Need pics 60-66 (slammed not bagged)

[ChrisDollins]

^^Looks good!^^ How much drop and what did you use?

Chris

[Leadfoot Lambert]

Front 3 inch drop springs and 3 inch DJM drop lower control arms, Rear Jeep TJ springs, no blocks no C notch. Wheels are Ridler 18x8 0 offset tires 255-55-18 Goodyear LS2.
Front is about as low as you can go without inner fender mods, I can't put my fist between the top of the tire and the inner fender. Rear is very soft with the Jeep springs, too soft really, there's about 2 1/2 inches before the snubbers hit.

[samuellg1977]

Originally Posted by terd ferguson

Two coils ut up front and Jeep TJ springs plus 3" blocks in the rear. The front is pretty much on the trimmed bumpstops and the rear is about an inch off. The rear rides good, the front not so good. 1 1/2 coils is probably about perfect.






***EDITED TO ADD***
The tires are 235/75/16

Can you post up a pic of those blocks for me? Curious as to how they are supposed to sit and how to asjust the pinion angle. Thanks.

sam

[StepAside]

64 step

Be ready to "Stepaside" once I have this bad boy going the way I want to....Found it in Arkansas. The look it has is the way I bought it...Looking to chrome it out and paint it hot rod black...Any other ideas are welcome...
Thanks
Stepaside
"We are what we repeatedly do, excellence is then not an act it's a habit."

[derail]

Here's mine. ECE 4/6 with 2.5" drop spindles and 2" blocks in back.

[samuellg1977]

Originally Posted by StepAside

64 step

Be ready to "Stepaside" once I have this bad boy going the way I want to....Found it in Arkansas. The look it has is the way I bought it...Looking to chrome it out and paint it hot rod black...Any other ideas are welcome...
Thanks
Stepaside
"We are what we repeatedly do, excellence is then not an act it's a habit."

That thing is AWE-TASTIC!! Mine came from AR too. I have a 63 short stepper. I think we may have a pair of twins here soon, Brother!! I am painting mine that same suede black and ridin till the wheels fold up!!

Sam

[StepAside]

I hear ya bro...add me as a friend and we can send pics as we make progress...Im new to this so maybe you can give me some ideas and pointers...God Bless you too for serving our country...Lead the way
StepAside

[StepAside]

Originally Posted by derail

Here's mine. ECE 4/6 with 2.5" drop spindles and 2" blocks in back.

Thats a bad little dude...send me some pics of the inside..I love the wheels on that thing...very nice...you inspire me!

[StepAside]

I just figured out how to reply to your message..duhh...ha

[samuellg1977]

Stepaside, What's under the hood of your rig?

[StepAside]

350 bored out...the guy told me it used to run mid 11's. Seems pretty fast still, just needs some tlc...and what are u rollin with...

[nachodog2]

here's a few of mine.10 inch notch 5 leaves removed axle flipped and 2 inch blocks with air shocks. this height is all the way up and ride height.

[samuellg1977]

A bone-stock 350 and 700R4... I also have a 5.7L TPI from a Firebird and I am planning to swap them out in a few weeks. I just need to sell off the carbed 350 motor and trans to pay for the swap.

[juanz1947]

Originally Posted by nachodog2

here's a few of mine.10 inch notch 5 leaves removed axle flipped and 2 inch blocks with air shocks. this height is all the way up and ride height.

dam look good

[KroAutomotiveInc]

body dropped 4 inch everything eles is stock

[fryer1979]

Doesn't show the drop too well, but it is the most recent picture I have of her. Taken last weekend after a big local show. One of my club members wanted to visit her father's grave site, so the whole club cruised with her (just in case someone gets to wondering about the cemetary pics). Drop is 5" springs in the rear, and 3" spring up front with one coil cut and bumstops/steer stops removed from control arms. She rides awesome with the help of some Bell Tech nitro drop shocks, but the rear slaps the factory bumpstops when I hit any decent bump. Next step is 2.5" spindles up front, and 2" blocks and a c-notch kit in the rear (probably with shock relocaters, and adjustable track bar too). Then she'll be good for a while.

[Str8axle]

Originally Posted by nachodog2

here's a few of mine.10 inch notch 5 leaves removed axle flipped and 2 inch blocks with air shocks. This height is all the way up and ride height.

love those astro supremes!!!!!!!!!!!!!

[1Bad62Pro/Street]

Originally Posted by derail

Here's mine. ECE 4/6 with 2.5" drop spindles and 2" blocks in back.

I always loved those 5 spoke style of wheels!
American Racing Torq-Thrust II?

[StepAside]

Man I want 5 spoke torque thrust but I have 6 lugs....Grrrr...Does anyone know if they make 5 spokes for 6 lugs? They don't even have to be AR's

[StepAside]

http://youtu.be/_-8B6VdMomA

Here is my newly acquired 64 step...and this is just the beginning..

[derail]

Originally Posted by 1Bad62Pro/Street

I always loved those 5 spoke style of wheels!
American Racing Torq-Thrust II?

1Bad, They're AR Torq-Thrust II's. Got them on e-bay. Was the first thing I did to the truck. Although my taste has changed a little since I bought them, I think they're a classic look that you really cant go wrong with.

[T Smith]

derail, love your truck, let's see some more pics!

[lil_sahara450r]

Originally Posted by T Smith

derail, love your truck, let's see some more pics!

i second that! and could you let us know what rim and tire sizes those are?

[derail]

Originally Posted by T Smith

derail, love your truck, let's see some more pics!

Originally Posted by lil_sahara450r

i second that! and could you let us know what rim and tire sizes those are?

Thanks guys. I appreciate it. The tires are 225/55r16 front and 255/50r16 rear. 8" wheels in front and 10" in back. I'll try to put some more pics up in the next couple of days.

[kieth]

My 66 gmc is a hybrid, had rear coils I stuck some 8" bags where the springs were so I did not have to fight the stance battle, up front 255/60/r17 tires, 17 x 9 Cragar wheels, 2.5" drop spindles, with 6 cylinder stock front coils, I am going to change the front tires next to drop it a little more......in the front and I can then adjust the rear to see how it looks. Kieth

in the rear 265/70/r 17 9" cragars, the front of my truck has a burb front crossmember, that plus the 2.5" drop spindles sure made the wheels close to the fender well up front......the tire size change up front will make it have a little more clearance. when turning.....Kieth


2.5" drop spindles:
http://kieth.smugmug.com/Trucks/66-G..._9qGFfrc-X2-LB

Next step will be air ride up front and a c notch in the rear, will change the rear bags to 7" instead of 8" to improve the ride and use the 8" bags on the front to handle the weight.


before with stock spindles:

http://kieth.smugmug.com/Trucks/66-G...7_Z2WbRxH-A-LB