts, like the 45 pipes, from the "systems" I offer. It usually means someone wants to buy their common parts somewhere else, and just the hard stuff from me. I don't have time for that. I did explain how it was done, if you want to do it yourself. Thanks everyone. I will stay in touch.

04-16-2007, 08:59 PM	#39
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Sorry I asked. Didn't mean to want waste your time. Some guys on this board can't weld and I already have a set of corvette exh manifolds. __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 04-18-2007 at 08:19 AM.

04-16-2007, 11:22 PM	#40
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD will they work with a 3 on the tree __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

04-19-2007, 08:15 AM	#41
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD ill take a et when you are ready. pm you



Register or Log In To remove these advertisements.

04-19-2007, 08:16 AM	#42
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD ill take a set when you are ready,pm you

04-19-2007, 01:50 PM	#43
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Paypal Sent Thanks

04-20-2007, 05:56 AM	#45
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD 1loc10, i bought 2 of the ones with a heat tube hole, passanger side.im just going to weld up the wole before i get the coated.i did the same thing to my factory ones.

04-20-2007, 10:50 AM	#46
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,009	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD pickmup, do you have any left???

04-20-2007, 11:22 AM	#47
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD I can tell you that my 95 sub has the mini-style starter on it as a point of reference.. __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

04-24-2007, 01:50 PM	#48
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD I got mine today, love them, sent them out to get chromed, cant wait to get them on. thanks

04-24-2007, 03:09 PM	#49
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD please let me know when you get more in, I should have ordered earlier... Mike __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-24-2007, 03:23 PM	#50
Phaedrus Registered User Join Date: Jun 2006 Location: Sioux Falls, SD Posts: 67	Re: Big 2.5" Vette Ram Manifolds---Fit 2WD! and 4WD Also definately interested when you get some more in!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.