1972 cab panels and parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TotalChevy1 · 03-04-2008, 10:18 PM

How much for the door panels, if still for sale, do you have pics of both

Thanks

bestchevyfan · 03-05-2008, 02:44 AM

Hey, I Talked To You About Cutting A Part Of The Outside Firewall
In Your Last Post. The Part I Need Is The Rail That Runs Across Under The Windshield It Holds The Wires/wire Harness. It Runs Across The Top Of The Heater Box...you Quoted A Price Of I Think $20.00 Plus Shipping. See Picture Thanks Buddy.

otsenre · 03-05-2008, 04:03 AM

Quote:

Originally Posted by 67CHIP72

Are you cutting this cab? If so, is this panel still available?

Here is pic of panel 20.00 plus shippingAttachment 341767

Attachment 341768

Attachment 341769

otsenre · 03-05-2008, 04:09 AM

Quote:

Originally Posted by olblue60@aol.com

I re read the thread and you quoted me a shipped price. If you think that you need a little more for shipping, let me know. Thanks. whats the story with the doors? Can they ship greyhound? Thanks!

John

If I had quoted a price shipped, thats what it is! Sorry

70GMCer · 03-05-2008, 04:12 AM

Quote:

Originally Posted by 70GMCer

Are you selling the exhaust pipes, less mufflers? Is that exhaust for a lwb or swb? Anyway of cutting the pipes in a few manageable pieces and ship them? If so, how much shipped to 21085?

steve

Any word on the shipping for the exhaust?

otsenre · 03-05-2008, 04:14 AM

Quote:

Originally Posted by msgross

I might have missed a price on my parts shipped to 17042... thanks..

it was the outer rear floor pieces..

Mike, I think there is enough good panel there for what you need, I did not get a chance to cut out this past weekend, but I will here soon. The 2 pieces you need, how about 20 bucks shipped

otsenre · 03-05-2008, 04:15 AM

Quote:

Originally Posted by 70GMCer

Are you selling the exhaust pipes, less mufflers? Is that exhaust for a lwb or swb? Anyway of cutting the pipes in a few manageable pieces and ship them? If so, how much shipped to 21085?

steve

I am using the exhaust on my project, its for a shortbed

otsenre · 03-05-2008, 04:18 AM

Quote:

Originally Posted by bestchevyfan

Hey, I Talked To You About Cutting A Part Of The Outside Firewall
In Your Last Post. The Part I Need Is The Rail That Runs Across Under The Windshield It Holds The Wires/wire Harness. It Runs Across The Top Of The Heater Box...you Quoted A Price Of I Think $20.00 Plus Shipping. See Picture Thanks Buddy.

You bet, when do you want it. I will be cutting metal here shortly

otsenre · 03-05-2008, 04:23 AM

Quote:

Originally Posted by TotalChevy1

How much for the door panels, if still for sale, do you have pics of both

Thanks

Door panels look good, arm rests need help, 35.00 plus shippingAttachment 341770

Attachment 341771

otsenre · 03-05-2008, 04:25 AM

Old schooler, I dont want to deal with shipping doors, Thanks

geoman · 03-05-2008, 06:36 AM

Ernest,

I will be picking up a money order for you tomorrow after work for the under the tank panel.

Thanks again!
Mike

otsenre · 03-05-2008, 07:36 AM

Quote:

Originally Posted by geoman

Ernest,

I will be picking up a money order for you tomorrow after work for the under the tank panel.

Thanks again!
Mike

Mike, let me get everything cut, then I will post pics to make sure it will work for you. I dont want to be holding your money and then I screw up on the cutting, I will start cutting tommorrow when I get off work.

bomar · 03-05-2008, 09:01 AM

is that passenger side door latch up for sale

geoman · 03-05-2008, 06:33 PM

Sounds good Ernest. I will wait till I hear from you then.

Thanks
Mike

TotalChevy1 · 03-05-2008, 08:09 PM

Quote:

Originally Posted by otsenre

Door panels look good, arm rests need help, 35.00 plus shippingAttachment 341770

Attachment 341771

PM sent, I'll take the door panels

Thanks

bestchevyfan · 03-05-2008, 08:43 PM

Hey, Just Let Me Know How Much And How To Pay You. Thanks, Buddy

*FormerMember* · 03-05-2008, 10:42 PM

How much for both doors, with mirrors if you still have them? Any rot on either door?

otsenre · 03-06-2008, 04:15 AM

Quote:

Originally Posted by grendel

How much for both doors, with mirrors if you still have them? Any rot on either door?

Doors are good, mirrors might be sold pending payment, I dont want to ship doors at this time, Sorry

olblue60@aol.com · 03-06-2008, 08:24 AM

I'm still in on the mirrors. I'm needing your address and type of payment that you prefer.

John

bestchevyfan · 03-09-2008, 10:54 PM

Hey, Let Me Know How To Pay You When You Cut The Part.if It Is Easy To Cut Under The A\c Heater Holes And Then Toward The P,s, I Will Take All Of That Also. Thanks,buddy

otsenre · 03-10-2008, 03:16 AM

Quote:

Originally Posted by otsenre

Sorry guys, I meant to delete another thread and this one got in the way, anyhow if we can pick up where we left off... I think visors are sold, pending paymentAttachment 340761

Attachment 340762

Attachment 340763

Attachment 340764

Here are pics of panels, let me know if you guys want them, Attachment 342932

Attachment 342933

Attachment 342934

Attachment 342935

Attachment 342936

otsenre · 03-10-2008, 03:18 AM

Quote:

Originally Posted by otsenre

Here are pics of panels, let me know if you guys want them, Attachment 342932

Attachment 342933

Attachment 342934

Attachment 342935

Attachment 342936

moreAttachment 342937

Attachment 342938

geoman · 03-10-2008, 03:50 AM

PM sent back to you Ernest

bestchevyfan · 03-11-2008, 03:55 PM

hey they parts I would like cut are shown in picture.

please send me how much it will cost with shipping.
mailing address is
e.g. wilburn
1401 jordan lane
huntsville al 35816
this is a business address it that matters ...thanks buddy

msgross · 03-11-2008, 05:15 PM

go ahead and ship that entire back floor piece to the other guy that needs it. My pieces can be fabbed easier that messing up that piece for him. Thanks for the pics...

03-04-2008, 10:18 PM	#26
TotalChevy1 Registered User Join Date: Mar 2007 Location: Phoenix, Arizona Posts: 175	Re: 1972 cab panels and parts How much for the door panels, if still for sale, do you have pics of both Thanks __________________ 1972 c-20, 350/350, dana 60 w/456 gears(no Posi)

03-05-2008, 02:44 AM	#27
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 1972 cab panels and parts Hey, I Talked To You About Cutting A Part Of The Outside Firewall In Your Last Post. The Part I Need Is The Rail That Runs Across Under The Windshield It Holds The Wires/wire Harness. It Runs Across The Top Of The Heater Box...you Quoted A Price Of I Think $20.00 Plus Shipping. See Picture Thanks Buddy. Last edited by bestchevyfan; 11-29-2009 at 01:58 PM.

03-05-2008, 04:25 AM	#35
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 1972 cab panels and parts Old schooler, I dont want to deal with shipping doors, Thanks

03-05-2008, 06:36 AM	#36
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 1972 cab panels and parts Ernest, I will be picking up a money order for you tomorrow after work for the under the tank panel. Thanks again! Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

03-05-2008, 09:01 AM	#38
bomar Registered User Join Date: Dec 2007 Location: Cottage Grove, Oregon Posts: 52	Re: 1972 cab panels and parts is that passenger side door latch up for sale

03-05-2008, 06:33 PM	#39
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 1972 cab panels and parts Sounds good Ernest. I will wait till I hear from you then. Thanks Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

03-05-2008, 08:43 PM	#41
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 1972 cab panels and parts Hey, Just Let Me Know How Much And How To Pay You. Thanks, Buddy

03-05-2008, 10:42 PM	#42
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 1972 cab panels and parts How much for both doors, with mirrors if you still have them? Any rot on either door?

03-06-2008, 08:24 AM	#44
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 1972 cab panels and parts I'm still in on the mirrors. I'm needing your address and type of payment that you prefer. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-09-2008, 10:54 PM	#45
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 1972 cab panels and parts Hey, Let Me Know How To Pay You When You Cut The Part.if It Is Easy To Cut Under The A\c Heater Holes And Then Toward The P,s, I Will Take All Of That Also. Thanks,buddy

03-10-2008, 03:50 AM	#48
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: 1972 cab panels and parts PM sent back to you Ernest __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

03-11-2008, 03:55 PM	#49
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: 1972 cab panels and parts hey they parts I would like cut are shown in picture. please send me how much it will cost with shipping. mailing address is e.g. wilburn 1401 jordan lane huntsville al 35816 this is a business address it that matters ...thanks buddy Last edited by bestchevyfan; 11-29-2009 at 01:58 PM.

03-11-2008, 05:15 PM	#50
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1972 cab panels and parts go ahead and ship that entire back floor piece to the other guy that needs it. My pieces can be fabbed easier that messing up that piece for him. Thanks for the pics... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 03-11-2008 at 05:15 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.