Building a Blazer - vtblazer's Way - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 08-01-2008, 06:32 AM

Quote:

Originally Posted by jaros44sr

Getting closer to Sat., good luck and take your camera, so we all can see

I can't wait until Saturday, I'm heading over after lunch.

Turns out I'll be needing a trans cover, got one of those for me?

vtblazer · 08-01-2008, 06:34 AM

Quote:

Originally Posted by 71RestoRod

Mmmmm.... Resto-rod.... Nice....

dude, I get it...

**jaros44sr** · 08-01-2008, 06:36 AM

Quote:

Originally Posted by vtblazer

I can't wait until Saturday, I'm heading over after lunch.

Turns out I'll be needing a trans cover, got one of those for me?

Not in my current inventory, but I'll keep an eye out

vtblazer · 08-03-2008, 05:35 AM

Not a lot got done on Friday being I got a later start than originally planned for.
Lots of BS'n about trucks and a good steak, ribs & beer dinner though.

One days work:
*Had a bare frame, had the axles, had the blazer tub on a 67 panel truck frame.
*Mounted axles under frame, rolled out of garage.
*Pulled tub off of panel frame and rolled that frame out of the way.
*Had to lift the blazer tub enough to clear 42"s, so the frame would roll under it.
*Installed the front clip.
*Left for home around 6:30p.m.

The spring's I already had and decide to use for the purpose of making it a roller, so if it looks like it sits a little 'off', it does.
Their 2.5" lift springs with a shackle flip in the rear but hey it's what we had, so it's what we used.

Lost almost 2hrs waiting around for the rain to lighten up too...

It's a damn nice tub, could almost build it and drive it as is.

Pics aren't that great, it was pouring most of the afternoon.

msgross · 08-03-2008, 07:32 AM

I like that setup....

I know you have a few projects but here's a blazer near my house for sale... Guy was looking for around $900, I would love to build a trail rig but i'm knee deep in mine and no place to house another toy.

http://lancaster.craigslist.org/pts/761823029.html

Big J · 08-03-2008, 08:14 AM

Your gonna wanna keep this after your done, lol...... Looking great! I wasn't sure about the Hummer wheels but they look pretty good.

Chevyman63 · 08-03-2008, 08:39 AM

Wow...that thing IS in great shape.

Nice score!

vtblazer · 08-03-2008, 08:40 AM

Quote:

Originally Posted by Big J

Your gonna wanna keep this after your done, lol...... Looking great! I wasn't sure about the Hummer wheels but they look pretty good.

This one is a keeper, building it for ME, MYSELF and I.

Acquiring this one now also allows for the flip blazer to happen too.

**Yukon Jack** · 08-03-2008, 08:57 AM

Looking good already - I'm really digging the Hummer rims - hmmm, those would look killer on my K5!

vtblazer · 08-03-2008, 10:07 AM

Quote:

Originally Posted by Yukon Jack

Looking good already - I'm really digging the Hummer rims - hmmm, those would look killer on my K5!

I know what you mean, I was hoping they'd look good but wasn't positive I'd like em...I really do though.

I love the orange too. (always wanted one this color)

The blazer will end up looking very close to the way it sits right now, orange with a white top and I'm leaving the alloy wheels without any center caps, cause I'm diggin' the rugged look it gives, seeing the hubs.

With the H2's, the front tires are inside of the fenders, which in my state will getcha a ticket if their not. (bonus)

Still searching for one more H2 wheel for the spare if anybody comes across one...

msgross · 08-03-2008, 10:13 AM

I can look for a rim at Carlisle... what should it cost for a nice straight one?

PM me your number and I can call you if I find something.

vtblazer · 08-03-2008, 10:20 AM

Quote:

Originally Posted by msgross

I can look for a rim at Carlisle... what should it cost for a nice straight one?

PM me your number and I can call you if I find something.

Decent H2 wheels can be had all day long for $100.00 on e-bay, $75.00 even if you catch it right.

Wanna look for some blazer doors for me while your there too?

hgs_notes · 08-03-2008, 11:07 AM

It's not running yet? You slacker!

**jaros44sr** · 08-03-2008, 11:25 AM

That thing looks great already, couple guys in NJ parting out blazers...JC, 6t727t2, ScottH.. That one Mike is talking about has a good goodwrench motor in it, I forget if you have a motor or not

haus · 08-03-2008, 11:46 AM

that thing looks friggin SWEET!

msgross · 08-03-2008, 12:08 PM

Quote:

Originally Posted by vtblazer

Decent H2 wheels can be had all day long for $100.00 on e-bay, $75.00 even if you catch it right.

Wanna look for some blazer doors for me while your there too?

I can look, Some guys think it's a "$Barrett-Jackson$" Carlisle show though...

Big J · 08-03-2008, 03:54 PM

Quote:

Originally Posted by vtblazer

This one is a keeper, building it for ME, MYSELF and I.

Acquiring this one now also allows for the flip blazer to happen too.

OOOOOk I thought this was the one you were flippin'. Now I see why your going the extra mile.... Cage and all... I bet it will ride real nice with those tires and springs. You should get a set of those nice metal finished Bilstein shocks for it..... They look cool. Not sure how they ride though.

Jtrux · 08-03-2008, 04:27 PM

Is this gonna be all out restoration or is thebody mounted for good on the frame the way it is??

vtblazer · 08-03-2008, 08:19 PM

Quote:

Originally Posted by Jtrux

Is this gonna be all out restoration or is thebody mounted for good on the frame the way it is??

Body will come back off, the P/O stripped it bare metal and it has since flashed over.

Not a restoration , not even close.
It will be over built, not stock, just a classic 1st gen body...from there it's all fair game.

Jtrux · 08-03-2008, 08:34 PM

Quote:

Originally Posted by vtblazer

Body will come back off, the P/O stripped it bare metal and it has since flashed over.

Not a restoration , not even close.
It will be over built, not stock, just a classic 1st gen body...from there it's all fair game.

Great, I can't wait to see some more progress. Powdercoat the frame or just regular old rattle can??

low'n slow · 08-03-2008, 10:05 PM

"Turns out I'll be needing a trans cover, got one of those for me?"

I've got a spare, high hump right? One with the transfer case hole and one without. Pm if interested.

Looks to be a great start.

vtblazer · 08-04-2008, 06:57 AM

Quote:

Originally Posted by Jtrux

Great, I can't wait to see some more progress. Powdercoat the frame or just regular old rattle can??

Some sort of frame paint, Eastwood's, Rust Bullet, POR...etc.
Will be applied via spray gun after blasting.

Quote:

Originally Posted by low'n slow

"Turns out I'll be needing a trans cover, got one of those for me?"

I've got a spare, high hump right? One with the transfer case hole and one without. Pm if interested.

Looks to be a great start.

Turned out that the P/O found it when he dug out all the boxes, appreciate the offer though, thank you.

So this a.m. while the comp is warming up, I look over my desktop background (O'Yeah, it's there) and I start adding up whats sitting there right now dollar wise...dayum it adds up fast.

**special-K** · 08-04-2008, 07:27 AM

Talk to mgross about a frame coating.There`s a great product out of NJ.What trans will you use?Do you have that,yet?My shortbed will be along the same lines.Maybe they can cruise together sometime.Prolly won`t have mine done until after about four more of your projects are done.

.

vtblazer · 08-04-2008, 07:34 AM

Quote:

Originally Posted by special-K

Talk to mgross about a frame coating.There`s a great product out of NJ.What trans will you use?Do you have that,yet?My shortbed will be along the same lines.Maybe they can cruise together sometime.Prolly won`t have mine done until after about four more of your projects are done.

.

700r and a 241 T-case. (forgot those in my original post didn't I?)

The only parts left to aquire are the seats and cage tubing.

Then it's finding the time to assemble it all.

69TowRig · 08-04-2008, 08:26 AM

That was one day's work? Dayum, that goes quick when it's all rust-free!

08-03-2008, 05:35 AM	#29
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Building a Blazer - vtblazer's Way Not a lot got done on Friday being I got a later start than originally planned for. Lots of BS'n about trucks and a good steak, ribs & beer dinner though. One days work: Had a bare frame, had the axles, had the blazer tub on a 67 panel truck frame. Mounted axles under frame, rolled out of garage. Pulled tub off of panel frame and rolled that frame out of the way. Had to lift the blazer tub enough to clear 42"s, so the frame would roll under it. Installed the front clip. Left for home around 6:30p.m. The spring's I already had and decide to use for the purpose of making it a roller, so if it looks like it sits a little 'off', it does. Their 2.5" lift springs with a shackle flip in the rear but hey it's what we had, so it's what we used. Lost almost 2hrs waiting around for the rain to lighten up too... It's a damn nice tub, could almost build it and drive it as is. Pics aren't that great, it was pouring most of the afternoon. Attached Images Last edited by vtblazer; 08-03-2008 at 05:40 AM.

08-03-2008, 07:32 AM	#30
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way I like that setup.... I know you have a few projects but here's a blazer near my house for sale... Guy was looking for around $900, I would love to build a trail rig but i'm knee deep in mine and no place to house another toy. http://lancaster.craigslist.org/pts/761823029.html __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-03-2008 at 07:34 AM.

08-03-2008, 08:14 AM	#31
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: Building a Blazer - vtblazer's Way Your gonna wanna keep this after your done, lol...... Looking great! I wasn't sure about the Hummer wheels but they look pretty good. __________________ BAZINGA! My Build

08-03-2008, 08:39 AM	#32
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Building a Blazer - vtblazer's Way Wow...that thing IS in great shape. Nice score! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

08-03-2008, 08:57 AM	#34
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Building a Blazer - vtblazer's Way Looking good already - I'm really digging the Hummer rims - hmmm, those would look killer on my K5! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-03-2008, 10:13 AM	#36
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way I can look for a rim at Carlisle... what should it cost for a nice straight one? PM me your number and I can call you if I find something. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-03-2008 at 10:13 AM.

08-03-2008, 11:07 AM	#38
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Building a Blazer - vtblazer's Way It's not running yet? You slacker! __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

08-03-2008, 11:25 AM	#39
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: Building a Blazer - vtblazer's Way That thing looks great already, couple guys in NJ parting out blazers...JC, 6t727t2, ScottH.. That one Mike is talking about has a good goodwrench motor in it, I forget if you have a motor or not __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 08-03-2008 at 11:49 AM.

08-03-2008, 11:46 AM	#40
haus MMMM Ramen! Join Date: Mar 2007 Location: Beavercreek, OH Posts: 118	Re: Building a Blazer - vtblazer's Way that thing looks friggin SWEET! __________________ Tim - 1970 chevy blazer

08-03-2008, 04:27 PM	#43
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Building a Blazer - vtblazer's Way Is this gonna be all out restoration or is thebody mounted for good on the frame the way it is?? __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

08-03-2008, 10:05 PM	#46
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 883	Re: Building a Blazer - vtblazer's Way "Turns out I'll be needing a trans cover, got one of those for me?" I've got a spare, high hump right? One with the transfer case hole and one without. Pm if interested. Looks to be a great start.

08-04-2008, 07:27 AM	#48
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Building a Blazer - vtblazer's Way Talk to mgross about a frame coating.There`s a great product out of NJ.What trans will you use?Do you have that,yet?My shortbed will be along the same lines.Maybe they can cruise together sometime.Prolly won`t have mine done until after about four more of your projects are done.. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-04-2008, 08:26 AM	#50
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Building a Blazer - vtblazer's Way That was one day's work? Dayum, that goes quick when it's all rust-free! __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.