header ground clearance - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigboybodry · 01-01-2012, 02:19 AM

Quote:

Originally Posted by redsled87

Your truck looks bad bigboy. I'm going to be running the energy suspension mounts not, the solid ones. But, it still looks like I'm going to have some issues.

Thanks! If you are running the hooker super comps you probably are I am going to have the chassis man build me a set when/if he ever gets to the roll cage and anti roll. They are high dollar though, he says in the 1200-1500 range for ss set. I am thinking of a f2 charger pump gas setup next so I guess it will be woth it in the long run.

redsled87 · 01-01-2012, 11:45 PM

Quote:

Originally Posted by bigboybodry

Thanks! If you are running the hooker super comps you probably are I am going to have the chassis man build me a set when/if he ever gets to the roll cage and anti roll. They are high dollar though, he says in the 1200-1500 range for ss set. I am thinking of a f2 charger pump gas setup next so I guess it will be woth it in the long run.

Yes, I have the Hooker Super Comps. If I can, I may modify them to get more clearence. I may shorten them a little. Or, I may buy Chevelle headers instead.

bigboybodry · 01-02-2012, 12:17 AM

Quote:

Originally Posted by redsled87

Yes, I have the Hooker Super Comps. If I can, I may modify them to get more clearence. I may shorten them a little. Or, I may buy Chevelle headers instead.

I would like to see a pic of the 2" chevelle headers with soild mounts before I have
custom ones built. keep us poasted.

redsled87 · 01-12-2012, 09:23 AM

I don't see it happening right now. I just gave the machine shop $1700 for a Scat forged stroker kit. The original forged crank was cracked. Hopefully it will be together for the racing season in time.

RICKSRAT · 01-25-2012, 11:23 PM

Bigboybodry ,
Pics of my 71 with Chevelle Hooker comp #2455 2" x 3 1/2 w/ 3 1/2 bullets and POL tubular motor mounts .

redsled87 · 01-26-2012, 10:15 AM

Quote:

Originally Posted by RICKSRAT

Bigboybodry ,
Pics of my 71 with Chevelle Hooker comp #2455 2" x 3 1/2 w/ 3 1/2 bullets and POL tubular motor mounts .

I think that I'm going to put them on mine when I get the chance. Do you have another shot of it?

bigboybodry · 01-26-2012, 10:51 AM

any pics at the frame engine mount area?

01-12-2012, 09:23 AM	#29
redsled87 Registered User Join Date: Dec 2011 Location: Lanc Co PA Posts: 226	Re: header ground clearance I don't see it happening right now. I just gave the machine shop $1700 for a Scat forged stroker kit. The original forged crank was cracked. Hopefully it will be together for the racing season in time. __________________ 1987 R10 Pump Gas 496/TH375 Best 1/4 pass to date 60' 1.49 1/4 10.93 MPH 120

01-25-2012, 11:23 PM	#30
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: header ground clearance Bigboybodry , Pics of my 71 with Chevelle Hooker comp #2455 2" x 3 1/2 w/ 3 1/2 bullets and POL tubular motor mounts . Attached Images __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32

01-26-2012, 10:51 AM	#32
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: header ground clearance any pics at the frame engine mount area? __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.