layin frame? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 01-02-2008, 02:16 PM

Quote:

Originally Posted by SCOTI

No "hate'n" from what I've read.

I never said there was....just didn't want it too progress bro.....

HAPPY NEW YEAR TO ALL !!!!!

Later.....

PrerunnerRob · 01-02-2008, 03:06 PM

No hatin' at all , just a difference of preferance. Happy new year to all!

**ChiefRocka** · 01-03-2008, 05:46 AM

Quote:

Originally Posted by ChiefRocka

I never said there was....just didn't want it too progress bro.....

HAPPY NEW YEAR TO ALL !!!!!

Later.....

Happy 2008 !!!

Dinos63 · 01-03-2008, 07:07 AM

tony thanks for the tip on the sub,talk to the dude,and i will see it on new years days, thanks good luck on the trailing arms project , (sorry not trying to jack the thread) dino

64shortc10 · 01-03-2008, 12:50 PM

Dino,

No prob on the burb. If I lived there I probably would have jumped on it. It sounds like it needs little to be a runner? And paint and interior sound to be in good shape? You liked the visor huh? Later

Tony from Norcal

c10addict · 01-03-2008, 04:39 PM

Up front I am running drop spindles with front airbag cup cut down to 1 inch. Out back a kp notch with a 2 inch block... I relocated my rear bags to the rear axle... With this set up the trailing arms touch the frame when dumped and the frame sits level.... with a 29" tire the bottom of the middle of the frame is 3 inches off the ground... It will drag the sh*t out of the rear license plate box but thats about it...

Dinos63 · 01-03-2008, 05:15 PM

Quote:

Originally Posted by 64shortc10

Dino,

No prob on the burb. If I lived there I probably would have jumped on it. It sounds like it needs little to be a runner? And paint and interior sound to be in good shape? You liked the visor huh? Later

Tony from Norcal

oh sh-t, went to see it and .......bought it , it's a very good tub , it turn out to be a dude i knew, small world, the truck is all apart should get it on saturday.now were to put it.... thanks again for the tip. happy newyear

64shortc10 · 01-03-2008, 05:41 PM

Dino,

You lucky DOG! Ok so give me details, How far apart is it? The body, and interior look good? What comes with it? How much did you get it for? And the big ? What are your plans for it?

Tony from Norcal

64shortc10 · 01-03-2008, 05:48 PM

C10addict,

Thanks for the pics and making it clear how far of the ground with that setup. Looks like I'm spending the money on Kp six link! I dont think I would have been happy without the Kp setup anyways. Thanks again for the help! Keep up the good progress on your ride its looking Good! Later

Tony from Norcal

Dinos63 · 01-03-2008, 06:23 PM

Quote:

Originally Posted by 64shortc10

Dino,

You lucky DOG! Ok so give me details, How far apart is it? The body, and interior look good? What comes with it? How much did you get it for? And the big ? What are your plans for it?

Tony from Norcal

Tony , the body( tub) great shape, all the glass good,no interior to speak of,that ok, great roof, frame off, fenders off , and alot of parts, i have a new frame at nates that almost done hmmm... c4 dropmember,(that for that big window cab i am going sell )but i think i will dropmember it and slick up the frame. and put back together,i have more than enough parts , motors,tran, art, parts, let me know on the cab

PBFAB.COM · 01-03-2008, 07:15 PM

Quote:

Originally Posted by Dinos63

oh sh-t, went to see it and .......bought it , it's a very good tub , it turn out to be a dude i knew, small world, the truck is all apart should get it on saturday.now were to put it.... thanks again for the tip. happy newyear

No room at my shop!

Maybe it's time to put up a building in Lavine?

Dinos63 · 01-04-2008, 04:32 PM

Quote:

Originally Posted by porterbuilt

No room at my shop!

Maybe it's time to put up a building in Lavine?

I like the idea of the saturday plan, Hey thanks again on the work on the 78 good to see ya today, ( sorry on the thread jack tony)

Rokcrln · 04-21-2008, 05:20 PM

Just to bring this back from the dead. Tony just moved a few blocks away from me so I went and checked out his truck this week. It is a great start and should be a good truck for him and his family. The DropMember looks like a work of art down inside their. My first time seing one in person now I need to buy a few.

Kevin
LFD Inc.

1963chevyshort · 05-07-2008, 11:43 AM

Well Tony hey when are you going to show us some pics?

01-02-2008, 03:06 PM	#27
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: layin frame? No hatin' at all , just a difference of preferance. Happy new year to all!

01-03-2008, 07:07 AM	#29
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: layin frame? tony thanks for the tip on the sub,talk to the dude,and i will see it on new years days, thanks good luck on the trailing arms project , (sorry not trying to jack the thread) dino __________________ CHEVY ONLY... Nothin Else !

01-03-2008, 12:50 PM	#30
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: layin frame? Dino, No prob on the burb. If I lived there I probably would have jumped on it. It sounds like it needs little to be a runner? And paint and interior sound to be in good shape? You liked the visor huh? Later Tony from Norcal

01-03-2008, 04:39 PM	#31
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: layin frame? Up front I am running drop spindles with front airbag cup cut down to 1 inch. Out back a kp notch with a 2 inch block... I relocated my rear bags to the rear axle... With this set up the trailing arms touch the frame when dumped and the frame sits level.... with a 29" tire the bottom of the middle of the frame is 3 inches off the ground... It will drag the sht out of the rear license plate box but thats about it... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile* Last edited by c10addict; 01-03-2008 at 04:40 PM.

01-03-2008, 05:41 PM	#33
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: layin frame? Dino, You lucky DOG! Ok so give me details, How far apart is it? The body, and interior look good? What comes with it? How much did you get it for? And the big ? What are your plans for it? Tony from Norcal

01-03-2008, 05:48 PM	#34
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: layin frame? C10addict, Thanks for the pics and making it clear how far of the ground with that setup. Looks like I'm spending the money on Kp six link! I dont think I would have been happy without the Kp setup anyways. Thanks again for the help! Keep up the good progress on your ride its looking Good! Later Tony from Norcal

04-21-2008, 05:20 PM	#38
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: layin frame? Just to bring this back from the dead. Tony just moved a few blocks away from me so I went and checked out his truck this week. It is a great start and should be a good truck for him and his family. The DropMember looks like a work of art down inside their. My first time seing one in person now I need to buy a few. Kevin LFD Inc.

05-07-2008, 11:43 AM	#39
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: layin frame? Well Tony hey when are you going to show us some pics? __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.