If you had $10,000... What would you do to your truck? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rcrahn · 01-17-2008, 04:42 AM

hook it up to a new bass boat

69long"n"low · 01-17-2008, 05:19 AM

paint/body work tools and interior just finish it up a lil then what ever was left use for the gas tank

Bishops Trucks · 01-17-2008, 05:27 AM

Paint my truck and my Camaro.

Dingfodgy · 01-17-2008, 05:58 AM

After paying the obligatory 35% "Wife Tax"- I'd take the balance and go get a '62 Impala I've had my eye on for awhile. That way I still have something cool to drive whilst the '67 LWB goes into the shop for some Shortbed Surgery. If there just happened to be a couple duckets left- I'd score some new BFG's and a 3/5 drop for the old girl.

**SactoJim** · 01-17-2008, 06:04 AM

Gas money.

**truckdude239** · 01-17-2008, 06:46 AM

send it to the body shop and have them doo allt he body work

Psycho71 · 01-17-2008, 07:16 AM

Hmm,
Let's see.

Build a hyd roller 383 (450hp +/-),a gear vendor OD behind my 350 turbo, install eaton posi w/3:73's

If anything was left after that, I'd put it into rear dics, and suspension.

Or I'd go all out with the awesome paint job, and spend the rest on suspension, and motor upgrades.

Jay

weasel29gm · 01-17-2008, 07:25 AM

1) Aftermarket air... 2) Buy another project... 3) Mig welder... 4) Any leftover gas and $$$ for the shows in 08!!!!

70rs/ss · 01-17-2008, 07:30 AM

Well, this isn't too tough, then on the other hand it is impossible. I have a 2wd Blazer, 5.3/4l60e, 6.0/4l80e, Vortec 350 (ready to assemble), Vortec 454's X's 2 (both to be 496-502's full roller {already, thanks, GM!}) a 4-bolt 454 GM block from my 90 454 SS truck, another 454 from a 74 truck, nasty 4-bolt 350 on engine stand, LT1/4l60e (aluminum heads and all!), Holley Aluminum heads for nasty 500hp 383 to come. I have two complete sets of disc brake parts (each set is for front and rear discs!) Two 3:73 posi rears, both to get the before mentioned disc brakes, I have a NV4500, and 4x4 Blazer with 454/4-speed (Yeah that's a total of 5 454's if you were counting, and I may have more, that I can't remember!?) I have three complete sets of Vortec 454 heads, 100cc's, oval ports that flow as good or better than most high dollar aftermarket heads!! I have 6 or 8 350's some of which will be 383's (Vortec or Lt1 because it'll have a roller cam already!) I have more stuff, not bragging, as a matter of fact seeing it all typed out here, I've decided I may be sick!! Now for the 10 G's I'd like to finish one of these things and use some of this stuff I have been collecting over the years!!! I also have a 70 RS/SS Camaro, a 67 Chevelle (4-door, but still!!) 90 454 SS, 72 K5 Blazer, 72 2wd Blazer. Please don't call the loony bin on my they'll lock me up and destroy the key. Holy crap, anybody have 10 "real" G's they'd like to spend, I need to have a garage sale!!!

ChevLoRay · 01-17-2008, 07:38 AM

Not to hijack your post/thread, but I asked this same question back in '01, after my previous long-term employer eliminated my department and my job. I got one of those "packages" that had me thinking about what I could/would do with the money.

My wife and I have five kids.

Need I say more?

Oh, when my Dad died almost a year ago, he left me enough money to start on my truck. It won't be enough, but "Thanks, Dad!"

If someone was to lay 10 large on me for my truck and nothing else.....engine and tranmission and "stuff"....would be on my list.

Ackattack · 01-17-2008, 08:05 AM

Well right now I'm working on my restoration, and don't really have a budget....just the more I spend the longer it will take sorta thing. So some things that I'd do that aren't currently in the plans: Aftermarket front suspension of some sort, big Bear Brakes, and then go ahead an plop that super charger on top of the 5.3 (actually I'd probably switch to a 6.0L to run the new L76 heads! and then put a super charger on it)

TP from Cntl PA · 01-17-2008, 08:12 AM

Finish my C-20 with the Cummins............I'd let someone else do the body work, but still paint it ourselves, buy an aluminum stake body, and a ZF-6spd new.

1969K10 · 01-17-2008, 08:19 AM

body panels!, cheap-o paint job, under/overdrive, rebuild my 14-bolt & matching D44 (or replace w/ D60). And if anything was left over, 383!!

jackyl9999 · 01-17-2008, 08:34 AM

Pay someone to focus on my truck and put it back together.

streetstar · 01-17-2008, 08:34 AM

10k would come close to finishing my '69 GMC the way i want it.

POR-15 the frame and suspension, allocate $5000 for paint, buddy buckets covered in black vinyl, wood bed, and a mildly warmed up 454 with alloy heads disguised to look like a 402 from back in the day. Not sure if i could swing Vintage air with just 10k, -- so i would save 2k more and do that

toomanytoyz · 01-17-2008, 08:39 AM

Quote:

Originally Posted by 70rs/ss

Well, this isn't too tough, then on the other hand it is impossible. I have a 2wd Blazer, 5.3/4l60e, 6.0/4l80e, Vortec 350 (ready to assemble), Vortec 454's X's 2 (both to be 496-502's full roller {already, thanks, GM!}) a 4-bolt 454 GM block from my 90 454 SS truck, another 454 from a 74 truck, nasty 4-bolt 350 on engine stand, LT1/4l60e (aluminum heads and all!), Holley Aluminum heads for nasty 500hp 383 to come. I have two complete sets of disc brake parts (each set is for front and rear discs!) Two 3:73 posi rears, both to get the before mentioned disc brakes, I have a NV4500, and 4x4 Blazer with 454/4-speed (Yeah that's a total of 5 454's if you were counting, and I may have more, that I can't remember!?) I have three complete sets of Vortec 454 heads, 100cc's, oval ports that flow as good or better than most high dollar aftermarket heads!! I have 6 or 8 350's some of which will be 383's (Vortec or Lt1 because it'll have a roller cam already!) I have more stuff, not bragging, as a matter of fact seeing it all typed out here, I've decided I may be sick!! Now for the 10 G's I'd like to finish one of these things and use some of this stuff I have been collecting over the years!!! I also have a 70 RS/SS Camaro, a 67 Chevelle (4-door, but still!!) 90 454 SS, 72 K5 Blazer, 72 2wd Blazer. Please don't call the loony bin on my they'll lock me up and destroy the key. Holy crap, anybody have 10 "real" G's they'd like to spend, I need to have a garage sale!!!

I would Finish Paying Mike (70rs/ss) for the 67 Stepper so he Could buy another 454

Rick

NONHOG · 01-17-2008, 08:42 AM

Disc in front , hidden hitch in rear , car trailer to load a beat up musclecar

(that I have yet to find)

El Bombero · 01-17-2008, 08:46 AM

Id chop down my LWB to a SWB then do get some professional body and paint work

70rs/ss · 01-17-2008, 09:00 AM

Quote:

Originally Posted by toomanytoyz

I would Finish Paying Mike (70rs/ss) for the 67 Stepper so he Could buy another 454

Rick

Somebody has to keep OPEC busy, right!! Hoping to get some e85 stations around here then I'll do an E85 502 with stupid compression, since we all know e85 is 100 octane, right!! Plus I am seriously thinking of the biodiesel set up as well for my hotrod diesel truck. I love the smell of burnt french fry oil!

**Hart_Rod** · 01-17-2008, 09:04 AM

hhhhhhhhmmmmmmmmmmmm
|
|
|
\/

rodstored-72 · 01-17-2008, 09:26 AM

I Would Get My Paint & Body Work Finished. Then I Would Finish My Interior. I Guess Then Some Wheels & Tires. After All That I Would Sell It & By A Barrett-jackson Camaro Or A Really Good Kit Cobra....

72BlckButy · 01-17-2008, 09:45 AM

Don't tell anyone.... especially you guys!

You would help me spend it to quick!

Put it the bank, but hopefully be able to at least start on my truck...

71big block · 01-17-2008, 10:49 AM

Blower for my 572, new wood bed floor, 4 link, wheels and tires

JAKES 68GMC · 01-17-2008, 11:17 AM

Probably build my 350 into a 383 with the best of everything, put a NV4500 in, power steering, open knuckle front end to turn sharper, some 33's on 16.5 aluminum slots, small 2-3"lift, get the bodywork and paint done, fix the wheelhop

make it reliable and drive it. Then save what money is left over.

clemson71guy · 01-17-2008, 11:24 AM

put some airbags on it, 18 inch foose wheels, chrome everything out under the hood, and put some subs in it.

01-17-2008, 04:42 AM	#26
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: If you had $10,000... What would you do to your truck? hook it up to a new bass boat

01-17-2008, 05:19 AM	#27
69long"n"low Registered User Join Date: Jan 2008 Location: SURREY BC, CANADA Posts: 278	Re: If you had $10,000... What would you do to your truck? paint/body work tools and interior just finish it up a lil then what ever was left use for the gas tank

01-17-2008, 05:27 AM	#28
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: If you had $10,000... What would you do to your truck? Paint my truck and my Camaro. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

01-17-2008, 05:58 AM	#29
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: If you had $10,000... What would you do to your truck? After paying the obligatory 35% "Wife Tax"- I'd take the balance and go get a '62 Impala I've had my eye on for awhile. That way I still have something cool to drive whilst the '67 LWB goes into the shop for some Shortbed Surgery. If there just happened to be a couple duckets left- I'd score some new BFG's and a 3/5 drop for the old girl. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

01-17-2008, 06:04 AM	#30
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: If you had $10,000... What would you do to your truck? Gas money. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-17-2008, 06:46 AM	#31
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: If you had $10,000... What would you do to your truck? send it to the body shop and have them doo allt he body work __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-17-2008, 07:16 AM	#32
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: If you had $10,000... What would you do to your truck? Hmm, Let's see. Build a hyd roller 383 (450hp +/-),a gear vendor OD behind my 350 turbo, install eaton posi w/3:73's If anything was left after that, I'd put it into rear dics, and suspension. Or I'd go all out with the awesome paint job, and spend the rest on suspension, and motor upgrades. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!

01-17-2008, 07:25 AM	#33
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,097	Re: If you had $10,000... What would you do to your truck? 1) Aftermarket air... 2) Buy another project... 3) Mig welder... 4) Any leftover gas and $$$ for the shows in 08!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

01-17-2008, 07:30 AM	#34
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: If you had $10,000... What would you do to your truck? Well, this isn't too tough, then on the other hand it is impossible. I have a 2wd Blazer, 5.3/4l60e, 6.0/4l80e, Vortec 350 (ready to assemble), Vortec 454's X's 2 (both to be 496-502's full roller {already, thanks, GM!}) a 4-bolt 454 GM block from my 90 454 SS truck, another 454 from a 74 truck, nasty 4-bolt 350 on engine stand, LT1/4l60e (aluminum heads and all!), Holley Aluminum heads for nasty 500hp 383 to come. I have two complete sets of disc brake parts (each set is for front and rear discs!) Two 3:73 posi rears, both to get the before mentioned disc brakes, I have a NV4500, and 4x4 Blazer with 454/4-speed (Yeah that's a total of 5 454's if you were counting, and I may have more, that I can't remember!?) I have three complete sets of Vortec 454 heads, 100cc's, oval ports that flow as good or better than most high dollar aftermarket heads!! I have 6 or 8 350's some of which will be 383's (Vortec or Lt1 because it'll have a roller cam already!) I have more stuff, not bragging, as a matter of fact seeing it all typed out here, I've decided I may be sick!! Now for the 10 G's I'd like to finish one of these things and use some of this stuff I have been collecting over the years!!! I also have a 70 RS/SS Camaro, a 67 Chevelle (4-door, but still!!) 90 454 SS, 72 K5 Blazer, 72 2wd Blazer. Please don't call the loony bin on my they'll lock me up and destroy the key. Holy crap, anybody have 10 "real" G's they'd like to spend, I need to have a garage sale!!! Last edited by 70rs/ss; 01-17-2008 at 07:35 AM.

01-17-2008, 07:38 AM	#35
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: If you had $10,000... What would you do to your truck? Not to hijack your post/thread, but I asked this same question back in '01, after my previous long-term employer eliminated my department and my job. I got one of those "packages" that had me thinking about what I could/would do with the money. My wife and I have five kids. Need I say more? Oh, when my Dad died almost a year ago, he left me enough money to start on my truck. It won't be enough, but "Thanks, Dad!" If someone was to lay 10 large on me for my truck and nothing else.....engine and tranmission and "stuff"....would be on my list. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

01-17-2008, 08:05 AM	#36
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,524	Re: If you had $10,000... What would you do to your truck? Well right now I'm working on my restoration, and don't really have a budget....just the more I spend the longer it will take sorta thing. So some things that I'd do that aren't currently in the plans: Aftermarket front suspension of some sort, big Bear Brakes, and then go ahead an plop that super charger on top of the 5.3 (actually I'd probably switch to a 6.0L to run the new L76 heads! and then put a super charger on it) __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

01-17-2008, 08:12 AM	#37
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Re: If you had $10,000... What would you do to your truck? Finish my C-20 with the Cummins............I'd let someone else do the body work, but still paint it ourselves, buy an aluminum stake body, and a ZF-6spd new. __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

01-17-2008, 08:19 AM	#38
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Re: If you had $10,000... What would you do to your truck? body panels!, cheap-o paint job, under/overdrive, rebuild my 14-bolt & matching D44 (or replace w/ D60). And if anything was left over, 383!! __________________ 1969 K10 - V8, 465, 205, 12 bolt, D44 2002-current 1969 K20 - V8, 465, 221, Eaton, D44 2012-current Nothin' but drums on all 4 corners! past horses in the stable 72 C10-short step (97-02), 68 C10-long fleet (06-12)

01-17-2008, 08:34 AM	#39
jackyl9999 Registered User Join Date: Feb 2003 Location: Paragould, Ar Posts: 571	Re: If you had $10,000... What would you do to your truck? Pay someone to focus on my truck and put it back together. __________________ 1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily

01-17-2008, 08:34 AM	#40
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: If you had $10,000... What would you do to your truck? 10k would come close to finishing my '69 GMC the way i want it. POR-15 the frame and suspension, allocate $5000 for paint, buddy buckets covered in black vinyl, wood bed, and a mildly warmed up 454 with alloy heads disguised to look like a 402 from back in the day. Not sure if i could swing Vintage air with just 10k, -- so i would save 2k more and do that __________________ Are you retired too? Nonsense! I'm in my prime



Register or Log In To remove these advertisements.

01-17-2008, 08:42 AM	#42
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,458	Re: If you had $10,000... What would you do to your truck? Disc in front , hidden hitch in rear , car trailer to load a beat up musclecar (that I have yet to find) __________________ "I feel the need for speed!"... as soon as I am done with my nap.

01-17-2008, 08:46 AM	#43
El Bombero Registered User Join Date: Nov 2007 Location: Fremont, Ca Posts: 40	Re: If you had $10,000... What would you do to your truck? Id chop down my LWB to a SWB then do get some professional body and paint work __________________ They sure don't make 'em like that anymore

01-17-2008, 09:04 AM	#45
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: If you had $10,000... What would you do to your truck? hhhhhhhhmmmmmmmmmmmm \| \| \| \/ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-17-2008 at 09:07 AM.

01-17-2008, 09:26 AM	#46
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,009	Re: If you had $10,000... What would you do to your truck? I Would Get My Paint & Body Work Finished. Then I Would Finish My Interior. I Guess Then Some Wheels & Tires. After All That I Would Sell It & By A Barrett-jackson Camaro Or A Really Good Kit Cobra....

01-17-2008, 09:45 AM	#47
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: If you had $10,000... What would you do to your truck? Don't tell anyone.... especially you guys! You would help me spend it to quick! Put it the bank, but hopefully be able to at least start on my truck... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 01-17-2008 at 09:45 AM.

01-17-2008, 10:49 AM	#48
71big block 1971 GMC 3/4 ton, 572 CID Join Date: Aug 2007 Location: Green Bay, WI Posts: 293	Re: If you had $10,000... What would you do to your truck? Blower for my 572, new wood bed floor, 4 link, wheels and tires __________________ 71 GMC 3/4 572 CID, 1988 GMC 1/2 2006 Saturn Vue "We always have parts left over on a job this size"

01-17-2008, 11:17 AM	#49
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: If you had $10,000... What would you do to your truck? Probably build my 350 into a 383 with the best of everything, put a NV4500 in, power steering, open knuckle front end to turn sharper, some 33's on 16.5 aluminum slots, small 2-3"lift, get the bodywork and paint done, fix the wheelhop make it reliable and drive it. Then save what money is left over. Last edited by JAKES 68GMC; 01-17-2008 at 11:21 AM.

01-17-2008, 11:24 AM	#50
clemson71guy Registered User Join Date: Oct 2007 Location: north carolina Posts: 470	Re: If you had $10,000... What would you do to your truck? put some airbags on it, 18 inch foose wheels, chrome everything out under the hood, and put some subs in it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.