A truck being a truck, let's see em. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rogergodding · 10-15-2007, 05:36 PM

managed to find another...... ran a load from dfw to san antonio ........

rogergodding · 10-15-2007, 05:39 PM

Quote:

Originally Posted by 67_C-30

Hell, I might even haul that in the cab!!!

yeah.... she's actually driven it a couple times......

67CHIP72 · 10-15-2007, 11:38 PM

special-K,

I had to laugh when I saw your Highlander's rack system. Here is a pic of mine with the same C-clamp mounting system. My grandfather made these racks 20 years ago and my Dad and I have been using them on various trucks over the years. Unfortunately the pic was taken after the load was off for my Dad.

Chuck

**oldiron** · 10-16-2007, 12:12 AM

Sorry for an old picture got to get some new ones.

ShowSS12 · 11-05-2008, 12:34 AM

Quote:

Originally Posted by rogergodding

I know I've hauled a bunch of other stuff, but I can't find any pics other than this........

Haul-in ass is always good

eric67m · 10-15-2007, 11:06 PM

Eric67m where did you get those wheels that are on that silver truck i have hunted for years for a set of them and the ones i find in scrap yard are too beat up and the ones i find laying in yards going to waste they don't wanna sell.[/QUOTE]

My wheels are us indy mags. They came with my truck for $650 and are about the only solid piece of metal on the truck

. Actually only the sheet metal items are rusted out. At first I was indifferent with them but they are growing on me. Brad was trying to convince me to polish them out but I kind of like them satin and like the low maintance part of them.

shopking72 · 10-15-2007, 02:52 PM

Here is my truck with some fence materials in the back

**special-K** · 10-15-2007, 03:57 PM

Not mine and not working at the moment.But,wouldn`t this be nice to have for your little "chore boy"?

72freak · 10-15-2007, 05:20 PM

couple of one of mine

caminokid · 10-15-2007, 05:27 PM

Its full of pipes and a water heater...and the old back bumper and the old Camaros seats...well seat. Someone stole one of them last night. I feel bad for them!

70gmcjimmy · 10-15-2007, 07:20 PM

I dig seeing the trucks at work, guys! Cool thread! Here is my C2500 in 1980, 1983, and 2006 just workin like it's sposed too.

Most of our cargo seems kinda lame after seeing the "stuff" RogerGodding has in his truck! 'Bout the best looking---pickup---er---box----I mean---truck I ever seen!

Later---DAC

truckguy_69 · 10-15-2007, 08:08 PM

heres my truck with some branches in the back.

DirtyLarry · 10-15-2007, 10:06 PM

Here is my ’72 beater truck. We built a new house a few years ago and this old girl has come in real handy with hauling the landscaping materials. I actually bought it for $300 at an estate sale back in 2002.

**N2TRUX** · 10-15-2007, 10:19 PM

n2billets truck "Lucy" at work...

danny6892002 · 10-16-2007, 12:35 AM

i got a book a bout the gas company that i work for and two pics of our trucks were on it. the company is called Oneok.

glock35ipsc · 10-16-2007, 12:45 AM

Quote:

Originally Posted by danny6892002

i got a book a bout the gas company that i work for and two pics of our trucks were on it. the company is called Oneok.

Looks to be a string of them in that first pic! Those are cool pics, I love seeing the old timey shots.

BTW, great company you work for! One of my best performing stocks is OKS, Oneok Partners L.P.!

Orange · 10-17-2007, 11:50 AM

Quote:

Originally Posted by glock35ipsc

Looks to be a string of them in that first pic! Those are cool pics, I love seeing the old timey shots.

BTW, great company you work for! One of my best performing stocks is OKS, Oneok Partners L.P.!

And there is one sitting behind the white one in the second pic too!

DLB

Ole Blue 68 · 10-17-2007, 04:21 PM

Hey Burner, is that an original PA truck? It's looks to be in pretty good shape if it is.....

Beast388 · 10-17-2007, 08:28 PM

Hauling the '77 K20 that donated her axles for the 'Burb.

Psycho71 · 10-16-2007, 11:27 PM

Here's mine with a load headed to the farm a few weeks back. It was more than I shoulda tried to haul, but she didn't let me down.

Texasdeere · 11-04-2007, 10:31 PM

Here are some of mine. The load kinda matches the truck, "Rusty"

Texasdeere · 11-03-2008, 01:11 PM

Bump

big_al_71 · 11-03-2008, 01:33 PM

Well here is mine with a full load of parts on its way to the body shop....

*MonteSS454* · 11-03-2008, 01:37 PM

My truck hates pulling a trailer, but I had 4 desks that weighed a few hundred a piece plus some other heavy junk on there.

**Palf70Step** · 11-03-2008, 01:49 PM

It's been on before, but mine working before disassembly. Hauling away the yard trimmings.

10-15-2007, 05:36 PM	#1
rogergodding Registered User Join Date: Aug 2007 Location: Sachse, Texas Posts: 614	Re: A truck being a truck, let's see em. managed to find another...... ran a load from dfw to san antonio ........

10-15-2007, 11:38 PM	#3
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: A truck being a truck, let's see em. special-K, I had to laugh when I saw your Highlander's rack system. Here is a pic of mine with the same C-clamp mounting system. My grandfather made these racks 20 years ago and my Dad and I have been using them on various trucks over the years. Unfortunately the pic was taken after the load was off for my Dad. Chuck Attached Images __________________ In Search Of

10-16-2007, 12:12 AM	#4
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,092	Re: A truck being a truck, let's see em. Sorry for an old picture got to get some new ones. Attached Images __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

10-15-2007, 11:06 PM	#6
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Re: A truck being a truck, let's see em. Eric67m where did you get those wheels that are on that silver truck i have hunted for years for a set of them and the ones i find in scrap yard are too beat up and the ones i find laying in yards going to waste they don't wanna sell.[/QUOTE] My wheels are us indy mags. They came with my truck for $650 and are about the only solid piece of metal on the truck. Actually only the sheet metal items are rusted out. At first I was indifferent with them but they are growing on me. Brad was trying to convince me to polish them out but I kind of like them satin and like the low maintance part of them. __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"

10-15-2007, 02:52 PM	#7
shopking72 Registered User Join Date: Sep 2005 Location: Kansas Posts: 774	Re: A truck being a truck, let's see em. Here is my truck with some fence materials in the back __________________ 1972 C10 LWB- 4.5 Front and 5 Rear Drop, 406/TH350 1966 Caprice 1968 Impala (Frame Off LSX Project) 2001 Tahoe LT 2013 Hyundai Elantra 2010 Kawasaki Z1000

10-15-2007, 03:57 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: A truck being a truck, let's see em. Not mine and not working at the moment.But,wouldn`t this be nice to have for your little "chore boy"? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-15-2007 at 03:59 PM.

10-15-2007, 05:20 PM	#9
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: A truck being a truck, let's see em. couple of one of mine Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

10-15-2007, 05:27 PM	#10
caminokid Chevy nut Join Date: Jun 2007 Location: Springfield, Illinois Posts: 2,266	Re: A truck being a truck, let's see em. Its full of pipes and a water heater...and the old back bumper and the old Camaros seats...well seat. Someone stole one of them last night. I feel bad for them! __________________ 84 Chevy Custom Deluxe 1/2 Ton Named Fade To Black II "Remember kids there is NO replacement for displacement!" Last edited by caminokid; 10-15-2007 at 05:28 PM.

10-15-2007, 07:20 PM	#11
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: A truck being a truck, let's see em. I dig seeing the trucks at work, guys! Cool thread! Here is my C2500 in 1980, 1983, and 2006 just workin like it's sposed too. Most of our cargo seems kinda lame after seeing the "stuff" RogerGodding has in his truck! 'Bout the best looking---pickup---er---box----I mean---truck I ever seen! Later---DAC Attached Images __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

10-15-2007, 08:08 PM	#12
truckguy_69 Registered User Join Date: Apr 2007 Location: washington Posts: 95	Re: A truck being a truck, let's see em. heres my truck with some branches in the back.

10-15-2007, 10:06 PM	#13
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: A truck being a truck, let's see em. Here is my ’72 beater truck. We built a new house a few years ago and this old girl has come in real handy with hauling the landscaping materials. I actually bought it for $300 at an estate sale back in 2002. Attached Images __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

10-15-2007, 10:19 PM	#14
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: A truck being a truck, let's see em. n2billets truck "Lucy" at work... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-16-2007, 12:35 AM	#15
danny6892002 Registered User Join Date: Jan 2006 Location: Texas Posts: 53	Re: A truck being a truck, let's see em. i got a book a bout the gas company that i work for and two pics of our trucks were on it. the company is called Oneok. Attached Images

10-17-2007, 04:21 PM	#18
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: A truck being a truck, let's see em. Hey Burner, is that an original PA truck? It's looks to be in pretty good shape if it is.....

10-17-2007, 08:28 PM	#19
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	Re: A truck being a truck, let's see em. Hauling the '77 K20 that donated her axles for the 'Burb. Attached Images __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.



Register or Log In To remove these advertisements.

10-16-2007, 11:27 PM	#20
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: A truck being a truck, let's see em. Here's mine with a load headed to the farm a few weeks back. It was more than I shoulda tried to haul, but she didn't let me down. __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

11-04-2007, 10:31 PM	#21
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: A truck being a truck, let's see em. Here are some of mine. The load kinda matches the truck, "Rusty" Attached Images

11-03-2008, 01:11 PM	#22
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: A truck being a truck, let's see em. Bump

11-03-2008, 01:33 PM	#23
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: A truck being a truck, let's see em. Well here is mine with a full load of parts on its way to the body shop.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-03-2008, 01:37 PM	#24
MonteSS454 Account Suspended Join Date: Jun 2007 Location: Claremore, Oklahoma Posts: 821	Re: A truck being a truck, let's see em. My truck hates pulling a trailer, but I had 4 desks that weighed a few hundred a piece plus some other heavy junk on there.

11-03-2008, 01:49 PM	#25
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,790	Re: A truck being a truck, let's see em. It's been on before, but mine working before disassembly. Hauling away the yard trimmings. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.