CTrow's Truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 11-25-2009, 09:04 AM

Nice pair of trucks. The ole' former stepside is really coming to life.

*1sik52* · 11-25-2009, 09:50 AM

Looking good. Personally I wouldnt change the TPI. I would maybe change the block out from a 305 to a 350, but I would leave the TPI especially being since all the electrical is already done. Those are good setups

ctrow · 12-16-2009, 11:42 PM

At this point basically waiting on the painter to get done. Taking a lot longer than it should but what can you do, right?

I've been mocking up the engine, exhaust (nothing fancy), and have the fuel system mostly setup.

I had to clearance the motor mount to use these headers. I also wanted the tuck the exhaust up as much as possible.

Next steps, gathering parts for the engine, getting it repainted (silver), then getting it running. Hopefully by the time paint is done it will be just a matter of setting the body on and start putting on parts.

mcbassin · 12-16-2009, 11:59 PM

This is an awesome build with a great family history. I actually like the tweed door panels.....so if you want to get rid of them I am close and can take them off your hands. Your truck is looking great with the new wheels/tires.
I think your flat bed is a short wheel base one ton. Who is doing your paint? the fenders look great. keep the updates coming.

VA72C10 · 12-17-2009, 12:02 AM

Looking good! What headers are those?

ctrow · 12-17-2009, 12:02 AM

Jason Voth at Resurrection Paint. He's in Noble just at the turn off to Thunder Valley.

Thanks for the compliments

ctrow · 12-17-2009, 12:08 AM

Quote:

Originally Posted by VA72C10

Looking good! What headers are those?

They are Patriot Clippster style. 3" primary's. Ordered them from JEGs.

I tried the Speedway Motors ram horn manifolds but there just wasn't enough room.

cstm68 · 12-17-2009, 10:49 PM

hey what air managment kit are you using for your bags??

ctrow · 12-18-2009, 10:07 AM

Quote:

Originally Posted by cstm68

hey what air managment kit are you using for your bags??

It's an older Air Ride Technology system I got off eBay. The valves are their standard 1/4" valve system. It has the digital display but it doesn't have any presets like on the newer versions.

I think mine might the the ProRide?

HITAMUDHOLE · 12-18-2009, 10:27 AM

Really nice looking, can't wait to see it all in Black. I too love the flatbed truck, very cool tow rig. Those wheels are cool as a fan too, I want to do some wheels like that on mine once I get the rest of the truck done.

**wancosc356** · 12-19-2009, 12:27 AM

Great looking truck. Subscribed! Can't wait to see more.

chevy71c10 · 12-19-2009, 02:26 AM

Very nice build, hope my rolling chassis turns out even 1/2 as nice as yours. Great job. Can't wait to see the finished product.

ctrow · 01-19-2010, 04:49 PM

They say chrome won't get you home but it sure does look good!

Got the plenum back a week ago. Just waiting on the rest of the brackets. In the mean time going to get the motor/trans blasted and then painted. Will also do a run up on the engine stand to get it broken in.

mcbassin · 01-19-2010, 05:11 PM

BLING BLING!

custom72c20 · 01-20-2010, 02:59 AM

Nice build! Keep up the great work and cant wait to see more.

**67cheby** · 01-20-2010, 01:32 PM

i wish i would have seen this last week , i was in Edmond on sunday i would have looked you up , nice work

ctrow · 01-21-2010, 08:19 AM

Quote:

Originally Posted by 67cheby

i wish i would have seen this last week , i was in Edmond on sunday i would have looked you up , nice work

Wouldn't have mattered anyway, truck is in Ada at my Dad's shop. But a visit would have been fine just as well. Maybe next time.

*vegaschevy* · 01-27-2010, 04:16 PM

I sent you a PM, Im looking to pull the trigger on these tires for my truck. I was wondering if you had more pics of these wheels and tires mounted on your truck

ctrow · 02-22-2010, 06:12 PM

No real updates, still waiting on the painter. Story of my life it seems like. The new date is looking at April 1 before they are done with it.

Here's a couple of shots that I took last night after playing around with polishing aluminum.

It's my first time and I'm working through my mistakes. I think it will turn our nice though. The center of the gauge panel and glove box door will be painted some color. Either black or grey.

ctrow · 02-22-2010, 06:19 PM

Ordered one gauge just to see what it will look like and to try to match paint colors. I dont want to buy the whole kit at this point.

Here's what I'm going with.

kyull67 · 02-23-2010, 11:39 AM

Those are nice!

ctrow · 02-24-2010, 08:34 AM

I'm liking it!

ChevyIII · 02-24-2010, 09:32 AM

Geez! Subscribed! Nice job!

**LEEVON** · 02-24-2010, 10:45 AM

is that gauge bezel solid aluminum? I've never seen one of those before it's tickles my fancy...

**67cheby** · 02-24-2010, 11:01 AM

man that is killer , very classy

11-25-2009, 09:04 AM	#26
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,820	Re: CTrow's Truck Nice pair of trucks. The ole' former stepside is really coming to life. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-25-2009, 09:50 AM	#27
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: CTrow's Truck Looking good. Personally I wouldnt change the TPI. I would maybe change the block out from a 305 to a 350, but I would leave the TPI especially being since all the electrical is already done. Those are good setups

12-16-2009, 11:42 PM	#28
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck At this point basically waiting on the painter to get done. Taking a lot longer than it should but what can you do, right? I've been mocking up the engine, exhaust (nothing fancy), and have the fuel system mostly setup. I had to clearance the motor mount to use these headers. I also wanted the tuck the exhaust up as much as possible. Next steps, gathering parts for the engine, getting it repainted (silver), then getting it running. Hopefully by the time paint is done it will be just a matter of setting the body on and start putting on parts. Attached Images Last edited by ctrow; 12-16-2009 at 11:42 PM.

12-16-2009, 11:59 PM	#29
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: CTrow's Truck This is an awesome build with a great family history. I actually like the tweed door panels.....so if you want to get rid of them I am close and can take them off your hands. Your truck is looking great with the new wheels/tires. I think your flat bed is a short wheel base one ton. Who is doing your paint? the fenders look great. keep the updates coming. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-17-2009, 12:02 AM	#30
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: CTrow's Truck Looking good! What headers are those? __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-17-2009, 12:02 AM	#31
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck Jason Voth at Resurrection Paint. He's in Noble just at the turn off to Thunder Valley. Thanks for the compliments

12-17-2009, 10:49 PM	#33
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: CTrow's Truck hey what air managment kit are you using for your bags?? __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB Last edited by cstm68; 12-17-2009 at 10:50 PM.

12-18-2009, 10:27 AM	#35
HITAMUDHOLE Registered User Join Date: Nov 2009 Location: BYHALIA, MS Posts: 7	Re: CTrow's Truck Really nice looking, can't wait to see it all in Black. I too love the flatbed truck, very cool tow rig. Those wheels are cool as a fan too, I want to do some wheels like that on mine once I get the rest of the truck done. __________________ 72' C-10 SWB...work in progress. 89' K5 Blazer mud toy, 38.5" Boggers 6" Skyjacker lift, 3/4 ton axles, BEAT UP! 08' Harley Street Bob Denim Blk. Too much to list 90' Z71 Step side DD 09' Rhino Sport blue Can't leave anything stock...

12-19-2009, 12:27 AM	#36
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: CTrow's Truck Great looking truck. Subscribed! Can't wait to see more. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

12-19-2009, 02:26 AM	#37
chevy71c10 Registered User Join Date: Oct 2009 Location: Panama City Beach, FL Posts: 228	Re: CTrow's Truck Very nice build, hope my rolling chassis turns out even 1/2 as nice as yours. Great job. Can't wait to see the finished product. __________________ Justin 71' C10 SWB 00' Dakota R/T 05' Z-71 Silverado 16' Z-71 Silverado Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=376904

01-19-2010, 04:49 PM	#38
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck They say chrome won't get you home but it sure does look good! Got the plenum back a week ago. Just waiting on the rest of the brackets. In the mean time going to get the motor/trans blasted and then painted. Will also do a run up on the engine stand to get it broken in. Attached Images

01-19-2010, 05:11 PM	#39
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: CTrow's Truck BLING BLING! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-20-2010, 02:59 AM	#40
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: CTrow's Truck Nice build! Keep up the great work and cant wait to see more. __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

01-20-2010, 01:32 PM	#41
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: CTrow's Truck i wish i would have seen this last week , i was in Edmond on sunday i would have looked you up , nice work __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-27-2010, 04:16 PM	#43
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: CTrow's Truck I sent you a PM, Im looking to pull the trigger on these tires for my truck. I was wondering if you had more pics of these wheels and tires mounted on your truck



Register or Log In To remove these advertisements.

02-22-2010, 06:12 PM	#44
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck No real updates, still waiting on the painter. Story of my life it seems like. The new date is looking at April 1 before they are done with it. Here's a couple of shots that I took last night after playing around with polishing aluminum. It's my first time and I'm working through my mistakes. I think it will turn our nice though. The center of the gauge panel and glove box door will be painted some color. Either black or grey. Attached Images

02-22-2010, 06:19 PM	#45
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck Ordered one gauge just to see what it will look like and to try to match paint colors. I dont want to buy the whole kit at this point. Here's what I'm going with. Attached Images

02-23-2010, 11:39 AM	#46
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: CTrow's Truck Those are nice! __________________ The first '67 The current '67 '63 Biscayne

02-24-2010, 08:34 AM	#47
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: CTrow's Truck I'm liking it! Attached Images

02-24-2010, 09:32 AM	#48
ChevyIII Registered User Join Date: Jan 2010 Location: Baton Rouge, Louisiana Posts: 8	Re: CTrow's Truck Geez! Subscribed! Nice job!

02-24-2010, 10:45 AM	#49
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: CTrow's Truck is that gauge bezel solid aluminum? I've never seen one of those before it's tickles my fancy... __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

02-24-2010, 11:01 AM	#50
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: CTrow's Truck man that is killer , very classy __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.