parting a 68 chevy now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 08-18-2009, 10:14 AM

Grill hoops shipped to 77018 if they are in good condition?
Shawn

olblue60@aol.com · 08-18-2009, 10:17 AM

I'll take the dash cluster. Do you have a 67 choke knob (delux) threaded? Thanks!

John
Please send your paypal account.

teeitup · 08-18-2009, 12:23 PM

Wanco, I'll get a quote tonight, it will be the weekend before I get it off the truck
CPNE, Jeff, $25 for the pair plus shipping, I'll get them off and get you some better pics
Big Orange, Donnie, $20 plus shipping for manual box, sorry no 6 cly stuff right now but I have one coming in probably in the next week
Special_K, Tim, I'll check them out
shootiniron, $50 plus shipping has a slight bow and some dents
jlive68, sorry no shipping hood
Special_K, Tim I was wondering who would say something about that

72blckbuty, Nate, I'll check them out
hart-Rod, Rob, $12 shipped
brian mac, I'm not sure if I'm taking this truck down that far, if I do it will be a couple weeks
jorgensenc, Shawn, they are damaged
oldblue, John, I'll send you my pay pal after work, sorry no deluxe choke knobs just a plain one right now
Thanks Randy

**CPNE** · 08-18-2009, 12:37 PM

Ok. Sounds good. Thanks

**BIG ORANGE** · 08-18-2009, 03:27 PM

Steering box/ let me know the shipping cost to 29720 then I can tell the ole guy wanting it!
Thanks Randy

72SWBChevy · 08-18-2009, 03:51 PM

How much for all the shifter linkage(frame pc/rod/pc that attaches to rod) shipped to 77018? And if you dont sell the column, would you just sell the indicator piece on the top? Not the PRNDL1 piece.
Will that linkage work on a TH350 tranny?

Tks Craig

teeitup · 08-18-2009, 04:59 PM

Cpne, Jeff, here are some pics
Big Orange, Donnie, at most $40 shipped
72SWBchevy, Craig, its for a powerglide, not a th350
Thanks Randy

teeitup · 08-18-2009, 05:02 PM

pics for Jeff

teeitup · 08-18-2009, 05:03 PM

6777777

teeitup · 08-18-2009, 05:06 PM

7222222

teeitup · 08-18-2009, 05:07 PM

7777777777777
gate has dent by the "R"

teeitup · 08-18-2009, 05:09 PM

8222222
gate has dent below the "H"
and a slight bow along bottom

teeitup · 08-18-2009, 05:10 PM

8777777777777

teeitup · 08-18-2009, 05:10 PM

9000000000000

teeitup · 08-18-2009, 05:22 PM

Ok here are alot of the pics and I'll try to answer everyones questions
CPNE, Jeff, its has a dent in lower part of drivers side and a couple of the lower holes have small stress dents from tightened screws, one small dent on pass side, just surface rust on back
Special_K, Tim, sorry non matching
Shootiniron, here are some more pics of gate
Hotfun, Mark, one small dent in top of ridge, and one ping dent from underneath, see pics
72blckbuty, Nate, they are bad sorry
Hart_Rod, Rob, here are pics of the knobs, not a stock radio or knobs
Oleblue, John, it has a weird fitting on back of speedo, I'm doing some checking to see how it comes off on message board
Wanco, Michael, I'm going to try to get a quote for you tonight hopefully
Thanks Randy

**wancosc356** · 08-18-2009, 05:24 PM

Ok. No problem and no rush. Also, if you wanna throw in the mounting brackets and bolts that mount it to the rad support and fenders, that would be cool. Also, when you get it off, could u shoot me some pics of the back of it? Thanks

**71blksuper4x4** · 08-18-2009, 05:41 PM

Randy, I think Nate was looking for a Rear View Mirror like that. Not to disturb you while you are trying to figure out the speedo lock, but you mind snappin a shot of the silver on the dash bezel for me. Trevor

HOTFUN · 08-18-2009, 07:10 PM

Randy What do you want for the hood and heater control and possibly the RH bedside depending how it is for rust and dents? Thanks, Mark

**BIG ORANGE** · 08-18-2009, 08:20 PM

Thanks Randy, sounds like a min. of $60.00 at most. I'll tell Gonzo and see about geting his money up front. Dont want to get stuck again from trying to help a local guy out!
Donnie

6768chevylover · 08-18-2009, 08:53 PM

how much for the bed sides lh and rh? i dont need the floor or the wheel tubs.

teeitup · 08-18-2009, 09:06 PM

Wanco, Michael, I'll get some pics when I get it off
71blksuper, Trevor, I forgot, I'll get a pic Wed
Hotfun, Mark, the hood is $30, the heater control has a broken arm and the 2 lower pop rivets have popped out, $10 for it. I'll have to check out the bedside
Big Orange, Donnie, $40 from my end and whatever you get from him on top of that
6768chevylover, sorry no shipping bedsides
Thanks Randy

72BlckButy · 08-18-2009, 09:26 PM

Quote:

Originally Posted by 71blksuper4x4

Randy, I think Nate was looking for a Rear View Mirror like that.

What would I do with the guy's on this board...

Randy I would definitely be interested in some pics of the mirror. Price and Price plus shipping to 65043.

Are you going to make it to the All Truck Nats (Sept 11-13

Out of curiousity, what's the price on the tailgate?

HOTFUN · 08-18-2009, 09:41 PM

Randy, I'll take the hood and pass on the heater control. Should just buy the complete box but looks like the drivers side may have some issues and you have the tailgate and hardware off now. Let me know what that passenger side bedside looks like and a price and I'll settle up with you. I'll get you paid right away but I hope you can store it for a little bit till I can make it over? Thanks, Mark

ERASER5 · 08-18-2009, 09:46 PM

How much for the 67-68 specific top bar that the hood closes on?

**special-K** · 08-18-2009, 09:48 PM

Thanks Randy.Let me know if you come up with a nice matched set.

08-18-2009, 10:14 AM	#26
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: parting a 68 chevy now Grill hoops shipped to 77018 if they are in good condition? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

08-18-2009, 10:17 AM	#27
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: parting a 68 chevy now I'll take the dash cluster. Do you have a 67 choke knob (delux) threaded? Thanks! John Please send your paypal account. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-18-2009, 12:23 PM	#28
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Wanco, I'll get a quote tonight, it will be the weekend before I get it off the truck CPNE, Jeff, $25 for the pair plus shipping, I'll get them off and get you some better pics Big Orange, Donnie, $20 plus shipping for manual box, sorry no 6 cly stuff right now but I have one coming in probably in the next week Special_K, Tim, I'll check them out shootiniron, $50 plus shipping has a slight bow and some dents jlive68, sorry no shipping hood Special_K, Tim I was wondering who would say something about that 72blckbuty, Nate, I'll check them out hart-Rod, Rob, $12 shipped brian mac, I'm not sure if I'm taking this truck down that far, if I do it will be a couple weeks jorgensenc, Shawn, they are damaged oldblue, John, I'll send you my pay pal after work, sorry no deluxe choke knobs just a plain one right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 12:37 PM	#29
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: parting a 68 chevy now Ok. Sounds good. Thanks __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

08-18-2009, 03:27 PM	#30
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Re: parting a 68 chevy now Steering box/ let me know the shipping cost to 29720 then I can tell the ole guy wanting it! Thanks Randy __________________ Things happen for a reason!

08-18-2009, 03:51 PM	#31
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: parting a 68 chevy now How much for all the shifter linkage(frame pc/rod/pc that attaches to rod) shipped to 77018? And if you dont sell the column, would you just sell the indicator piece on the top? Not the PRNDL1 piece. Will that linkage work on a TH350 tranny? Tks Craig __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595 Last edited by 72SWBChevy; 08-18-2009 at 03:59 PM. Reason: add more question

08-18-2009, 04:59 PM	#32
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Cpne, Jeff, here are some pics Big Orange, Donnie, at most $40 shipped 72SWBchevy, Craig, its for a powerglide, not a th350 Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:02 PM	#33
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now pics for Jeff Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:03 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 6777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:06 PM	#35
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 7222222 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:07 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 7777777777777 gate has dent by the "R" Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-18-2009 at 05:23 PM.

08-18-2009, 05:09 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 8222222 gate has dent below the "H" and a slight bow along bottom Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-18-2009 at 05:24 PM.

08-18-2009, 05:10 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 8777777777777 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:10 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now 9000000000000 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 05:22 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Ok here are alot of the pics and I'll try to answer everyones questions CPNE, Jeff, its has a dent in lower part of drivers side and a couple of the lower holes have small stress dents from tightened screws, one small dent on pass side, just surface rust on back Special_K, Tim, sorry non matching Shootiniron, here are some more pics of gate Hotfun, Mark, one small dent in top of ridge, and one ping dent from underneath, see pics 72blckbuty, Nate, they are bad sorry Hart_Rod, Rob, here are pics of the knobs, not a stock radio or knobs Oleblue, John, it has a weird fitting on back of speedo, I'm doing some checking to see how it comes off on message board Wanco, Michael, I'm going to try to get a quote for you tonight hopefully Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

08-18-2009, 05:24 PM	#41
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: parting a 68 chevy now Ok. No problem and no rush. Also, if you wanna throw in the mounting brackets and bolts that mount it to the rad support and fenders, that would be cool. Also, when you get it off, could u shoot me some pics of the back of it? Thanks __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

08-18-2009, 05:41 PM	#42
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting a 68 chevy now Randy, I think Nate was looking for a Rear View Mirror like that. Not to disturb you while you are trying to figure out the speedo lock, but you mind snappin a shot of the silver on the dash bezel for me. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-18-2009, 07:10 PM	#43
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Randy What do you want for the hood and heater control and possibly the RH bedside depending how it is for rust and dents? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-18-2009, 08:20 PM	#44
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Re: parting a 68 chevy now Thanks Randy, sounds like a min. of $60.00 at most. I'll tell Gonzo and see about geting his money up front. Dont want to get stuck again from trying to help a local guy out! Donnie __________________ Things happen for a reason!

08-18-2009, 08:53 PM	#45
6768chevylover Registered User Join Date: May 2007 Location: nepa Posts: 745	Re: parting a 68 chevy now how much for the bed sides lh and rh? i dont need the floor or the wheel tubs.

08-18-2009, 09:06 PM	#46
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 68 chevy now Wanco, Michael, I'll get some pics when I get it off 71blksuper, Trevor, I forgot, I'll get a pic Wed Hotfun, Mark, the hood is $30, the heater control has a broken arm and the 2 lower pop rivets have popped out, $10 for it. I'll have to check out the bedside Big Orange, Donnie, $40 from my end and whatever you get from him on top of that 6768chevylover, sorry no shipping bedsides Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-18-2009, 09:41 PM	#48
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: parting a 68 chevy now Randy, I'll take the hood and pass on the heater control. Should just buy the complete box but looks like the drivers side may have some issues and you have the tailgate and hardware off now. Let me know what that passenger side bedside looks like and a price and I'll settle up with you. I'll get you paid right away but I hope you can store it for a little bit till I can make it over? Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-18-2009, 09:46 PM	#49
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: parting a 68 chevy now How much for the 67-68 specific top bar that the hood closes on? __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

08-18-2009, 09:48 PM	#50
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: parting a 68 chevy now Thanks Randy.Let me know if you come up with a nice matched set. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.