Watts link info

[Slmd92DIME]

I just finished up mine and I held a square up to it from the floor and I have 0 side to side movement. It works great and looks kinda cool too....

[Big Irish]

How hard was it too install ? and set up ?

[hotrodhomi]

installing on my blazer was not as straight forward as I expected because of the rear crossmember in front of my gas tank. I had to modify it for clearance. But, I don't think that trucks would have this problem. It was real easy to set up. I would do it again if I had too.

[Big Irish]

Originally Posted by hotrodhomi

installing on my blazer was not as straight forward as I expected because of the rear crossmember in front of my gas tank. I had to modify it for clearance. But, I don't think that trucks would have this problem. It was real easy to set up. I would do it again if I had too.

thanks , was it the KP set up ?

[hotrodhomi]

Originally Posted by Big Irish

thanks , was it the KP set up ?

Yes it was KP. I used the 67-72 2wd chevy truck kit, but I used it on my blazer. I had to use the weld on plates that were included in the kit because my frame in not boxed. The kit is only bolt on if you have a step notch or you box your frame. But, it was still fairly easy to install once I relocated my rear crossmember (this step is not need for a truck- I think).

[stunna]

how much is that kit anyway?

[Big Irish]

I was told by Clint it was $399.95 .

[hotrodhomi]

http://www.kplinks.com/product.php?p...6&cat=5&page=1
I didn't see the 67-72 kit on the website, but it looks just like this one. Same price. Its is not painted or coated.