1986 GMC Sierra Classic LWB build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qu1cks1lver56 · 01-19-2010, 11:26 PM

Yeah, I'm not risking scratching these up. Aluminum is easy enough to mess up anyway.

mcbassin · 01-20-2010, 01:25 AM

Looking Good!

qu1cks1lver56 · 01-20-2010, 01:56 AM

Thanks!

qu1cks1lver56 · 01-21-2010, 12:52 PM

So the water pump decided to go bad. The block is from a 92, so we got a 92 water pump. And the 86 brackets don't go with a 92 water pump. And a 92 pump is for a serp setup. So now I gotta go to the junkyard and go raid some 90's trucks and get the whole serpentine setup off the front of a motor. Which is fine I guess since I wanted a 6 groove setup anyway so I could get a better alternator from DC Power Inc.

Scootin 81 C20 · 01-21-2010, 08:32 PM

Damn!!! Your truck is looking sharper every time that I look at it. BTW, you never did show me what you did to the grille that was on it before the billet one.

qu1cks1lver56 · 01-21-2010, 08:35 PM

Ahh I forgot to take pics of it, when I get back to the shop I'll snap a few pics of it. I never finished it, but I can show you the progress I made on it and you can pretty much figure out where I was going with it.

edit: and thanks man.

Scootin 81 C20 · 01-21-2010, 08:41 PM

Cool. Would you mind if I make a suggestion for some exhaust tips?

qu1cks1lver56 · 01-21-2010, 09:50 PM

Please do. I haven't decided what I want to do with 'em, that's why I left the pipes long like they are so I have enough to work with when I buy some tips.

Scootin 81 C20 · 01-21-2010, 10:54 PM

I think it would look good a pair of megaphones sticking out the back.

qu1cks1lver56 · 01-21-2010, 11:36 PM

Megaphones? Have a link?

Scootin 81 C20 · 01-21-2010, 11:43 PM

They're the ones in this picture. They're really common on Challenger T/A's and Plymouth Cuda AAR's.

http://www.allpar.com/photos/dodge/challenger/TA.jpg

qu1cks1lver56 · 01-22-2010, 12:21 AM

Ahh ok. Yeah those might look pretty good.

Scootin 81 C20 · 01-22-2010, 12:25 AM

Or you could get ones like mine has. Mine have the rolled lip. I want to get another set of them for the loudest truck contest and stretch a piece of piano wire inside of them.

qu1cks1lver56 · 01-22-2010, 12:38 AM

Pics of your truck?

Scootin 81 C20 · 01-22-2010, 01:41 AM

Here's the best ones I have so far that show the tips.

One with the tips from when it still had the topper on it.

qu1cks1lver56 · 01-22-2010, 01:48 AM

Those don't look bad at all. I like 'em.

I was in the FFA when I was in high school.

Jonboy · 01-22-2010, 10:25 AM

It looks like you are making good progress Nice truck!

qu1cks1lver56 · 01-22-2010, 11:50 PM

Thanks, made lots of progress today, pics will be uploaded tomorrow.
Got an serpentine setup now though

qu1cks1lver56 · 01-23-2010, 10:39 PM

Serpentine swap is complete. Have some pics but my phone is dead. Will post them tomorrow.

hotrod_991 · 01-23-2010, 11:29 PM

looks damn nice man keeps me motivated for my last few months over here to get home and start building mine. Keep up the good work

qu1cks1lver56 · 01-23-2010, 11:34 PM

Thanks man.

qu1cks1lver56 · 01-24-2010, 10:38 PM

Got my Grant wheel installed

Tach I installed a while back

I know my door jams aren't painted, yet. That's on the way. Those "buddy" paint job deals..

Scootin 81 C20 · 01-25-2010, 07:34 PM

I envy you. You have fully working gas gauge. How hard was the grant wheel to install? I've been looking at the chrome 3 spoker at AutoZone and wanted to know how hard they are to install?

mcbassin · 01-25-2010, 07:37 PM

Sweet Progress! Digging that wheel and Tach

qu1cks1lver56 · 01-25-2010, 08:06 PM

Quote:

Originally Posted by Scootin 81 C20

I envy you. You have fully working gas gauge. How hard was the grant wheel to install? I've been looking at the chrome 3 spoker at AutoZone and wanted to know how hard they are to install?

Haha That's the only factory gauge that works right. Well the volt gauge works too.

The wheel was pretty easy to install, need a puller, some sockets, and some patience.

Quote:

Originally Posted by mcbassin

Sweet Progress! Digging that wheel and Tach

Thanks!

01-19-2010, 11:26 PM	#26
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Yeah, I'm not risking scratching these up. Aluminum is easy enough to mess up anyway.

01-20-2010, 01:25 AM	#27
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1986 GMC Sierra Classic LWB build Looking Good! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-20-2010, 01:56 AM	#28
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Thanks!

01-21-2010, 12:52 PM	#29
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build So the water pump decided to go bad. The block is from a 92, so we got a 92 water pump. And the 86 brackets don't go with a 92 water pump. And a 92 pump is for a serp setup. So now I gotta go to the junkyard and go raid some 90's trucks and get the whole serpentine setup off the front of a motor. Which is fine I guess since I wanted a 6 groove setup anyway so I could get a better alternator from DC Power Inc.

01-21-2010, 08:32 PM	#30
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build Damn!!! Your truck is looking sharper every time that I look at it. BTW, you never did show me what you did to the grille that was on it before the billet one. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-21-2010, 08:35 PM	#31
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Ahh I forgot to take pics of it, when I get back to the shop I'll snap a few pics of it. I never finished it, but I can show you the progress I made on it and you can pretty much figure out where I was going with it. edit: and thanks man. Last edited by qu1cks1lver56; 01-21-2010 at 08:38 PM.

01-21-2010, 08:41 PM	#32
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build Cool. Would you mind if I make a suggestion for some exhaust tips? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-21-2010, 09:50 PM	#33
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Please do. I haven't decided what I want to do with 'em, that's why I left the pipes long like they are so I have enough to work with when I buy some tips. Last edited by qu1cks1lver56; 01-21-2010 at 09:52 PM.

01-21-2010, 10:54 PM	#34
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build I think it would look good a pair of megaphones sticking out the back. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-21-2010, 11:36 PM	#35
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Megaphones? Have a link?

01-21-2010, 11:43 PM	#36
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build They're the ones in this picture. They're really common on Challenger T/A's and Plymouth Cuda AAR's. http://www.allpar.com/photos/dodge/challenger/TA.jpg __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy. Last edited by Scootin 81 C20; 01-21-2010 at 11:43 PM.

01-22-2010, 12:21 AM	#37
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Ahh ok. Yeah those might look pretty good.

01-22-2010, 12:25 AM	#38
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build Or you could get ones like mine has. Mine have the rolled lip. I want to get another set of them for the loudest truck contest and stretch a piece of piano wire inside of them. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-22-2010, 12:38 AM	#39
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Pics of your truck?

01-22-2010, 01:41 AM	#40
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build Here's the best ones I have so far that show the tips. One with the tips from when it still had the topper on it. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy. Last edited by Scootin 81 C20; 01-22-2010 at 01:44 AM.



Register or Log In To remove these advertisements.

01-22-2010, 01:48 AM	#41
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Those don't look bad at all. I like 'em. I was in the FFA when I was in high school.

01-22-2010, 10:25 AM	#42
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 1986 GMC Sierra Classic LWB build It looks like you are making good progress Nice truck! __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-22-2010, 11:50 PM	#43
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Thanks, made lots of progress today, pics will be uploaded tomorrow. Got an serpentine setup now though

01-23-2010, 10:39 PM	#44
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Serpentine swap is complete. Have some pics but my phone is dead. Will post them tomorrow.

01-23-2010, 11:29 PM	#45
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: 1986 GMC Sierra Classic LWB build looks damn nice man keeps me motivated for my last few months over here to get home and start building mine. Keep up the good work __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

01-23-2010, 11:34 PM	#46
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Thanks man. __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526

01-24-2010, 10:38 PM	#47
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: 1986 GMC Sierra Classic LWB build Got my Grant wheel installed Tach I installed a while back I know my door jams aren't painted, yet. That's on the way. Those "buddy" paint job deals.. __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526 Last edited by qu1cks1lver56; 01-24-2010 at 10:39 PM.

01-25-2010, 07:34 PM	#48
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 1986 GMC Sierra Classic LWB build I envy you. You have fully working gas gauge. How hard was the grant wheel to install? I've been looking at the chrome 3 spoker at AutoZone and wanted to know how hard they are to install? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

01-25-2010, 07:37 PM	#49
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1986 GMC Sierra Classic LWB build Sweet Progress! Digging that wheel and Tach __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.