Parts Yard Meets Metal Dumpster

[hgs_notes]

Chris H, that looks like an awesome deal. If you end up going to get it, let me know so you can bring back those old rock sliders from his crawler. If I didn't already have a jimmy project and a C-10 project, I would have to consider this burb also.

Good luck, VT

[Chevyman63]

Wow...that's a pretty nice parts truck!

[vtblazer]

Originally Posted by Chevyman63

Wow...that's a pretty nice parts truck!

Looks good in the pics but the floor is damn tender.
Fired right up, moved it and mowed the grass where it had been sitting.

Working on linking up all the pics, should be able to have it done by Thurs.

Went up and took another 50 pics, covers most of everything up there worth saving.

[FormerMember]

Originally Posted by vtblazer

Looks good in the pics but the floor is damn tender.
Fired right up, moved it and mowed the grass where it had been sitting.

Working on linking up all the pics, should be able to have it done by Thurs.

Went up and took another 50 pics, covers most of everything up there worth saving.

Kurt, do you think the Burb cab would be a good candidate for a Crew Cab conversion?

(thinking evil thoughts that will probably net me another project...)

[vtblazer]

Originally Posted by grendel

Kurt, do you think the Burb cab would be a good candidate for a Crew Cab conversion?

(thinking evil thoughts that will probably net me another project...)

Sure, it'd be a sweet set up but you'd need to replace the floor at a minimum.

[TooMany2count]

I'm about broke but I need a steering column for an automatic(68chevy) & I don't care if its a tilt or not, what kinda deal will you give w/shipping to 62206....joe

[vtblazer]

Originally Posted by TooMany2count

I'm about broke but I need a steering column for an automatic(68chevy) & I don't care if its a tilt or not, what kinda deal will you give w/shipping to 62206....joe

Only have one in the yard but popped my head into the garage attic and found three more.

$75.00 shipped sound reasonable?

[1970bowtie]

i need a good grille will take 69/70 71/72 shipped to 75754 thanks

[vtblazer]

Originally Posted by 1970bowtie

i need a good grille will take 69/70 71/72 shipped to 75754 thanks

Nothing great for the 69/70 but have a couple for 71/72.

You looking for "really nice" or just driver?

[Thealien]

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

[vtblazer]

Originally Posted by Thealien

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

Maybe if you have a trailer you could haul some of the bigger stuff south for those that may want parts?

These blazer doors aren't rust free, not trash but far from rust 'free'

Gerg72:
No tilts, used em all already

[vtblazer]

Originally Posted by Thealien

I now only need passenger side A/C vent and controls if you have

Cut down doors are OK if they have no rust, my doors are rust free but PO welded up the window frame.

Jack stuff

I am going to carlisle next weekend but could come up to pick stuff up the next week or weekend after if you/I can reach an agreement.

Thanks, I am not in a rush
Mark

Nothing for good A/C controls and the truck with the A/C dash, doesn't have the A/C vents.

Anything more I could do for ya?

[-Greg72]

Any 2WD 'Burbs for sale??? Looking for a red one, with 5-lug wheels....maybe a Panel would be cool?

What about serious question: Do you have a good quality tilt-column? I've been waiting for a Brothers Trucks backorder (about 2 months and counting)

[Thealien]

I have no trailer. I have a GMC Safari mini van. If I come to get some stuff from you I wouldn't mind bringing some stuff down here if they were to be picked up fairly quickly. I have no place for storage.

I guess I am down to just the jack stuff, maybe a filler tube, and any A/c vent parts?? which I could all fit in my motorcycle. I am still willing to help out a board member with bringing some stuff to Mass if it helps someone out?

Mark

[c-1072]

got a good blazer windshield frame or any other parts of interest for a blazer my cousin is coming up for a visit he lives near ya .are you still lookin for a short bed ? i got a driver one here might give me an excuse to come see ya .Take it easy
Todd

[vtblazer]

Originally Posted by c-1072

got a good blazer windshield frame or any other parts of interest for a blazer my cousin is coming up for a visit he lives near ya .are you still lookin for a short bed ? i got a driver one here might give me an excuse to come see ya .Take it easy
Todd

No 'good' windshield frames.

Could use the short bed.

What ever happened to the front clip we were talking about awhile back?

[c-1072]

Originally Posted by vtblazer

No 'good' windshield frames.

Could use the short bed.

What ever happened to the front clip we were talking about awhile back?

shoot me a pm to refresh my memory or give me a call tonight 585-749-5219
I bought a complete new bed so i got no use for this one . I could also use a set of solid doors to .i talk to ya later .

[hgs_notes]

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

[DennyB]

Originally Posted by hgs_notes

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

Mike, If VT can't help you out I'm sure I can.

[vtblazer]

Originally Posted by hgs_notes

I would like the black middle seat belt set and how much for those sport mirrors?

I'm also looking for a rebuildable 4 barrel carb, preferably a spreadbore. I'm not too particular on brand, as long as it is useable. Got any HEI distributors laying around? How about tranny coolers?

Mike

Sport mirrors. $30.00 shipped.

Found a 'couple' carbs for ya.
Have a favorite Q-jet number? Take your pick, have several of those.
From nasty looking to nice, all pretty complete though.
Shipping cost only for the nasty one, up to
$75.00 shipped for the nice one. (Q-jets)

One Holley 600cfm vac secondary. $50.00 shipped.
One Edelbrock. $60.00 shipped.
One old Carter. $40.00 shipped
One nice Carter 750cfm AFB Competition Series. $260.00 shipped.

No extra dizzy's but the pile is deep, so stay tuned.

No remote tranny coolers.

[hgs_notes]

Originally Posted by vtblazer

Sport mirrors. $30.00 shipped.

Found a 'couple' carbs for ya.
Have a favorite Q-jet number? Take your pick, have several of those.
From nasty looking to nice, all pretty complete though.
Shipping cost only for the nasty one, up to
$75.00 shipped for the nice one. (Q-jets)

One Holley 600cfm vac secondary. $50.00 shipped.
One Edelbrock. $60.00 shipped.
One old Carter. $40.00 shipped
One nice Carter 750cfm AFB Competition Series. $260.00 shipped.

No extra dizzy's but the pile is deep, so stay tuned.

No remote tranny coolers.

I'll take the mirrors and a carb. Here's what I'm looking for in a carb, complete with linkages, etc. nothing missing, choke assembly preferably electric, preferably manual secondaries and spreadbore mounting. Find me the cheapest thing you got that meets that and throw it in the box with those mirrors. Let me know how you want payment and it's done.

Mike

[vtblazer]

Originally Posted by hgs_notes

I'll take the mirrors and a carb. Here's what I'm looking for in a carb, complete with linkages, etc. nothing missing, choke assembly preferably electric, preferably manual secondaries and spreadbore mounting. Find me the cheapest thing you got that meets that and throw it in the box with those mirrors. Let me know how you want payment and it's done.

Mike

Okay, I'll 'fill the bill' and pm you with a total.
Thanks.

[02_GMC_97_FIII]

Will take the "TH-350 cover - $15.00 shipped". Am looking for a 67/68 front bumper so will pass on the bumper. Also would you happen to have a set of '72 longer style door latch controls?

Thanks-
Matt

[hgs_notes]

Originally Posted by vtblazer

Okay, I'll 'fill the bill' and pm you with a total.
Thanks.

I almost forgot, the black seat belts including middles. And blazer rear seat belts if you got'em.

[Pip]

Any pics of the '70 4x4 project?