Porterbuilt Hood Hinges for 67-72 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nastyc10 · 11-18-2009, 02:30 AM

I'm waiting for mine too. cant wait to get them!

PBFAB.COM · 11-18-2009, 11:22 AM

Update:

I have all the hinge kits boxed up and ready to go... just waiting on the machined spacers for the hinge arm. I was supposed to have them by last Friday (the day I had planned to ship 10 kits), but they were delayed. According to the USPS tracking I should see them today. I will let everybody know when the kits leave!

oregondunerz · 11-18-2009, 03:24 PM

Hey Nate, what's the status of your website? Is it gonna be up and running pretty soon? Can't wait to check it out!

Rokcrln · 11-22-2009, 12:14 AM

Quote:

Originally Posted by oregondunerz

Hey Nate, what's the status of your website? Is it gonna be up and running pretty soon? Can't wait to check it out!

I have seen the new site in the works and it will be very cool and user friendly so Nate can try and keep up with his own new products

I too have a set of the hood hinges coming for my 72 4 Door Tahoe. I will be doing a full How-to on the install as well. I have also had conversation with Nate on the gas strut set up and it sounds like it will be a nice easy add on to the new hinges. I will put up a link in this thread when the write up is done or you can check back with the main build Here!

Kevin
LFD Inc.

PBFAB.COM · 11-23-2009, 01:38 AM

Here's a link to the hood hinge installation instructions:

http://porterbuiltstreetrods.com/site/?p=98

Rokcrln · 11-23-2009, 12:28 PM

Quote:

Originally Posted by porterbuilt

Here's a link to the hood hinge installation instructions:

http://porterbuiltstreetrods.com/site/?p=98

Very good,can't wait to try out the set when they come.

Kevin
LFD Inc.

nastyc10 · 11-23-2009, 01:55 PM

awesome! the website is lookin good. I can't wait to get them in!

98L150 · 11-23-2009, 03:14 PM

looks easy enough, cant wait for them to come in

*Puropedo* · 11-23-2009, 11:38 PM

Quote:

Originally Posted by 98L150

looks easy enough, cant wait for them to come in

X2

98L150 · 11-25-2009, 11:26 AM

got my kit in yesterday and these hingles look very cool

now to get a few other projects done so i can get tehse on the burban.

nastyc10 · 11-25-2009, 12:48 PM

I got mine yesterday too. They look cool. Hopefully I can get them on this weekend!

**67cheby** · 11-25-2009, 12:59 PM

now i am getting jealous, there were not an PB boxes for me yesterday !!

*Puropedo* · 11-26-2009, 12:31 AM

Nate, where are mine?...

......

Rokcrln · 12-02-2009, 02:51 AM

Mine showed up tonight!! I hope to have a chance to do the install and write up by mid next week if not sooner.
Have you guys seen what comes in the kit? Quality cut and welded parts, machined bushings and a but load of SS nuts, bolts, flat washers and lock washers. Out of all the hardware the only things that are not SS are the two pivot bolt sets and I assume that is just because SS does not have a ware rate like Non SS does. Definitely well worth what the asking price is and then some.
Thanks Nate for another Great product!

Kevin
LFD Inc.

[IMG]

[/IMG]

*Puropedo* · 12-02-2009, 03:06 AM

Nate, today you made Puropedo really happy,,,

, I love the quality of your product, thanks buddy!

nastyc10 · 12-02-2009, 03:38 AM

I already got mine installed. I'll try to get some pics as soon as I get a chance. Check and make sure your bolts screw into the nuts welded to the back of the plate that welds to the hood. I had some issues with mine. The Hood lined up great!

C20-67_N_MO · 12-02-2009, 08:18 AM

I'll buy when the gas strut option is available.

The rest of the parts look TOP NOTCH!!

**N2TRUX** · 12-02-2009, 09:00 AM

Quote:

Originally Posted by nastyc10

I already got mine installed....:

You know the drill....with out pics, it didn't happen...

nastyc10 · 12-02-2009, 02:33 PM

here ya go

nastyc10 · 12-02-2009, 02:35 PM

I have a little piece of wood holding the front up so I can get my fingers in there to lift it. Without springs it doesn't pop up when you unlatch it.

Bazooka · 12-02-2009, 02:42 PM

Looking good

Will wait anxiously for a verision for my 63

need them for the 29" - 29.5" Bias plys I might run..

Rokcrln · 12-03-2009, 02:01 AM

PorterBuilt's
DropMember Hood Hinges

How-To
LFD style

Here you go! Link

Kevin
LFD Inc.

**lolife99** · 12-03-2009, 07:43 PM

Quote:

Originally Posted by nastyc10

here ya go

Nastyc10,... I really like your truck!!!

nastyc10 · 12-04-2009, 02:47 AM

thanks man!

*Puropedo* · 12-04-2009, 03:30 AM

You are right lowlife99 that is a sweet bad-a$$ ride...Nastyc10, what is your wheel/tire set up? If you dont mind telling us.

11-18-2009, 02:30 AM	#26
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 I'm waiting for mine too. cant wait to get them!

11-18-2009, 11:22 AM	#27
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt Hood Hinges for 67-72 Update: I have all the hinge kits boxed up and ready to go... just waiting on the machined spacers for the hinge arm. I was supposed to have them by last Friday (the day I had planned to ship 10 kits), but they were delayed. According to the USPS tracking I should see them today. I will let everybody know when the kits leave! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

11-18-2009, 03:24 PM	#28
oregondunerz Registered User Join Date: May 2009 Location: Oregon Posts: 91	Re: Porterbuilt Hood Hinges for 67-72 Hey Nate, what's the status of your website? Is it gonna be up and running pretty soon? Can't wait to check it out!

11-23-2009, 01:38 AM	#30
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt Hood Hinges for 67-72 Here's a link to the hood hinge installation instructions: http://porterbuiltstreetrods.com/site/?p=98 __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

11-23-2009, 01:55 PM	#32
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 awesome! the website is lookin good. I can't wait to get them in!

11-23-2009, 03:14 PM	#33
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Porterbuilt Hood Hinges for 67-72 looks easy enough, cant wait for them to come in __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-25-2009, 11:26 AM	#35
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Porterbuilt Hood Hinges for 67-72 got my kit in yesterday and these hingles look very cool now to get a few other projects done so i can get tehse on the burban. __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-25-2009, 12:48 PM	#36
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 I got mine yesterday too. They look cool. Hopefully I can get them on this weekend!

11-25-2009, 12:59 PM	#37
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Porterbuilt Hood Hinges for 67-72 now i am getting jealous, there were not an PB boxes for me yesterday !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-26-2009, 12:31 AM	#38
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Porterbuilt Hood Hinges for 67-72 Nate, where are mine?.........

12-02-2009, 02:51 AM	#39
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Porterbuilt Hood Hinges for 67-72 Mine showed up tonight!! I hope to have a chance to do the install and write up by mid next week if not sooner. Have you guys seen what comes in the kit? Quality cut and welded parts, machined bushings and a but load of SS nuts, bolts, flat washers and lock washers. Out of all the hardware the only things that are not SS are the two pivot bolt sets and I assume that is just because SS does not have a ware rate like Non SS does. Definitely well worth what the asking price is and then some. Thanks Nate for another Great product! Kevin LFD Inc. [IMG][/IMG]

12-02-2009, 03:06 AM	#40
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Porterbuilt Hood Hinges for 67-72 Nate, today you made Puropedo really happy,,,, I love the quality of your product, thanks buddy! Last edited by Puropedo; 02-25-2011 at 02:02 PM.

12-02-2009, 03:38 AM	#41
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 I already got mine installed. I'll try to get some pics as soon as I get a chance. Check and make sure your bolts screw into the nuts welded to the back of the plate that welds to the hood. I had some issues with mine. The Hood lined up great!

12-02-2009, 08:18 AM	#42
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Porterbuilt Hood Hinges for 67-72 I'll buy when the gas strut option is available. The rest of the parts look TOP NOTCH!! __________________ Coming Soon: Project 1970 Country Truck

12-02-2009, 02:33 PM	#44
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 here ya go



Register or Log In To remove these advertisements.

12-02-2009, 02:35 PM	#45
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 I have a little piece of wood holding the front up so I can get my fingers in there to lift it. Without springs it doesn't pop up when you unlatch it.

12-02-2009, 02:42 PM	#46
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Porterbuilt Hood Hinges for 67-72 Looking good Will wait anxiously for a verision for my 63 need them for the 29" - 29.5" Bias plys I might run..

12-03-2009, 02:01 AM	#47
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Porterbuilt Hood Hinges for 67-72 PorterBuilt's DropMember Hood Hinges How-To LFD style Here you go! Link Kevin LFD Inc.

12-04-2009, 02:47 AM	#49
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Porterbuilt Hood Hinges for 67-72 thanks man!

12-04-2009, 03:30 AM	#50
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: Porterbuilt Hood Hinges for 67-72 You are right lowlife99 that is a sweet bad-a$$ ride...Nastyc10, what is your wheel/tire set up? If you dont mind telling us.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.