WY Gear Vendors overdrive complete setup - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 02-11-2011, 12:39 AM

Just went out and looked at the Ramsey pto drive and there may be clearance issues with that and a gearvendors. Here is a pic:

*sharpie1972* · 02-11-2011, 12:54 AM

Yep, that a serious PTO! How far does it stick back? Some of the GV adapters are pretty long. Are you talking to GV or a fab shop about the adapter? Sharpie

Vintage Windmills · 02-13-2011, 11:59 AM

The PTO sticks out 12". I haven't talked to gearvendors yet but definitely plan to, even if i use one of my local machinists to make the adapter.

Lafnbowtie · 03-09-2011, 01:22 AM

Quote:

Originally Posted by sharpie1972

Yep, the whole truck. Apparently they love square bodied big blocks over there. I thought the guy was a scammer, but he rolled in from Denver with a stack of Benjamins. I've got another GV unit for the same money. It was behind a 205 case with an automatic. In good shape. Thanks, Sharpie

Hello, do you still have the second GV forsale? I have a '85 GMC 4wd 3500, auto and the 205 , would this be the right GV that you have? Thx for your time.

*sharpie1972* · 03-09-2011, 08:35 AM

Yes, it would be the correct unit. Thanks, Sharpie

sircharles50 · 05-07-2011, 01:54 PM

do you still have the 205 adapter forsale.

thanks

*sharpie1972* · 05-08-2011, 09:15 AM

Yes, complete Gear Vendors set up from a NP205 TH350 rig. Thanks, Sharpie

sircharles50 · 05-08-2011, 10:57 AM

are you selling adapter seperate, if so how much and how much for the whole setup.

thanks

*sharpie1972* · 05-08-2011, 01:18 PM

Not selling the adapter seperate. $1500 shipped on the complete setup including electronic controller. Thanks, Sharpie

72freak · 05-08-2011, 02:36 PM

So with the correct adapter this would bolt right up to a 2x4 TB350...correct?
I am thinking of using one on the below.

sircharles50 · 05-08-2011, 09:56 PM

what is condition and is everything their to just bolt in, shorten my drive shaft and ready to go.

sircharles50 · 05-08-2011, 10:02 PM

what is condition and is everything their to just bolt in, shorten my drive shaft and ready to go.

*sharpie1972* · 05-08-2011, 11:35 PM

Quote:

Originally Posted by 72freak

So with the correct adapter this would bolt right up to a 2x4 TB350...correct?
I am thinking of using one on the below.

Yes, with the correct adater you can use a GV unit on just about any rig. Thanks, Sharpie

*sharpie1972* · 05-08-2011, 11:37 PM

Quote:

Originally Posted by sircharles50

what is condition and is everything their to just bolt in, shorten my drive shaft and ready to go.

Yes, this is a complete setup from a running and driving rig. Everything is there to bolt up and go. Thanks, Sharpie

71WarWagon · 06-12-2011, 01:15 AM

Quote:

Originally Posted by sharpie1972

Yes, this is a complete setup from a running and driving rig. Everything is there to bolt up and go. Thanks, Sharpie

Do you still have this set up? I am interested in the th350/np205 set up you mentioned earlier. Let me know, thanks!

*sharpie1972* · 06-12-2011, 01:47 AM

Quote:

Originally Posted by 71WarWagon

Do you still have this set up? I am interested in the th350/np205 set up you mentioned earlier. Let me know, thanks!

TH350/NP205 setup still available. Thanks, Sharpie

sircharles50 · 06-12-2011, 10:33 AM

do you any picture of the parts

71WarWagon · 06-12-2011, 05:10 PM

Quote:

Originally Posted by sharpie1972

TH350/NP205 setup still available. Thanks, Sharpie

PM coming.....

gtdownonit · 01-22-2012, 01:20 AM

Is it still for sale?

*sharpie1972* · 01-22-2012, 07:18 PM

Long gone. Thanks, Sharpie

02-11-2011, 12:39 AM	#26
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup Just went out and looked at the Ramsey pto drive and there may be clearance issues with that and a gearvendors. Here is a pic: Attached Images __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-11-2011, 12:54 AM	#27
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Yep, that a serious PTO! How far does it stick back? Some of the GV adapters are pretty long. Are you talking to GV or a fab shop about the adapter? Sharpie

02-13-2011, 11:59 AM	#28
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Gear Vendors overdrive complete setup The PTO sticks out 12". I haven't talked to gearvendors yet but definitely plan to, even if i use one of my local machinists to make the adapter. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-09-2011, 08:35 AM	#30
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Yes, it would be the correct unit. Thanks, Sharpie

05-07-2011, 01:54 PM	#31
sircharles50 Registered User Join Date: May 2011 Location: tacoma Posts: 5	Re: Gear Vendors overdrive complete setup do you still have the 205 adapter forsale. thanks

05-08-2011, 09:15 AM	#32
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Yes, complete Gear Vendors set up from a NP205 TH350 rig. Thanks, Sharpie

05-08-2011, 10:57 AM	#33
sircharles50 Registered User Join Date: May 2011 Location: tacoma Posts: 5	Re: Gear Vendors overdrive complete setup are you selling adapter seperate, if so how much and how much for the whole setup. thanks

05-08-2011, 01:18 PM	#34
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Not selling the adapter seperate. $1500 shipped on the complete setup including electronic controller. Thanks, Sharpie

05-08-2011, 02:36 PM	#35
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Gear Vendors overdrive complete setup So with the correct adapter this would bolt right up to a 2x4 TB350...correct? I am thinking of using one on the below. Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! Last edited by 72freak; 05-08-2011 at 02:36 PM.

05-08-2011, 09:56 PM	#36
sircharles50 Registered User Join Date: May 2011 Location: tacoma Posts: 5	Re: Gear Vendors overdrive complete setup what is condition and is everything their to just bolt in, shorten my drive shaft and ready to go.

05-08-2011, 10:02 PM	#37
sircharles50 Registered User Join Date: May 2011 Location: tacoma Posts: 5	Re: Gear Vendors overdrive complete setup what is condition and is everything their to just bolt in, shorten my drive shaft and ready to go.

06-12-2011, 10:33 AM	#42
sircharles50 Registered User Join Date: May 2011 Location: tacoma Posts: 5	Re: Gear Vendors overdrive complete setup do you any picture of the parts

01-22-2012, 01:20 AM	#44
gtdownonit Registered User Join Date: Oct 2010 Location: denver co Posts: 27	Re: Gear Vendors overdrive complete setup Is it still for sale?

01-22-2012, 07:18 PM	#45
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Gear Vendors overdrive complete setup Long gone. Thanks, Sharpie

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.