not sure what to think about this one... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iehotrod · 09-25-2009, 11:18 PM

that looks like a high school project gone bad..... what a waste of burb.

joe231 · 09-26-2009, 11:39 AM

Less than an hour left.... And no bids...

kdrodworks316 · 09-26-2009, 12:17 PM

In the true spirit of no steel is sacred, I have to admit that I like it. It needs a giant 6 banger cummins diesel engine to finish it out, maybe even like a 3406 cat motor. I think its a cool idea that just missed the mark

jgh64pkup · 09-26-2009, 01:51 PM

Quote:

Originally Posted by joe231

I think it is kinda cool...I would drive it

I hope it was a rust bucket before the transformation

i would drive it too

iehotrod · 09-26-2009, 05:30 PM

kdrodworks316 I believe you may be right about the industrial motor in that thing that once was a fine vechile to begin with. it should be in a mad max type of movie. it's stilll ugly.

72BlckButy · 09-26-2009, 06:12 PM

Yikes...

protrash64 · 09-27-2009, 12:47 AM

Now that I have been staring at this thread for the fourth time....like looking at a car accident, I realize that thing kinda looks like a dirt track racer??

PrerunnerRob · 09-27-2009, 10:51 AM

I just don't get it. I see the point of making something different(if it makes it better), or building a totally one off custom, becasue thats whats needed sometimes to push boundries, but that is um...different. My issues are based on function, driveability, and quality of work: how bad do the rear tires scrub the body? How much road time has this "fresh build" had? 5 lug Dana 60 rear end(regular is 8 lug)? Anybody notice the lower rear lip of the body has been left rusty and is in need of repair?

I don't mean to sound like a negative nancy, but I have seen too many builds as of lately that are built for "the look" instead of proper engineering, and completeness of build.

I'll get off my soapbox now, I'm sure someone could bag on my build for some of the same reasons, but proper engineering and safety will not ever be an issue left to chance.

Anyway, back to having fun, getting some work done, and not getting called in to work!

hewlett2002000 · 09-27-2009, 10:19 PM

hey yall. i like it. it looks bad ass.

09-25-2009, 11:18 PM	#26
iehotrod Registered User Join Date: Dec 2008 Location: Oak Hills, California Posts: 393	Re: not sure what to think about this one... that looks like a high school project gone bad..... what a waste of burb.

09-26-2009, 11:39 AM	#27
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: not sure what to think about this one... Less than an hour left.... And no bids... __________________ *CHEVY ONLY*

09-26-2009, 12:17 PM	#28
kdrodworks316 KOFFIN DRAGGER Join Date: Jan 2008 Location: st.anthony Idaho Posts: 864	Re: not sure what to think about this one... In the true spirit of no steel is sacred, I have to admit that I like it. It needs a giant 6 banger cummins diesel engine to finish it out, maybe even like a 3406 cat motor. I think its a cool idea that just missed the mark __________________ If the life I live dont kill me, then I guess I'll never die! New updated stuff at www.kdrodworks.com My site still needs help, web guys and gals pm me. the best guys in the whole world: sweet70beast, jonzcustomshop, runninlow, captainfab, and the one I havent met yet, joe231

09-26-2009, 05:30 PM	#30
iehotrod Registered User Join Date: Dec 2008 Location: Oak Hills, California Posts: 393	Re: not sure what to think about this one... kdrodworks316 I believe you may be right about the industrial motor in that thing that once was a fine vechile to begin with. it should be in a mad max type of movie. it's stilll ugly.

09-26-2009, 06:12 PM	#31
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: not sure what to think about this one... Yikes... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-27-2009, 12:47 AM	#32
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: not sure what to think about this one... Now that I have been staring at this thread for the fourth time....like looking at a car accident, I realize that thing kinda looks like a dirt track racer?? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

09-27-2009, 10:51 AM	#33
PrerunnerRob Registered User Join Date: Jan 2007 Location: San Jose Posts: 847	Re: not sure what to think about this one... I just don't get it. I see the point of making something different(if it makes it better), or building a totally one off custom, becasue thats whats needed sometimes to push boundries, but that is um...different. My issues are based on function, driveability, and quality of work: how bad do the rear tires scrub the body? How much road time has this "fresh build" had? 5 lug Dana 60 rear end(regular is 8 lug)? Anybody notice the lower rear lip of the body has been left rusty and is in need of repair? I don't mean to sound like a negative nancy, but I have seen too many builds as of lately that are built for "the look" instead of proper engineering, and completeness of build. I'll get off my soapbox now, I'm sure someone could bag on my build for some of the same reasons, but proper engineering and safety will not ever be an issue left to chance. Anyway, back to having fun, getting some work done, and not getting called in to work!

09-27-2009, 10:19 PM	#34
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: not sure what to think about this one... hey yall. i like it. it looks bad ass. __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.