Suprachrgd82's 70 BB Longhorn fixxer-upper project - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

suprachrgd82 · 09-08-2016, 09:12 PM

Quote:

Originally Posted by biketopia

Why not just go 18s all around? And in cases of staggered sizes I've always seen a bigger wheel in the back, never vise versa. What are your plans for the suspension and tire size?

Posted via Mobile Device

suprachrgd82 · 09-10-2016, 06:35 PM

New master cyl is on the way

Exhaust will be put on next week - Hedman 2" primaries dumping into 3" with an X and Thrush turbo mufflers

Tank is in

To the best of my knowledge, this is an Eaton rear. Disk conversion is visible by the wheel. Does anyone make a cast heatsink cover?

Mrturner1 · 09-10-2016, 08:40 PM

Quote:

Originally Posted by suprachrgd82

Posted via Mobile Device

The only reason the front wheel is bigger on this truck is they have slicks bolted up for the pic, with a different wheel altogether.

**biketopia** · 09-12-2016, 11:11 AM

Quote:

Originally Posted by Mrturner1

The only reason the front wheel is bigger on this truck is they have slicks bolted up for the pic, with a different wheel altogether.

Exactly

suprachrgd82 · 09-12-2016, 09:17 PM

Classic Industmries order arrived today:

Aus69c20 · 09-13-2016, 07:45 AM

Oooohhh parts. What is it, what is it!

suprachrgd82 · 09-13-2016, 12:01 PM

Quote:

Originally Posted by Aus69c20

Oooohhh parts. What is it, what is it!

suprachrgd82 · 09-14-2016, 12:11 AM

16" rear wheel housings from Classic Industries and a pine wood bed kit from Mark are ordered.

Now to find a shaved door handle opener thingy kit.....

suprachrgd82 · 09-14-2016, 08:50 PM

**Dieselwrencher** · 09-14-2016, 09:30 PM

Nice to see you back on the truck! Do you have a vid of the beast yet? I don't think anyone has a cast rear housing cover available for the eaton rear. I'm sure someone could make one though.

trac209 · 09-14-2016, 10:10 PM

Damn cool truck,always wanted a long horn but they are super rare where I live. I look forward to watching this build

suprachrgd82 · 09-15-2016, 01:15 AM

Wound up getting this:

**Dieselwrencher** · 09-15-2016, 02:45 PM

Very nice!

Zable49 · 09-17-2016, 12:08 AM

Mind me asking, where did you happen to find that diff cover? Best to my knowledge and research nobody really makes anything for our Eaton.

suprachrgd82 · 09-17-2016, 11:55 PM

Quote:

Originally Posted by Zable49

Mind me asking, where did you happen to find that diff cover? Best to my knowledge and research nobody really makes anything for our Eaton.

Sorry, mate, I think I got the last one from their latest production run. Keep watching them and another will likely pop up.

suprachrgd82 · 09-18-2016, 12:08 AM

Brought the truck home today. Now the labor of love really begins.

"Pete's Auto Glass", the shop nextdoor, is one of the retailers of flush mount and single piece side windows. I'm going to replace the roof and shave the driprails, then it'll go to Pete's.

suprachrgd82 · 09-19-2016, 10:45 PM

**Dieselwrencher** · 09-20-2016, 09:18 AM

That rear end cover is awesome! I may have to get one for my k20 project.

suprachrgd82 · 09-26-2016, 11:36 PM

Did a colonoscopy of the rear end to make sure it in good shape. Confirmed a locker and 4.10 gears. Installed the diff cover and throttle return spring.

suprachrgd82 · 09-29-2016, 12:07 AM

**Dieselwrencher** · 09-29-2016, 08:49 PM

Very nice! I'm interested to hear how well the grill shell fits the fenders and hood.

suprachrgd82 · 11-26-2016, 02:31 AM

I removed all of the rotten wood bed and peeked back at the rear axle while driving. The axle wrap was horrible. It was twisting way up under acceleration. I'm counting on these to solve that problem:

b.sharp · 11-29-2016, 11:21 PM

Any idea what parts they used to put disk brakes on the Eaton rear end? I wouldn't mind doing this on my Eaton rear.

Thanks,

Quote:

Originally Posted by suprachrgd82

New master cyl is on the way

Exhaust will be put on next week - Hedman 2" primaries dumping into 3" with an X and Thrush turbo mufflers

Tank is in

To the best of my knowledge, this is an Eaton rear. Disk conversion is visible by the wheel. Does anyone make a cast heatsink cover?

suprachrgd82 · 12-05-2016, 03:00 AM

b.sharp -

Not sure which kit the PO used on mine, but here's a set: http://www.ruffstuffspecialties.com/...g/EHO5272.html

suprachrgd82 · 12-10-2016, 08:33 PM

09-10-2016, 06:35 PM	#27
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project New master cyl is on the way Exhaust will be put on next week - Hedman 2" primaries dumping into 3" with an X and Thrush turbo mufflers Tank is in To the best of my knowledge, this is an Eaton rear. Disk conversion is visible by the wheel. Does anyone make a cast heatsink cover?

09-12-2016, 09:17 PM	#30
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Classic Industmries order arrived today:

09-13-2016, 07:45 AM	#31
Aus69c20 Registered User Join Date: Jun 2015 Location: Melbourne, Australia Posts: 231	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Oooohhh parts. What is it, what is it! __________________ John 69 c20, 396, th400, dana60, ps, ac

09-14-2016, 12:11 AM	#33
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project 16" rear wheel housings from Classic Industries and a pine wood bed kit from Mark are ordered. Now to find a shaved door handle opener thingy kit.....

09-14-2016, 08:50 PM	#34
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project

09-14-2016, 09:30 PM	#35
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Nice to see you back on the truck! Do you have a vid of the beast yet? I don't think anyone has a cast rear housing cover available for the eaton rear. I'm sure someone could make one though. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-14-2016, 10:10 PM	#36
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Damn cool truck,always wanted a long horn but they are super rare where I live. I look forward to watching this build

09-15-2016, 01:15 AM	#37
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Wound up getting this:

09-15-2016, 02:45 PM	#38
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Very nice! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-17-2016, 12:08 AM	#39
Zable49 Registered User Join Date: Jun 2007 Location: Lacey, Wa Posts: 181	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Mind me asking, where did you happen to find that diff cover? Best to my knowledge and research nobody really makes anything for our Eaton. __________________ 1970 C20 Camper Special SBC350 / TH350 '84 C20 Front Disc Brakes/Control Arms

09-18-2016, 12:08 AM	#41
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Brought the truck home today. Now the labor of love really begins. "Pete's Auto Glass", the shop nextdoor, is one of the retailers of flush mount and single piece side windows. I'm going to replace the roof and shave the driprails, then it'll go to Pete's.

09-19-2016, 10:45 PM	#42
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project

09-20-2016, 09:18 AM	#43
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project That rear end cover is awesome! I may have to get one for my k20 project. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-26-2016, 11:36 PM	#44
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Did a colonoscopy of the rear end to make sure it in good shape. Confirmed a locker and 4.10 gears. Installed the diff cover and throttle return spring.

09-29-2016, 12:07 AM	#45
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project



Register or Log In To remove these advertisements.

09-29-2016, 08:49 PM	#46
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project Very nice! I'm interested to hear how well the grill shell fits the fenders and hood. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-26-2016, 02:31 AM	#47
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project I removed all of the rotten wood bed and peeked back at the rear axle while driving. The axle wrap was horrible. It was twisting way up under acceleration. I'm counting on these to solve that problem:

12-05-2016, 03:00 AM	#49
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project b.sharp - Not sure which kit the PO used on mine, but here's a set: http://www.ruffstuffspecialties.com/...g/EHO5272.html

12-10-2016, 08:33 PM	#50
suprachrgd82 Farmtruck desciple Join Date: May 2009 Location: 90605 Posts: 158	Re: Suprachrgd82's 70 BB Longhorn fixxer-upper project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.